You will find the ROM here...:
http://www.clubimate.com/Support/ma_cdlsku2_arb_10300_141_10100_ship.exe
Note: ExtROM with Arabizer...
Best regards,,,
nice work thanx alot
ehh
is this a full rom? can i install it on my t-mobile ? and would it completly update my mda compact?
:shock:
Can some body get the password for the ROM files...
Hmmm…. Had no success yet getting out password to open Ms.nbf. But I found that we can upgrade Radio.nbf. So extract jam ROM to a folder delete Ms.nbf and NK.nbf and start Himaupdate.exe . The process of radio upgrade will appear. Anyway I installed the jam rom thru SD earlier. So finally I have radio updated. Lets wait until the password unlock, than it will be like before!
Nick-II said:
Hmmm…. Had no success yet getting out password to open Ms.nbf. But I found that we can upgrade Radio.nbf. So extract jam ROM to a folder delete Ms.nbf and NK.nbf and start Himaupdate.exe . The process of radio upgrade will appear. Anyway I installed the jam rom thru SD earlier. So finally I have radio updated. Lets wait until the password unlock, than it will be like before!
Click to expand...
Click to collapse
How did you update the MDA compact to a I-mate ? Witch ROM file ?
Cheers.....
Pinooo, I made it with jam.nb1 file that you can find on this site it was in forum Mda Compact from German to English. So there is all needed for update of MS and extended ROM and radio you will get from Official ROM see above how to do it.
how to use it ?
i always tried to flash my rom using the new upgrade tool - when using old header and old tool, upgrade works perfectly.
You just have to edit the change.bat for your own demands. At the state you download it, it is configured to change header into T-Mobile WWE version.
click here
Code:
run change.bat first, then MaUpgradeUt.exe
André
I have the dutch T-mobile MDA Compact.
Will this patch work on it?
And with the upgrade do i get Swedish dialpad/keyboard?
Want to keep everything english if possible.
should work; guess you dont even have to edit the change.bat before excecuting.
you'll get a qtek dialer (which is only slightly different from the windows original since it uses a (nice looking) skin - the dialer itself is the same as the original)
if you dont want to have this stuff install you can skip installation via reset and install the things you wish manually.
André
Well the skin is no problem, i choose my own skins after instal.
But what worries me is that T9 is swedish after this upgrade?
Swedish words are useless for me, i want them english.
quappo said:
i always tried to flash my rom using the new upgrade tool - when using old header and old tool, upgrade works perfectly.
You just have to edit the change.bat for your own demands. At the state you download it, it is configured to change header into T-Mobile WWE version.
click here
Code:
run change.bat first, then MaUpgradeUt.exe
André
Click to expand...
Click to collapse
Did you tried it by yourself? Your change.bat is not complete, you forgot to convert nbf to nba. That's why change.bat do nothing.
Then, as I already wrote several days ago - I did the same what you are suggesting - old tool with new files. It crashed my device totally, I cannot do anything to repair. So, be careful
Thanks!!!!
I have edited change.bat with imate operator (CDL_404) and flashed successfully!!!! Work perfectly!
Thank you again!
@landau:
of course i tried it by myself. you may have noticed that the nba-files are already in the archive so they dont need to be decoded from any nbf files (actually that was the problem: xda3nbftool cant decrypt these new format nbf-files).
so just run change.bat and flash it!
@justifier:
t9 offers several languages, english, french, german, ... unfortunately no dutch. if you want dutch, just take the t9.cab out of your own ext rom and install it manually. after the upgrade you wont find any swedish things on your mda luckily.
quappo said:
@landau:
of course i tried it by myself. you may have noticed that the nba-files are already in the archive so they dont need to be decoded from any nbf files (actually that was the problem: xda3nbftool cant decrypt these new format nbf-files).
so just run change.bat and flash it!
Click to expand...
Click to collapse
Sorry, I downloaded rar archive from ftp://xda-developers.com/Magician/qtek_106_upgrade/ but there4 only nbf files, not nba...
some ****ing idots have changed the archive! who the hell is doing that bloody ****??? :twisted:
i'll upload it again.
there should only be ms_.nba and nk.nba in the archive (besides the update prog)
quappo said:
some ****ing idots have changed the archive! who the hell is doing that bloody ****??? :twisted:
i'll upload it again.
there should only be ms_.nba and nk.nba in the archive (besides the update prog)
Click to expand...
Click to collapse
no wonder I've got Country ID error....,
can you tell us after you have upload the actual rar files.. ??
Thanks in advance
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
archive is up now.
if new problems occur, please post here. we would have to secure the archive via password then :-(
arfster said:
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
Click to expand...
Click to collapse
good to hear that it worked for you
thanks for your instructions!
arfster said:
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
Click to expand...
Click to collapse
If i copy getdevicedata.exe i cant run it?
In the devicedata.txt i only see pm10a , nothing more.
Am i doing wrong something?
edit*** Ok should fitrst copy it to desktop and open with wordpad, can see the codes now ***
When i run change.bat i get 2 warnings about the nbf headers, Warning possibly wrong password bla bla .
Is this normal, or is something wrong?
Goes about ms.nba ms.nbf and nk.nba nk.nbf
quappo said:
arfster said:
Thanks quappo, it worked perfectly.
By the way, the UK version of the T-mob MDA Compact has id T-MOB005, not T-MOB101, so you have to alter that in change.bat to get it to work. For others here who're as clueless as me: to find your operator ID, all you have to do is:
1) copy getdevicedata.exe to your Magician and run it
2) look at \windows\devicedata.txt, it starts with something like: PM10A 0 A WWE E T-MOB005. Whatever you have instead of the T-MOB005 is your operator code, stick that in change.bat instead.
3) run change.bat
4) run the update!
Click to expand...
Click to collapse
good to hear that it worked for you
thanks for your instructions!
Click to expand...
Click to collapse
thanks for the instruction..., and thanks for quappo for the nba files...
you really did it man...., I have upgraded from O2 1.03 to 1.06 without any error..., many thanks...
still wonder how genius you are....
@justifire
warning is ok, proceed with flashing
[quote="JustifireWhen i run change.bat i get 2 warnings about the nbf headers, Warning possibly wrong password bla bla .
Is this normal, or is something wrong?
Goes about ms.nba ms.nbf and nk.nba nk.nbf[/quote]
Yes, that seems to be normal, I got it and it worked fine.
i've got an imate jam with wwe rom,but the txt file from getdevicedata shows only pm10a and wwe, no operator id. Does anybody knows what i have to write for operator id code?
pntzamaras said:
i've got an imate jam with wwe rom,but the txt file from getdevicedata shows only pm10a and wwe, no operator id. Does anybody knows what i have to write for operator id code?
Click to expand...
Click to collapse
See my above post.
U copy getdevicedata.exe to magician, doesn't mather wich map.
Click on this file with stylus.
Now browse to /windows/devicedata.txt ON YOUR DESKTOP PC and copy it to your DESKTOP.
Now you can open it with word or notepad and you will see that the code is much longer than what you see on your magician.
You gotta browse to the right in notepad to see the rest.
Good luck.
I've also did the AKU2 update by Orange for my Dutch SPV C600. Like other peoples here I'm not able to use any Registry editor to modify the certification check. I tried all the online services but none of them seem to work with this ROM.
So I decided to try to flash my device with the Imate SP5 ROM. Because it's a different operator I had to change the NBF file. Never had any problems flashing my SPV C500 this way, but somehow this device haunts me Unfortunatly I wasn't able to get the NBF file correctly after altering the right fields. After changing the operating field, recalclating the header and saving the NBF file again, the file was only a view KB!
Maybe there is somebody who can help me out here.. ..I'm looking for a solution. Maybe somebody can get me a modified NBF file for flashing a Dutch Orange SPV C600.
I'm getting desperate here
I have the same problem so also the same request.
Solved it on an other forum!! 8)
Check THIS out!
Solved it with perfect help!
Thanks again. :!:
No problem at all Kliko! Glad I could help
Hiho,
I have a Swisscom branded QTEK S200 atm running Dopod, but actually I'd like to install this:
GER_RUU_Prophet_215742_2157131_023021_QTEK.exe
But I get the Vendor ID Error and I didnt find a usefull way to trick it, should it be possible to install the ROM above?
Wheres the right Howto to remove that Vendor ID problem?
MY Qtek:
ROM: 2.15.13.27 WWE
ROM Date: 3/9/06
Radio: 02.19.21
Protocol: 4.1.23.09
ExtROM: 2.15.13.121
What is that with those G3 G4 chips, how do I find it out?
What else do you have to know to help me installing the ROM above?
How can I edit the registry, can I just connect with my regedit.exe on my computer to my qtek?
TIA!
Check the files on the ftp, i think there is a Update-Program that doesnt check the vendor ID.
And please upload the Rom
Edit:
http://forum.xda-developers.com/showthread.php?t=264509&highlight=vendor
http://forum.xda-developers.com/showthread.php?t=273114&highlight=vendor
Acutally I think I understand something wrong :-\
I want to upgrade my Qtek to the version I posted in that thread. But I get the error with the Vendor ID, mhh, ok.
The links u gave point to another ROM.
Erm, isnt that easy to understand...
Of course I'll upload as soon I get permission in the upload folder :\
As far as i understand the previous threads:
-Download the mentioned Rom with the NoVendorID Update Utility.
- then take your Rom you want to flash on your unit
- Proceed as described in the threads
Check www.phm.lu for a Registry editor on your device
You could upload to www.rapidshare.de ,then i would also try to upload to the ftp
Uploading it to radpidshare right now, will post link when done.
Mhh, so I downloaded that noVendor ID.
do I have to replace that nk.nbf? (extract it somehow from the exe installer I have?) or do I have to flash it twice?
1) with the noVendor rom
2) with my Qtek rom
sorry, i'm confused )
I would say (though i haven't done that before as i was also searching for the right rom) Unzip the novendorid rom and replace the .nbf file with the german qtek file.
At least worth a try
Mhh, there is the ROM:
http://rapidshare.de/files/34895878/GER_RUU_Prophet_215742_2157131_023021_QTEK.exe.html
Mhh, I'm wondering how to extract the .exe to get the *.nbf
Mhh....
If you have/want addme to msn: [email protected]
=)
Open the File with Winrar. You should be able to extract the files.
I do not use msn, sorry
BTW: Thank you for the ROM !
rom
ftp://xda:[email protected]_RUU_Prophet_215742_2157131_023021_QTEK.exe
the rom was already uploaded.
I know
It is the Rom Purp uploaded to rapidshare before.
Hello everyone,
I write because I have a little problem.
I have a Qtek 9100 (HTC Wizard) and installed the ITALIAN ROM IWT MAMELI, so I have windows mobile 6.1.
values are IPL 2.26 and SPL 2:26 so I have a G3 upgrade to version 6.x Windows Mobile.
now I want to install a clean version of Windows Mobile 6.5 (this version), unfortunately I found it only in English but I will try it. I always download and opening the rar archive, I found one file:
nk.nbf
Shocked
How do I update the ROM? What do I need? I tried to google a bit but I swear that I have not found anything. the only thing I understood is that the NBF file see language on the ROM of the phone and if doesn't correspond to the language of the ROM that I want, the upload stop.
now I have the Italian on the wizard, while I should put one in English! What should I do?
please help me .. I hope in your help!
specialdo said:
Hello everyone,
I write because I have a little problem.
I have a Qtek 9100 (HTC Wizard) and installed the ITALIAN ROM IWT MAMELI, so I have windows mobile 6.1.
values are IPL 2.26 and SPL 2:26 so I have a G3 upgrade to version 6.x Windows Mobile.
now I want to install a clean version of Windows Mobile 6.5 (this version), unfortunately I found it only in English but I will try it. I always download and opening the rar archive, I found one file:
nk.nbf
Shocked
How do I update the ROM? What do I need? I tried to google a bit but I swear that I have not found anything. the only thing I understood is that the NBF file see language on the ROM of the phone and if doesn't correspond to the language of the ROM that I want, the upload stop.
now I have the Italian on the wizard, while I should put one in English! What should I do?
please help me .. I hope in your help!
Click to expand...
Click to collapse
you can't use RUU MUN?
I don't know what is RUU MUN!!
When I upgraded to Windows Mobile 6.1, I used a rom with .exe format, so I installed everything with a double click..
download RUU from the attachments. Copy nk.nbf in the RUU 2.5.2 folder. After that run romupdateutility.exe
You should read more here http://wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
costyg said:
download RUU from the attachments. Copy nk.nbf in the RUU 2.5.2 folder. After that run romupdateutility.exe
You should read more here http://wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
Click to expand...
Click to collapse
Thanks a lot!!
I have already read the wiki but it doesn't speak how to install rom having NBF file. I followed the wiki when I installed Windows Mobile 6.1.
Now I know that I can install the 6.5 because I have IPL and SPL 2.26.
But if I have an italian ROM with Italian language and NBF file contains an English rom, I can upload the new rom? or freeze?
thanks.
It shouldn't matter what language you had. The new rom language will replace the old one.
perfect! i'll try later, when i'll be at home thanks a lot!
you're welcome