I have a Mda II and today after 2 years it stopped charging via the car kit or via electricity . And then it died .
I found I can only charge it via the USB on my computer.
Any ideas how to solve this?
Thanks in advance!
Rafiki
Related
Hi, i am planning to upgrade my imate ppc to WM5. I read the upgrade documents of c_shekhar and he has mentioned we need to have the cradle adapter connected but I dont have the connector. Can I still upgrade my ppc, kindly let me know.
Regards,
Sher
Sher said:
Hi, i am planning to upgrade my imate ppc to WM5. I read the upgrade documents of c_shekhar and he has mentioned we need to have the cradle adapter connected but I dont have the connector. Can I still upgrade my ppc, kindly let me know.
Regards,
Sher
Click to expand...
Click to collapse
Hi there
I did mine with a Sync cable only.
Went 100%. I Had no problems.
I think the only reason why there should be power with th cradle, is if the PPC's battery went flat during a ROM upgrade, it can be disasterous.
But you shouldnt have a problem!
Cheers
also being powered by the pc power could disappear if the pc crashed (or if connected to a unpowered hub along with other devices stealing some of the 500mA that a usb port can max provide)
but if the cradle have the connection to the psu too the chances you can carry on after the pc reboots are bigger
I was concerned about this too - but went ahead anyway with a USB sync cable which i got off ebay, connected to a powered USB hub.
It takes half an hour approx and I had no problems
Hi again!
I got a polaris with an original french sfr rom.
I took my polaris to navigate in car today, and i seen that my car usb charger does not work with it!
It worked with my old prophet, but not with my polaris!
Does anybody had the same problem?
I had the same problem with the prophet with some cooked roms, do you think puting an original Htc rom could fix my problem?
Thanks in advance.
Bruno
Have you tried to plug your polaris only after you have started the car ?
plugging the pda before ignition is not recomended and my cause the charger not to work or you pda to malfunction.
Yep, I also tried with an other sfr'polaris...
I've a problem with in car charger for my tytn II.
It was working fine 'till 2 months ago when it suddenly stopped to work.
TYTN II have no problems with mini USB cable connected to PC and no problem with AC power charger.
I've tried everything, another in car charger(it's from motorola), tried my originate in car charger in another car(which was working earlier and suddenly stopped)...
And just to mentition that some other equipment such as portable dvd player is working just fine in my car.
I'm using sakajama's ROM Hyperdragon III from 3.december...
So, it's really frustrating.
In car charger worked and suddenly stopped,there is still light on it's bottom(tried motorola's in car charger too), AC charger work fine and pc connection too.
Any ideas?
P.S. Also I've tried soft reset TYTn during in car charging but no success
There's loads on here about similar problems, just do a quick search; one thread is this one...
http://forum.xda-developers.com/showthread.php?t=498211
The mini USB is very temperamental, and isn't very robust.
Best bet is to get a proper HTC car charger.
Agree with comments above, bite the bullet and use the offical HTC car charger, worked fine on my TYTN II and also my new Topaz TD2
Hello,
Problem: then i connect my Wizard via USB cable it shows no signs of any connection at all, but battery is charging. I still can sync via bluetooth and IR and it works just fine, but USB is totally dead. Maybe my wizards usb slot is broken ? Any suggestions what to do ?
Best reggards
yolkee
Have you tried another cable?
I have a P3600 (Trinity) with a mini USB socket. Every now and again, the charging light comes on but the USB fails. I reckon the socket or cable end is getting a bit worn/tired out, and only the +5v and ground contacts actually connect. The two centre data lines don't, hence the Activesync error, but the phone is still charging Fiddling with the socket or just pressing it down toward the back of the phone will make it work.
If this doesn't work, maybe the socket has completely had it.
Update to this: Feb 25:- The USB connection has now failed completely. Charges the battery, but ActiveSync cannot connect, other phones are fine using the same cable. No amount of fiddling will get it to work. The device is now assigned to the ever growing pile of electroscrap used as demo machines. Now on a company hand-me-down MWg Zinc II. Not an HTC device, I know, but I won't be leaving the forum.
yolkee said:
Hello,
Problem: then i connect my Wizard via USB cable it shows no signs of any connection at all, but battery is charging. I still can sync via bluetooth and IR and it works just fine, but USB is totally dead. Maybe my wizards usb slot is broken ? Any suggestions what to do ?
Best reggards
yolkee
Click to expand...
Click to collapse
Welcome to forums
Perhaps here you can find your way:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see Wizard section for more help.
Hope it helped,
Hola , my acer tab A510 can't connect to pc after update JB before using ICS it working fine anyone can fix it, there Other problem my charger is broken so I charging using psvita adapter in off mode but it took several hours for 30 % battery anyone can suggest other Adapter because original charger so hard to find. Thanks for your help