Qtek 9100 USB PROBLEM - General Questions and Answers

Hello,
Problem: then i connect my Wizard via USB cable it shows no signs of any connection at all, but battery is charging. I still can sync via bluetooth and IR and it works just fine, but USB is totally dead. Maybe my wizards usb slot is broken ? Any suggestions what to do ?
Best reggards
yolkee

Have you tried another cable?
I have a P3600 (Trinity) with a mini USB socket. Every now and again, the charging light comes on but the USB fails. I reckon the socket or cable end is getting a bit worn/tired out, and only the +5v and ground contacts actually connect. The two centre data lines don't, hence the Activesync error, but the phone is still charging Fiddling with the socket or just pressing it down toward the back of the phone will make it work.
If this doesn't work, maybe the socket has completely had it.
Update to this: Feb 25:- The USB connection has now failed completely. Charges the battery, but ActiveSync cannot connect, other phones are fine using the same cable. No amount of fiddling will get it to work. The device is now assigned to the ever growing pile of electroscrap used as demo machines. Now on a company hand-me-down MWg Zinc II. Not an HTC device, I know, but I won't be leaving the forum.

yolkee said:
Hello,
Problem: then i connect my Wizard via USB cable it shows no signs of any connection at all, but battery is charging. I still can sync via bluetooth and IR and it works just fine, but USB is totally dead. Maybe my wizards usb slot is broken ? Any suggestions what to do ?
Best reggards
yolkee
Click to expand...
Click to collapse
Welcome to forums
Perhaps here you can find your way:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see Wizard section for more help.
Hope it helped,

Related

Problem with USB.

My Desire s won't charge from the adapter.
After connecting to a PC via HTC's cable nothing happens
I also used another USB cable (from external HDD) to connect with the same results.
Can anyone help please?
Install HTC app for Desire S.
w w w.htc.com/www/SupportDownload.aspx?p_id=391&cat=3&dl_id=1073
I don't say that i can't sync my htc. The USB port is totally dead on the phone! I can't use the htc charger my car charger and any other micro usb cable to charge or connect to a PC.
Today i sent my DS back and waiting for an answer this week.
Also waiting for an explain on the red notification light leaking on the top side of the phone.
This is really wire, and I haven't seen anything like this. Connected to PC with USB cable, DS should jump out some alert to select how to connect your mobile.
If the HW fails, Android has no means of knowing you're attemting to connect anything to the system...this is most likely a HW problem, so sending it back for repair/replacement was the right thing to do

usb connection with pc suddenly dead

Hello suddenly my nexus s stopped connecting with data with the pc it only charges, tried with 3 diffrent computers with diffrent os , no menu popping on nexus and nothing connected on the computer(like i didnt connect anything), i removed the battery left it for some time installed stock rom still nothing.It was acting normally for a second and the other it stopped any help appreciated!
Are you sure you're using the cable that came with the phone? I have an LG Wink featurephone here that uses the same connector at the phone end -- its cable will charge my Nexus S (using the computer, obviously, but also when used with either the LG or Samsung charger) but no USB connection happens when I use it. Only the cable that came with my Nexus S provides a USB connection when I connect to the computer. I guess there are pinout differences between the two cables.
If you're sure you're using the right cable, I would guess that it's gone bad if it doesn't work on any computer. You can buy an (overpriced) replacement from Samsung or maybe a cheaper one on eBay or at a retail store. If the latter, be sure the seller lists it as compatible with the Nexus S.
it happened with the original cable ppfff i dont know...
same problem
stavros86 said:
Hello suddenly my nexus s stopped connecting with data with the pc it only charges, tried with 3 diffrent computers with diffrent os , no menu popping on nexus and nothing connected on the computer(like i didnt connect anything), i removed the battery left it for some time installed stock rom still nothing.It was acting normally for a second and the other it stopped any help appreciated!
Click to expand...
Click to collapse
Hi
I have the same problem
I have no idea what the problem could be.
We are not alone with this problem: code.google.com/p/android/issues/detail?id=13553
Now installed stock rom as well but still the same problem.
If i starting the NS in the bootloader mode the phone is not recognized by the computer.
It would be great, if someone knows a solution!
polandy said:
Hi
I have the same problem
I have no idea what the problem could be.
We are not alone with this problem: code.google.com/p/android/issues/detail?id=13553
Now installed stock rom as well but still the same problem.
If i starting the NS in the bootloader mode the phone is not recognized by the computer.
It would be great, if someone knows a solution!
Click to expand...
Click to collapse
I've been trying to get help with this for weeks. No one is even responding to my posts. I thought it was something OBSURDLY simple, such that people didn't even want to waste their time responding to me.
Seeing same problem, No connetion via USB
Posted problem in General,, http://forum.xda-developers.com/showthread.php?t=1104245
Tried different cords, different computers and operating systems,, did cold start several times on phone (removed battery) still no luck, I am running totally stock
Curious do any of you have the Google Music Beta?? (maybe a over zealous rights thing?)
just tried it with a Win 7 machine that had never seen it before and it said it could not recognize the device,, me thinks that the MS device driver DB is messed up buy some recent Win update??
i sent it to samsung to change my usb slot because after connecting to pc and nothing happen when i went to charge the phone it took 5 hours to get to 30% so iam almost sure that mini usb slot malfunctions
stavros86 said:
i sent it to samsung to change my usb slot because after connecting to pc and nothing happen when i went to charge the phone it took 5 hours to get to 30% so iam almost sure that mini usb slot malfunctions
Click to expand...
Click to collapse
My phone charges just fine. And my USB connectivity was fine until I manually installed 2.3.4.
~I had usb connection problems after upgrade to 2.3.4 a bit different but I managed to get the USB back by formatting the SD card.
see here
Acnescar said:
~I had usb connection problems after upgrade to 2.3.4 a bit different but I managed to get the USB back by formatting the SD card.
see here
Click to expand...
Click to collapse
I was on 2.3.3 when this happened, i tried to flash 2.3.4 then and again it didnt work but the strange thing is that when i was moving the mini usb the first times up and down it was shown for a moment as a broken usb device.Then this stopped and was not shown at all on the computer and finally the phone charged super slow when connected to electricity
Beginning to believe that it is a physical prob with USB connector on phone. It seems to start/stop charging when wiggling usb on phone but no mounting. Doe anyone know best way to resolve , T-mobile but bought from Best Buy? so to Best Buy? FOR SUPPORT /EXCHANGE? suggestions?
I've seen loose connections before. My suggestion ain't the cheapest but the plug, on the cable end, shouldn't wiggle. I went to a corporate sprint store, the ones that actually have working display phones, and got their usb to micro usb data cable. The thing with that cable is when you plug it in the phone side, it goes into the jack firmly. You can almost feel the little locking tabs click into place. There should be no play or wiggle with that cable as long as there's no damage or abuse with the jack on the phone. IMO, that's a good data cable. It's never given me problems before.
Also, sometimes the cable is only wired for charging. A true data cable will be wired correctly and be able to both charge and transfer data. Usually the cables that come with the phone are crap quality. I don't know if my suggestion will help but it won't hurt to have a good cable for data transfer and flashing. The last thing you want is a flaky connection from a cheap cable when you're flashing roms. Russian roulette with bricking a phone in a worse case situation.
Did you try reboot the computer and the phone? How about a different usb port? How about unplug any other usb device in case it's conflicting for some unknown reason? It sounds like so many people with windows 7 are having problems. Usually always happens with a new os that's released. Xp, for flashing devices and programming different hardware devices, has never given of a problem. I have a small partition with xp on it just for that purpose only.
off to Samsung for repair for me...
After time on phone with them and a factory reset belief is that the usb connector is defective. BTW Best Buy just hands off to Samsung 1-800 #
So Back to a barely functional G-1 for a while, glad I could find it!
So is Samsung or the carriers replacing or fixing units?
My USB data died shortly after 2.3.4 ota update.
Wifi FTP is fine for data transfer but I want USB debug to work...
Shame on google and Samsung, this bug has been around for months.
no shame on anyone...
I went through a factory reset with Samsung on phone that isolated the problem to what is apparently a loose usb connector, nothing to do with software... only hassle is sending it in for repair, as` mentioned problem needs to be dealt with Samsung customer service (not carrier or Best Buy), they were fine on phone...

Help figuring out what's broken with my OnePlus One

Hello everyone,
A couple of weeks ago my USB data connection on my OnePlus One has stopped working.
This means that no connection is even detected on any computer.
This is not a driver issue as the computer doesn't even notice anything has plugged in.
I think it's not a software/ROM issue because the same applies to fastboot mode and recovery mode - no data connection, no "usb plugged in" sound on any computer, no device showing up.
It's also not a cable issue, as the same cable works on other OnePlus One's and I've tried many different known-to-be-working cables.
More facts:
1) When plugging to a computer USB port - the battery icon shows the charging (lightning) symbol for a half a second and disappears and it won't charge. The computer, of course, doesn't see a usb device plugged.
2) When connecting to an AC charger - it charges just fine.
3) I already tried replacing the dock connector and flat cable unit with a new one - did not solve the issue, which means the dock connector is fine.
Any insight on this will be greatly appreciated!
Thanks!
purpleman2k said:
Hello everyone,
A couple of weeks ago my USB data connection on my OnePlus One has stopped working.
This means that no connection is even detected on any computer.
This is not a driver issue as the computer doesn't even notice anything has plugged in.
I think it's not a software/ROM issue because the same applies to fastboot mode and recovery mode - no data connection, no "usb plugged in" sound on any computer, no device showing up.
It's also not a cable issue, as the same cable works on other OnePlus One's and I've tried many different known-to-be-working cables.
More facts:
1) When plugging to a computer USB port - the battery icon shows the charging (lightning) symbol for a half a second and disappears and it won't charge. The computer, of course, doesn't see a usb device plugged.
2) When connecting to an AC charger - it charges just fine.
3) I already tried replacing the dock connector and flat cable unit with a new one - did not solve the issue, which means the dock connector is fine.
Any insight on this will be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
By dock connector, you mean the USB port? Typically, this issue arises when the pins in the USB port get damaged. I don't know how the rest works out, but if that particular section of pins have to communicate throughout the rest of the motherboard, perhaps the trail responsible for that may have somehow gotten damaged. This is a clueless theory, someone with more electrical/motherboard experience can verify this.
What I do know is that once the micro USB port has been replaced on the phone, the issue should be fixed. It happened to an S3 I still have and I got it replaced by a friend. Sadly, it happened to me at the wrong time since i had wiped the entire OS and internal storage and was relying on my USB OTG cable and a flash drive which contained a rare rom called Sonic Open Kang Project (SOKP).
DO NOTE that this has also been an issue with me on the software side of certain devices. I uave had practically every flagship device out there and have come across a point where this happens on both stock and custom roms. My Optimus G did it on custom roms, and my Nexus 7 2012 occasionally on stock. There were other devices I cannot remember but sometimes factory resets or replacing the rom helps. However, you did state that the result is still the same on fastboot/recovery, so this seems to be more on the hardware side.
I replaced the USB connector (including it's flex cable) entirely. Did not solve the issue.
What else could be wrong?
try again
purpleman2k said:
I replaced the USB connector (including it's flex cable) entirely. Did not solve the issue.
What else could be wrong?
Click to expand...
Click to collapse
Try another computer. See if you can get any response from adb.
pbergonzi said:
Try another computer. See if you can get any response from adb.
Click to expand...
Click to collapse
I tried a lot of different computers and cables. None of them detect a USB connection.
Again, to clarify - they don't even SEE a usb device has been plugged in.
recovery?
purpleman2k said:
I tried a lot of different computers and cables. None of them detect a USB connection.
Again, to clarify - they don't even SEE a usb device has been plugged in.
Click to expand...
Click to collapse
You running a custom recovery? If so, see if you can toggle the mtp on/off reboot with each back to recovery. Use the tools to check the filesystem, permissions, etc.
Could pins have damaged?
Well, I did replace the USB connector with a new one, so if pins are damaged it's gotta be on the motherboard side, and I can think of no reason why that would ever happen.
As for recovery, I'm running TWRP and I'm not sure I understand what you meant I should try. Can you elaborate?
Thanks

Defective USB Port? Data connection and Quick Charge not working anymore

Hello,
I recently flashed TWRP and CyanogenMod 13 on my Mi4. It was working quite well, I had some problems with the rotation sensor and some bugs in the software, but Quick Charge and also the Connection to the PC worked without problems.
Today when I was on my way home I was charging my Mi4 with a Qalcomm 2.0 Quick Charge Powerbank from Aukey (i have used it in the past on other phones, always worked great), but it seems that the USB cable was broken, it was charging very slowly and it also seemed to have a defective contact (the cable charged if i moved it around a bit, but in certain positions it wouldn't charge).
However, when i got home and plugged it in, I noticed that the phone also charged very slowly with the charger, so I thought that I would just flash MIUI back on the device to fix it, maybe it was a problem with Cyanogenmod. But that didn't work at all, the phone couldn't connect to the pc.
So, here's my problem: The PC can't detect the phone and it also seems, that the phone doesn't recognize, that its connected to a pc. Charging via the USB ist still working, but very slow. Also Quick Charging isn't working, it doesn't matter which charger or cable I use, it's always slow. When I connect the phone to the charger or the PC it takes like 5 seconds to recognize, that a cable is connected, then it starts (slow) charging.
The phone doesn't show up in the windows device manager at all (there are no unkown devices shown, the pc just doesn't react when you connect the phone). Also there is no message on the phone when you connect it (usually you can choose if you want the use your phone as a usb drive or just charge it). I also tried to activate MTP in the developer settings on the phone and turning USB Debugging On/Off, but it didn't help.
I managed to download a MIUI Rom from xiaomi.eu with the phone and installed it with TWRP, but it didn't help. So I think I actually broke the USB Port of my phone with a defective Micro USB Cable. The phone can still charge (very very slowly, no quick charge possible), but I can't connect it to the PC anymore. The pc also won't detect the phone when it's in fastboot mode.
I tried to look it up on the internet, but all I found were people with driver problems, and I don't think that I have a driver problem, because it seems like there is no connection between PC and Phone besides the charging.
Anyone knows something about this? Is it even possible to just break the data connection and the quick charging with a defective cable?
Hey, did you get your Mi working? I have a similar experience with mine.
Same Problem
hey i got the same problem did you find any solution ?
redstainedfriday said:
Hey, did you get your Mi working? I have a similar experience with mine.
Click to expand...
Click to collapse
Garling said:
hey i got the same problem did you find any solution ?
Click to expand...
Click to collapse
No, I didn't find a solution for the problem. Phone is still not working, I even ordered a new charging port, but I made a mistake and ordered one for the LTE version. I have the 3g version, so the new charging port didn't even work with my phone. I don't want to spend any more money on it, so I just gave up on fixing it.
Same problem, and I am also stucked in recovery for now, never will buy phone without SdCard now...
Somobody found solution?

Px5 USB not working

hi, I sent the radio for a warranty because the touch screen did not work. They sent me a new radio, this time the USB is not working from the beginning, I tried a few pendrives, a wireless keyboard, charging the phone, nothing works. I checked with a multimeter and it shows 2.26V on the radio and the same at the end of the USB cable (so the cable itself is good, I also checked the cable and it's okay) anyone can knows where is the problem?
I d send it back, the only accounts I ve read about usb not working have when the SoM has been recovered a la @marchnz's method and someone has been heavy handed inserting pins into the SoM.
I've had several issues with USB on these as well. If someone tries to charge their device off the port, it tends to blow out components instead of signaling a brownout and shutting off the port.
I've used the pins metod to upgrade my SOM to Orero and my USB stop working. I've fixed my SOM with a thiny piece of alluminium inserted in the pins i've used for the upgrade.

Categories

Resources