I've found the nk.nbf file with new rom. How can I flash my S100 with this new rom?
link for it http://msk.ru.getfile.biz/free/u4cd276a788e33a294607906d0a850bc8/MS Windows Mobile v5.0.exe
Are you stupid? Haven't you read the top sticky thread "THERE IS NO WM5 FOR MAGICIAN"??
Related
I tried to upgrade my rom 1.11 to 1.12 in french on my Qtek S100 but I cant because an error of country id appears. so I tried to use rom editor but it asks for a pssword, and the most important is that when I use the file GetDeviceData.exe I find different order than that you have mentioned here in the file DeviceData.txt
anyone knows the solutions please !!!
I attached the file here
Thanks to compumad.
http://forum.xda-developers.com/viewtopic.php?t=36220
I upgraded my Qtek S100 to 1.13 and its going very well now.
... I cannot install it on my device due to CID lock.
I have cracked the protection of ACE HELLAS but I don't know how to install it on my device. I tried to upgrade using aWizard, but the device won't boot.
What I have now is an .nba file with the patched ROM.
Please tell me how to install it on a CID locked phone so I can test it, and then I will post the ROM
Credits go to Marker who initially found out how to crack the Greek rom for the universal.
http://forum.xda-developers.com/viewtopic.php?t=46548
Follow the instructions and use the romupdateutility exe from above
gpx said:
http://forum.xda-developers.com/viewtopic.php?t=46548
Follow the instructions and use the romupdateutility exe from above
Click to expand...
Click to collapse
Thanks for your reply, but aku 2 roms only allow you to upgrade. In addition to this, I would have to find a way to convert an .nba file to .nbf .
I anyone has a Qtek device and wan'ts to try my file, don't hesidate to ask. I can upload my .nba on the ftp
Hiho,
I have a Swisscom branded QTEK S200 atm running Dopod, but actually I'd like to install this:
GER_RUU_Prophet_215742_2157131_023021_QTEK.exe
But I get the Vendor ID Error and I didnt find a usefull way to trick it, should it be possible to install the ROM above?
Wheres the right Howto to remove that Vendor ID problem?
MY Qtek:
ROM: 2.15.13.27 WWE
ROM Date: 3/9/06
Radio: 02.19.21
Protocol: 4.1.23.09
ExtROM: 2.15.13.121
What is that with those G3 G4 chips, how do I find it out?
What else do you have to know to help me installing the ROM above?
How can I edit the registry, can I just connect with my regedit.exe on my computer to my qtek?
TIA!
Check the files on the ftp, i think there is a Update-Program that doesnt check the vendor ID.
And please upload the Rom
Edit:
http://forum.xda-developers.com/showthread.php?t=264509&highlight=vendor
http://forum.xda-developers.com/showthread.php?t=273114&highlight=vendor
Acutally I think I understand something wrong :-\
I want to upgrade my Qtek to the version I posted in that thread. But I get the error with the Vendor ID, mhh, ok.
The links u gave point to another ROM.
Erm, isnt that easy to understand...
Of course I'll upload as soon I get permission in the upload folder :\
As far as i understand the previous threads:
-Download the mentioned Rom with the NoVendorID Update Utility.
- then take your Rom you want to flash on your unit
- Proceed as described in the threads
Check www.phm.lu for a Registry editor on your device
You could upload to www.rapidshare.de ,then i would also try to upload to the ftp
Uploading it to radpidshare right now, will post link when done.
Mhh, so I downloaded that noVendor ID.
do I have to replace that nk.nbf? (extract it somehow from the exe installer I have?) or do I have to flash it twice?
1) with the noVendor rom
2) with my Qtek rom
sorry, i'm confused )
I would say (though i haven't done that before as i was also searching for the right rom) Unzip the novendorid rom and replace the .nbf file with the german qtek file.
At least worth a try
Mhh, there is the ROM:
http://rapidshare.de/files/34895878/GER_RUU_Prophet_215742_2157131_023021_QTEK.exe.html
Mhh, I'm wondering how to extract the .exe to get the *.nbf
Mhh....
If you have/want addme to msn: [email protected]
=)
Open the File with Winrar. You should be able to extract the files.
I do not use msn, sorry
BTW: Thank you for the ROM !
rom
ftp://xda:[email protected]_RUU_Prophet_215742_2157131_023021_QTEK.exe
the rom was already uploaded.
I know
It is the Rom Purp uploaded to rapidshare before.
well i decided today to Flash a ROM on my HTC Fuze and was following all the steps but then an Error message popped up when I was running the ROM which states
ERROR [296]: UGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.
what is a NBF file? how do i get a newer NBF file?how do i upgrade the NBF file I have now?
Thank you in advance..
Read here, http://forum.xda-developers.com/showthread.php?t=448008
I read through the majority of that thread and i did not see anything about a NBF file or this specific type of error
I thought you could only flash NBH files to a Fuze...have you tried one of those?
I am prtty much a newb to the HTC Fuze i just got it and decided to flash the RC4 Elite Project Rom and that error message popped up and i did hard Spl
Hello everyone,
I write because I have a little problem.
I have a Qtek 9100 (HTC Wizard) and installed the ITALIAN ROM IWT MAMELI, so I have windows mobile 6.1.
values are IPL 2.26 and SPL 2:26 so I have a G3 upgrade to version 6.x Windows Mobile.
now I want to install a clean version of Windows Mobile 6.5 (this version), unfortunately I found it only in English but I will try it. I always download and opening the rar archive, I found one file:
nk.nbf
Shocked
How do I update the ROM? What do I need? I tried to google a bit but I swear that I have not found anything. the only thing I understood is that the NBF file see language on the ROM of the phone and if doesn't correspond to the language of the ROM that I want, the upload stop.
now I have the Italian on the wizard, while I should put one in English! What should I do?
please help me .. I hope in your help!
specialdo said:
Hello everyone,
I write because I have a little problem.
I have a Qtek 9100 (HTC Wizard) and installed the ITALIAN ROM IWT MAMELI, so I have windows mobile 6.1.
values are IPL 2.26 and SPL 2:26 so I have a G3 upgrade to version 6.x Windows Mobile.
now I want to install a clean version of Windows Mobile 6.5 (this version), unfortunately I found it only in English but I will try it. I always download and opening the rar archive, I found one file:
nk.nbf
Shocked
How do I update the ROM? What do I need? I tried to google a bit but I swear that I have not found anything. the only thing I understood is that the NBF file see language on the ROM of the phone and if doesn't correspond to the language of the ROM that I want, the upload stop.
now I have the Italian on the wizard, while I should put one in English! What should I do?
please help me .. I hope in your help!
Click to expand...
Click to collapse
you can't use RUU MUN?
I don't know what is RUU MUN!!
When I upgraded to Windows Mobile 6.1, I used a rom with .exe format, so I installed everything with a double click..
download RUU from the attachments. Copy nk.nbf in the RUU 2.5.2 folder. After that run romupdateutility.exe
You should read more here http://wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
costyg said:
download RUU from the attachments. Copy nk.nbf in the RUU 2.5.2 folder. After that run romupdateutility.exe
You should read more here http://wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
Click to expand...
Click to collapse
Thanks a lot!!
I have already read the wiki but it doesn't speak how to install rom having NBF file. I followed the wiki when I installed Windows Mobile 6.1.
Now I know that I can install the 6.5 because I have IPL and SPL 2.26.
But if I have an italian ROM with Italian language and NBF file contains an English rom, I can upload the new rom? or freeze?
thanks.
It shouldn't matter what language you had. The new rom language will replace the old one.
perfect! i'll try later, when i'll be at home thanks a lot!
you're welcome