Database Info

Help Me Please Upgrading :(

I'm trying to upgrade my I-mate Jamin (G3)
I followed this guide :
http://forum.xda-developers.com/showthread.php?t=310452
The first 5 steps went successful, and I've tried installing multiple ROM's like :
Transformer 1.1
Touch VII
and both ROMs are giving me same error on command prompt ( although in the end it comes as successful upgrade ) and this popup of "SUCCESS" comes on my device while upgrading.
the error i'm getting on command prompt i'm getting is :
Writing the new CrossBow OS Rom ...
Copying C:\Downlo~2\itsutils.dll to WEC:\windows\ItsUtils.dll
could not update Itsutils.dll to the current version, maybe it is inuse ?
try restarting your device, or your active sync.
then that Congratulations msg comes up ~~
I hard reset my device and I'm still on Windows mobile 5
I'm a NOB please help .. tell me what I'm doing wrong ??
Thx.

-Download again all the .zip's from web to the desktop and extract all to desktop again
-disable antivirus and firewall
-run pvtemp.exe(choosse between g3 and g4 depending of your mobile model)
then run the update.bat
it works with me

I think i'm a bigger noob
i didnt unlock CID anyways figured it out .. just installed Transformers 1.1
thx

insufficient system permissions...

When i try to install Pointui 1.5a on Dr. Gonzo's WM6.1 rom i get the following error:
Installation was unsuccesfull. The program or setting cannot be installed because it does not have sufficient system permissions.
What is this.. i havent had this before. Anyone know a fix? I tried the SDA unlocker.
tnx

Try this :
http://www.microsoft.com/downloads/...8C-D587-47E0-908B-09FEE6EA517A&displaylang=en
Bye.

What do i do with that?
It doesnt do anything?

- Download
- Install
- Launch
- Connect device to computer (usb cable)
- Choose "Security off" configuration
- And "Provision"
- It's done

nop mine is still giving that crap message... what now?

What is message ?

I got it figured out! it was because i had it already instaled on my SD card sorry!

installation error on HTC HD2
fireburned said:
What is message ?
Click to expand...
Click to collapse
i am still getting this message when i try to install voice commander
" Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
any thought??
HTC HD2
tmobile version
original Rom

You need to unlock it. My phone can be successfully unlocked only by Orange's cab, then i can do anything with registy or files in /Windows.

Fieldtest app cannot be installed

I've heard that Android originally includes Fieldtest app,which shows detailed info about mobile network etc. However SE has removed it from X10.
But i managed to find 2 different fieldtest.apk files on the net and tried to install them. Unfortunately both of them failed to install with the error message "this application cannot be installed on this phone". I've rooted my phone and tried again but still the same failure. What could the problem be and could it be fixed somehow?
Also failed to install via adb.

Still in need of solution for this.

clrcad.exe not working

clrcad.exe not working when I try to use it before starting android 2.2 on my htc hd2. need help thanks

I had the same problem as well, hoping for a solution

+1
Same here, I run it before launching linux but still have teh same audio problem.

bump.
Anybody know what problem is?

bumpin...
same problem here.

hm. No help huh...
I've got the same problem.

ditto... i think we need some support over here lol

I can't run it any more - it says "CLRCAD cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found... blah blah" I've tried deleting it and copying over a new copy but it still doesn't work - it worked the first couple of times though?

I have the same problem. And even more: after trying run clrcad.exe now I can't run any exe from sd card!

Solution to CLRCAD.exe will not execute.
I have an HTC HD2. I have been playing around with different android builds for the last week. About two days ago CLRCAD.exe stopped working for me. I ignored it and continued to load. It was only when I got an extemely garbbled called that I realized how important it was to have CLRCAD.exe working. I tried reformatting my SD Card with not luck in getting it to work. Tried searching the forum and gave up and googled the problem which in turn lead me to this post and it seems a lot of people have this issue. I don't know the cause yet....but in a flash I thought about doing a factory restore for the windows 6.5. Eureaka!!!!! that solved my problem !!!!!

I done the same thing thinking a factory restore would solve the problem - but no..., it's not recognised on me pc nor my device - keep gettin the error "This is not a windows 32bit application."

same problem here.
Winmob does simply nothing if I click on clrcad.exe. No question if I want to run it or something.
Anybody got any idea what the problem could be?
Hellbanan

edgasket said:
I can't run it any more - it says "CLRCAD cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found... blah blah" I've tried deleting it and copying over a new copy but it still doesn't work - it worked the first couple of times though?
Click to expand...
Click to collapse
Did you resolve this issue? I have the same problem and have searched for the resolution but have not found anything. Help!

Hard Reset worked for me - but still now I have to deal with black-outs (no wake-up screen up)...

Raman HTC hd2
Hi have installed successfully android on htc hd2,but having problem with calls.
i will not able to hear voice of others.
have run the clrad.exe even after, any suggestions ?

This is quite strange, because I have had Froyostone Sense V3.1 running on my stock HD2 for nearly a month without any issues. Then out of the blue, the screen went blank yesterday, so I rebooted, and then tried to run CLRCAD from the Android folder.
I then got "CLRCAD cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found" message. So I downloaded the latest Froyosense, and copied over the system.ext2 and the zImage files, and a clean CLRCAD and HARET. But still I get the same thing. And I get that message on HARET as well.
Does anyone know the cause and best resolution, preferably without the factory reset?

Same issue here too. Interestingly, when I run CLRCAD, i get the same interference on the WMOS as well as ANDROID.

same here.....the exe simply does nothing when i click it.
and i cannot load android at all...............after loading the kernel for a while , the phone rebooted back to WM!!!

I am able to run CLRAD.exe and I know that is normal that nothing happens but I have problem that after loading ANDROID there is no any sound. I also tried to reset factory settings... So is there any solution to this or not?
SOLVED by Kwbr_HD2 ROM, but again stopped working after few reboots!

The first time i excecuted clrcad.exe a message appeared "do you really.. bla bla bla" (u know what i mean) which ich answered with YES. Then some days later i did a reboot and since this time the message didn't appear. But Android works also great without the message. I tryed to figure out if there is running clrcad.exe in wm but i cant see it. So, i have no clue if clrcad.exe is running, but Android works. The Sound is good!

[SOLVED] - [Q] Fujitsu Simens loox N560 died after bad firmware

hi.
I'v got loox n560 that was upgraded to WM6.1-6.5 servel times without any problem.
the last time i did update, i did it accidentally with a bad firmware file(uncompleted download).since then, the device wont boot(just a white screen).and the pc wont recognize it.
any way to save it? or i made myself a nice paper weight?
thanks.

I think there was a way to put the N560 in bootloader mode by pushing some keys and soft-reset hole manually (the "monkey grip" it was called or something similar...) and with the file of the rom to be flashed in a SD card... perhaps you can google for information on this ancient -and more unsure that the cable one- flashing mode. Worth to try it better than have a paperweight...
Good luck!

I give you more information (shame that FIRSTLOOX information is not there anymore)
For manual bootloader mode: press On-Off button + left side button (voice recording) + stylus soft reset (for some seconds). Keep pressed On-Off and recording untill the dolphins appear.
I can't find references to flash from SD card. Anyway, for incomplete flashing, Newplowe gives this procedure:
"You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA."
I got this reference from "http://forum.xda-developers.com/showthread.php?t=429148&highlight=flash+n560+card".
Good luck anyway.

this is very interesting...
i was able to put the device into boot loader mode and ran the command "L c:\os_213u.nbf" ("l" didnt work, but L did).
it did something to the device, a progress bar till the end of the screen.but the device didnt reboot.when i try to run POCKETFLASH program it couldnt connect to the device.
i runing windows 7, so i guess it the problem(ACTIVE SYNC is a XP PROGRAM).
i'll try installing XP on another computer and try this again.
thansks.

almost...
i have installed Windows XP just for this, and everything seems to go well, i connect with MTTY, put the l c:\os_213u.nbf command and the device respond.
the next stage i to flash with PocketLOOXN560FlashTool.
when i start it, i receive connection error, and then i go to recovery mode.the program try to communicate with the device, but i get at the end error that the ROM language is different than the language on the device.it says "(ENGLISH)" and there are also empty
()
Click to expand...
Click to collapse
at the end.
i doubled checked this with the original WM5 English rom, and its the same.
is there a way to change the language with MTTY?
any other ideas? its a shame to stop now after i can get a response from the device...
thanks.

The only idea I have is to check if after the failed flashing your N560 is still an "english" one. Perhaps the defective rom has changed the language of your device to something else...
If your device respond to communication with the XP computer, perhaps you could make a rom dump (in newplowe's page you can got tools for doing that) and check in the dump file with an hex editor which language actually has. You can always check newplowe's blog and forum (with google translator ), or ask him

Sorry i didnt post an update.
i have fixed the rom language.it had a gibberish mark at the end of the ENGLISH, after i have fixed that, .the device was flashed correctly and its working!
thanks for thelp guys