I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
hello,
I have few connections on my S200, (few apn's opened), one
for internet, one for email and one for corporate access. So,
I want that my activesync use email connection. Well,
how to tell Activesync to use email connection, not Internet
or corporate?? It always uses Internet...
thx
Any application or way to share computer internet connection to Windows Mobile 5 using USB cable?
Should happen automatically as long as ActiveSync is running and has established at least a Guest partnership. You may also want to check "This computer is connected to" in ActiveSync connection settings.
uzbek
i did ones worked fine via active sync but i could do it again message came up like i need to check my connection
Just disable the proxy in the Proxy Manager of the Programs screen.
Ok, here's the problem.
How to configure my connection, so when I connect my device to Windows Mobile Device Center it can connect to the internet. When I set the Internet Connection Sharing, my phone stops syncing, it's as if I haven't connected it, and it continues, until I remove the ICS. Bridge isn't working aswell. I need it, so I can download QuickGPS and Weather info.
right i think i know what you mean. You want to access the internet on ur device when it is synced yes?
DOnt use internet connection sharing on the device, that is if you want to use your device as a modem (so to speak) using the phone network as an internet connection for your computer.
What you need to do is in WMDC (active sync in my case as i have xp) settings, ensure that in the connection settings "this computer connects to the internet" is selected. You should then be able to get internet thru your computer on your device whilst still syncing.
Let me know how it goes as i dont have WMDC (i dont like vista.... yet)
I meant I used Internet Connection Sharing on my PC nework adapter, sharing with the "Mobile Device Network".
WMDC is configured as "This computer is connected to: The Internet", but it still doesn't connect.
it doesn't work for me too; WMDC is configured as "This computer is connected to: The Internet"
it's seems that i can't find the right settings. I sync to an exchange server 2007 from my company. My configurations are already set up and works fine with a minor issue that i wish to solve.
- When i am over wifi or EDGE my phone just sync perfectly. I have a VPN connection, and activesync has the internal IP of the Exchange server. So i had set up an exception on settings-connections-connections-advanced-exceptions with the IP of the internal server. That forces the device to login to the VPN when i manually start a sync from the device.
- When i am over the PC (USB), on my LAN, and Activesync form the PC has the "This computer is connected to:" "Automatic" or "The Internet", it doesn't sync because the device tries to login to the VPN, which is not possible from inside the LAN. I had to change the PC ActiveSync option to "Work Network" as you can see on the attach picture in order to let the device sync on both scenarios (USB and Wifi/Edge) which works perfect. So, what's the problem? That when i use "Work Network" while connected through USB, the device can sync to local exchange, but can't connect to the internet (for example to browse a page). So i have to change that PC Activesync option every time i want to sync or browse the web.
Can anyone suggest me any configuration that let me do all the things (sync through the VPN when i'm on Wifi/EDGE, sync from PC when i am on USB on the LAN, and browse the web when i am also on USB without having to manually change Activesyn PC Settings?
Thanks!!!