After using the PDAMobiz ROM, can we install an older vers?? - JAMin, XDA Neo, S200 Software Upgrading

Hi everyone!
I'm using the PDAMobiz ROM for the Prophet and although I'm very happy with it, i'd like to know if it is possible to downgrade it to an older ROM, such as Imate's...
Thanks!
Pedro

I too am using the PDAMobiz ROM but would like to revert to the latest iMate, but it is not simple as the version is older. I'm sure there is a way but I haven't been able to find it.

The answer is yes, always you did your CID unlock.

is it possible to unlook a cid with a spl 2.15.00001?

As far as i know, it is possible to go back to ANY 2.15 rom !

Could anyone give me a guide how to downgrade from the pdamobiz-rom?
I cant get another rom to install, it says i cant install the rom because its older than the one installed.
And while we are at it.... What is the newest wwe-rom to a qtek S200 and where can i find it?
mvh lars

ekosbravo said:
is it possible to unlook a cid with a spl 2.15.00001?
Click to expand...
Click to collapse
No it's not possible :roll:

Related

Another please help upgrade thread

Hi everyone. i know this has been hashed and rehashed but searching for it doesnt help and i cant find a solution for this:
i have a french orange spv m600 (just sim unlocked it, thanks lokiwiz!).
unfortunately it is in french and i would like it to be in english (basically english orange rom).
i have
IPL: 2.10.0001
SPL:2.10.0001
Radio Rom:02.07.20
OS:02.10.1.30
its not cid unlocked and since i think its a g4 chip, im very hesitant - i dont want to end up with a break - have no customer support to send to. i dont need a lot of functions.
by any chance anyone has a wwe orange rom around? would that work without cid unlocking?
thanks a lot for helping...
if anyone would like a dump of this french rom, let me know, with instructions how to do it, and ill help you out guys as well...
Thanks a lot for helping
Just take the no vendor id dopod rom wwe from the ftp. It worked great on my G4 SPV M 600. It has also been french.
you have a link?things get moved around very easily on that ftp thanks !
no thats fine, got it
question: how good is it?does it remove the cid unlock so that u can upgrade again afterwards?
what does this rom contain?
munzab said:
no thats fine, got it
question: how good is it?does it remove the cid unlock so that u can upgrade again afterwards?
what does this rom contain?
Click to expand...
Click to collapse
if i were you, i should take the new Qtek Rom:
ftp://[email protected]/Up...rophet_220734_2207114_024721_QtekWWE_Ship.exe
just download it, extract it with WinRar (i know it's a .exe file, but you can extract it) and replace the romupdateutility with this one:
ftp://[email protected]/Up...AKU2.3_LvsW_edition/ROMUpdateUtility_NoID.exe
copy the nk.nbf file in the same folder with the other files and just run the romupdateulityNo_Id.exe to update.
This Rom runs very stable and fast, much faster than the dopod one.
John
do either of those updates change the ipl/spl?no chance of them mismacthing right?
John-Wu said:
This Rom runs very stable and fast, much faster than the dopod one.
Click to expand...
Click to collapse
I haven't noticed any major speed improvement over the Dopod rom. Actually, my machine became slightly more unstable. Maybe it is only a software problem though. I have not reinstalled the applications that are running from the SD card, but I relied on a restore using sprite backup.
Ciao,
G.
thanks
tried the qtek. got a fright when i saw
IPL:2.10.0001
SPL:2.20.0001
but then it worked
now will try the rom and see how it performs. my previous 2 were wizards which i used qtek roms
Thanks!

SPL downgrade on G3

I searched in the forum, always read that SPL cannot be downgrade on G4, but is it possible to do it on G3?
Thanks.
I also want to know.
But no one will answer newbie's question.
Better ask in other forum.
If your device is CID unlocked you can. Search this great! forum my friend.
Look for PDAMobiz Downgrade and Unlock CID.RAR
DoCtOr_X said:
Look for PDAMobiz Downgrade and Unlock CID.RAR
Click to expand...
Click to collapse
what I understand from the wiki is that this process only downgrade on the OS not SPL...
Not a problem
It does not matter if PDAMobiz ROM does downgrade or not the SPL. Once you will load mobiz ROM and then unlock your device, the next time you will be able to install whatever G3 ROM you want. You won't see anymore the RUU's telling you can not downgrade. Startup screen will inspect your device and will only find v1.2, a fake info that enables everything.

Flash ROM for Prophet

Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
-  ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.

IPL G3/G4 upgrade to 2.20

Here are the files to upgrade your IPL to the latest official version:
G3: 2.20.000
G4: 2.20.0001
MAKE SURE YOU USE THE CORRECT FILE AND ONLY UPGRADE IF YOU KNOW WHAT YOU ARE DOING !
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
download G3
download G4
Thx Jesterz
Hi Jesterz,
I flash my Dopod Pro 818 with IPL 2.20.000 and it was change from IPL 3.08.000 to IPL 2.20.000 . I get by mistake IPL 3.08. 000 dan SPL 3.08.000 from another thread in Prophet Upgrading, and now I want to change my SPL lower. Any suggestion?
Regard
Hermanto
I Tried To It !
Thanks
Jesterz, please
Can you find any solution to downgrate SPL? ;(
I have 3.08, and i want to get back to 2.20 ;(
Can you find any solution?... Please!
P4k1t0 said:
Jesterz, please
Can you find any solution to downgrate SPL? ;(
I have 3.08, and i want to get back to 2.20 ;(
Can you find any solution?... Please!
Click to expand...
Click to collapse
unlock CID try the paid service, search for it
Hi,
can anyone tell me what is better with this new IPL-Version?
Ciao
IPL 2.20.000 and SPL 2.20.000 faster than another version
crazyd said:
Hi,
can anyone tell me what is better with this new IPL-Version?
Ciao
Click to expand...
Click to collapse
Hi, crazyd
I have tried many version SPL and IPL on my Dopod Pro 818 like 3.08, 2.15 (from Dopod ) and I think the best version is IPL: 2.20; SPL 2.20. Its easy to upgrade any ROM (G3 ROM) and enjoy the speed
Best Regard From Indonesia
Herman
Dopod Pro 818
IPL : 2.20
SPL: 2.20.000
ROM : Fantastic b4
Testing: PV 4.0.0.0.5a
wonder whats the latest spl version?
panda88 said:
wonder whats the latest spl version?
Click to expand...
Click to collapse
latest official one is 2.20
okie..so whr can i download this version of SPL?
SPL Version 2.2.0
panda88 said:
okie..so whr can i download this version of SPL?
Click to expand...
Click to collapse
Panda,
Read this thread carefully http://forum.xda-developers.com/showthread.php?t=284578 and you can change your SPL version to 2.20.000. Download and flash to your device.
Regard,
Herman
hermantos said:
Panda,
Read this thread carefully http://forum.xda-developers.com/showthread.php?t=284578 and you can change your SPL version to 2.20.000. Download and flash to your device.
Regard,
Herman
Click to expand...
Click to collapse
But, Just upgrate the SPL and not downgrate... right?
Downgrade SPL: 3.08.000 into SPL 2.20.000
P4k1t0 said:
But, Just upgrate the SPL and not downgrate... right?
Click to expand...
Click to collapse
Hello P4k1t0,
I had SPL 3.08.000 on my Dopod 818 pro before, and found jesters ROM upgrade in this thread http://forum.xda-developers.com/showthread.php?t=284578. After flashing with this ROM, my SPL change from 3.08 to 2.20. Hope it can be solve your problem too
Enjoy downgrade your SPL version
Herman
hermantos said:
Hello P4k1t0,
I had SPL 3.08.000 on my Dopod 818 pro before, and found jesters ROM upgrade in this thread http://forum.xda-developers.com/showthread.php?t=284578. After flashing with this ROM, my SPL change from 3.08 to 2.20. Hope it can be solve your problem too
Enjoy downgrade your SPL version
Herman
Click to expand...
Click to collapse
Oh yhhh... thnkxxX
I will try it
Thnkx one more time!
hermantos said:
Panda,
Read this thread carefully http://forum.xda-developers.com/showthread.php?t=284578 and you can change your SPL version to 2.20.000. Download and flash to your device.
Regard,
Herman
Click to expand...
Click to collapse
appreciate that.. was looking for a single file for spl upgrade just like the ipl 2.20
Really Need Help here!!!
first, im a newbie.. -_-
and i hav dopod 818pro (g3).. i've never update roms or anything until i see ipl/spl and radio update.
so i update it (ipl) from 1.00, and now changed into 2.20. but havent update the spl. so it still 1.00.0000..
after update ipl it seems nothing unusual happen, after that i update the radio from (11320) into the recent (2.69.21)
and update success, but the opening screen that only show dopod logo and ipl,spl,os..
bcoz i think there was written "gsm" before the os/ after the spl, but now dissappear..
after that the loading is fine, and show the today screen. and i wanna restart it again to see the ipl,spl,etc..
after i see those, my dopod is restart otomatically and back to the HTC screen, then dopod logo with ipl/spl screen, then restarting again to the HTC screen, dopod logo ipl spl os again..
so how can i fix it bcoz now the today screen not appear alt all.. this restart loading cant reach the main screen/today screen.
so i thought i wanna reinstall the original rom, or maybe rom doesnt hav any connection with ipl/spl? so how, even open the start menu i cant..
need help..
anyway my rom version is 1.0.13.21, ext rom ver is 1.00.13.102..
and one thing, dunno why now it can reach the today screen like usual.
so i juz clear storage and reinstall.. but still showin ipl/spl: 2.20/1.00.0000, gsm is missing, and os: 1.0.13.21..
its juz showin 3 things..
luckily it can show the today screen like usual, but i hav 2 wait 4 long time.. thats not usual.
and the performance of this pda is much slower than before..
and it says no service, or cant make/get a call, sms, and everything related to service provider at all..
bcoz rite now, my pda cant detect anything..
and 1 thing, my battery status always charging, even i dont charge it.
i wanna ask sumthing also, do i need 2 upgrade my rom version before i wan to upgrade into PDAViet rom?
or i can directly upgrade 2 PDAViet from my current rom version?
bcoz i saw sum ppl say, if want to upgrade, must from version 2.00 or earlier..
so i think u guys might know what happen exactly, bcz i juz a newbie..
thanks 4 the help..
Upgrade to Jesters ROM AKU 2.20 or flasing with Dopod RUU 2.15
i wanna ask sumthing also, do i need 2 upgrade my rom version before i wan to upgrade into PDAViet rom?
Hello bLusiLv
You can upgrade your OS using AKU 2.15 from Dopod official sites and it change your version Radio too. Another way, you can upgrade to Jesters ROM with AKU 2.20. After that you can flashing any PDA Viet ROM. Read the howto procedure first and wellcome to flashing addiction forum.
Regards,
Herman
What is the benefit of updated IPL/SPL?
I currently have G4 model with IPL and SPL both version 2.15 (from Dopod latest official rom).
Do I need to upgrade?
Thanks in advance
i think i wanna upgrade to jester AKU 2.20.
but may i do it directly from my version? or i must upgrade to AKU 2.15 first?
and finally i wanna upgrade to PDAViet.
but now my device cant be detected by activesync.
how to resolve this? i heard bout mtty.. i dun understand how to use it..
i really confuse..

mda vario III rom 1.56.0000 or alternative needed

Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
help me
spuniac said:
Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
Click to expand...
Click to collapse
hi there can you help me what software did you use to unlock
Dust2Dust said:
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
Click to expand...
Click to collapse
Not if you flashed Hardspl. The rom will go back to the original rom, but the hardspl will not go back to the stock spl. For that you must find your stock spl and use jumpspl to re-lock your phone to the stock spl and rom.
sameer2515 said:
hi there can you help me what software did you use to unlock
Click to expand...
Click to collapse
Just follow the easy steps here to unlock your phone.
http://forum.xda-developers.com/showthread.php?t=433835

Categories

Resources