is it possible to browse internet with mi pc connection through active sync, i just can do it using cell connection. qtek 1010, wallaby, xda.
yes it's possible
if it's turn on in activesync
if your firewall let it
and if you havent picked my isp as your network when connected to activesync
i don´t get it at all
OK, PASS THROUGH IS ACTIVATED IN ACTIVE SYNC 3.8,
FIREWALL IS NOT ENABLED,
AS NETWORK ADAPTERS I HAVE:
ASYNCMAC1 NDISWAN
NE2000
PPTP1 NDISWAN
IN ALL OF THEM "USE SERVER-ASSIGNED IP ADDRESS"
DO I HAVE TO CHANGE ANYTHING HERE OR IN CONNECTIOS WHERE DEFAULT INTERNET SETTINGS IS CHOSEN AND GPRS PROVIDER INFO, SHOULD I SET NEW HERE?
REMEBER I HAVE PHONE POCKET PC 2002.
THANKS FOR YOUR HELP, I´VE BEEN A WHILE AROUND THIS.
Set the passthrough connection to "The Internet"
Worked for me.
settings->Connections->Connections->Advanced->Select Networks
it says
Programs that automatic... connect to the internet should connect using
and there is a dropdown box
Hi all,
I have an XDA IQ (HTC Tornado) device that on the whole I'm very happy with but it keeps throwing an annoying error message at me, every time I try to sync with my desktop PC.
Activesync is set up to synchronise with our corporate Exchange server, which we connect to via a private GPRS APN, which has no Internet connectivity. For my private POP3 email, I use O2's Mobile Web GPRS APN, which resolves to Internet. I've created a domain exception to ensure that whilst mobile, the correct connection is established, depending on whether I'm synchronising my private or corporate e-mail.
All is well here but when I connect to my windows PC to synchronise my other PIM data (Contacts, Calendar, Tasks & Favourites), my phone throws an error message at me, because I guess it's trying to sync to the Exchange server via my desktop PC and there is no connectivity.
The error reads: "Your Internet connection is not configured properly. Please verify your settings in Data Connections".
It makes no difference if I change my ActiveSync connection settings so that "This computer is connected to:" "Internet", "Work" or "Automatic" the error message always appears on my handset when I sync with my PC.
Can any of you think of any way around this please?
Is there any way of persuading ActiveSync not to sync with Exchange whilst connected to my PC or better still, to exclusively associate the Exchange sync with the private GPRS APN connection?
My guess is that anyone setting their device up to sync with Exchange via an internal WiFi network might be facing the same issue..
Any help you can provide would be much appreciated!
I've had issues like this before but usually a reboot of the computer and phone get it working again. Make sure you've installed the certificate for your webmail (if one is required) and that you can connect to the exchange server when you're not connected to the computer. You may also be having a problem on your internal network, try connecting to webmail from your desktop as well.
I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
Hi there,
I have a question about an annoying problem that I've only managed to find one (unanswered) question to on the web.
I have an HTC Touch HD (WM6.1) which I use to read email from my Hotmail account, amongst other things. The problem is that the messaging client ALWAYS tries to download my mail via 3G/GPRS even when there's a WiFi connection available. This occurs both when I initiate the send/receive using TouchFlo 3D or from within the mail client.
Connection manager is, as far as I'm aware, configured correctly, and PIE/Opera/weather will all happily use WiFi to connect to the internet, only using my data connection when WiFi isn't available.
The same results occur with connection manager configured in either of the following ways:
Internet Connection = "My ISP" settings with 3G modem connection
Work Connection = Default "My Work Network" settings
WiFi Access Point = Connects to Internet
Network Card = Connects to Internet
OR
Internet Connection = "My Work Network" with 3G modem connection and "This network connects to the internet" enabled
Work Connection = As Internet Connection
WiFi Access Point = Connects to Work
Network Card = Connects to Work
Interestingly, if I disable my data connection and enable WiFi I CAN send/receive mail over the WiFi connection, so it seems like the data connection is being used in preference to the WiFi one.
Is this a known issue or am I doing something wrong?!
Thanks,
Mike
What´s the version of your ROM?
Is the device labeld by Vodafone?
There is an option when setting up the email account in pocket outlook to select the preferred connection for the account. It is in one of the advanced options pages when setting up the account. Normally it is setup for THE INTERNET so your WiFi adapter should point to the same.
Now, I use a little Mortscript to switch-on the WiFi and immediately change my Network Selection to NO DATA, which is just an empty setting (no internet connection). This effectively shutdowns the GPRS / 3G connection and pocket outlook has to use the WiFi route.
Hi,
I have the problem that a 3rd Party application (Syclo Agentry Client) is trying to connect to a server but the GPRS connection via the ISP is not initiated.
Opening a page in Internet Explorer or using MSN Messenger triggers the GPRS connection automatically. As soon as the connection is running, the 3rd party application is also able to connect to its server.
I am wondering whether the initiation of a GPRS connection is something which has to be specifically supported by each application or whether I am missing anything else.
Thanks,
Christian