Hi all,
I tried to do the ampda bigstorage upgrade via SD and followed the instructions in the manual.
It all finished according to plan but now whenever i reset the phone all i c is the boot mode, nothing else.
Anyway i can get a ROM back on?
Cheers
Its ok now, backup up rom came to the rescue!
Related
I did big storage to my qtek s110 yesterday. It was just fine until I tried to upgrade the newest Radio 1.13. I followed the instruct very carefully, however after successfully flashed the Radio, and I restart my s110. It didn't find the Radio!!!!! Then, I tried to flash back my old Rom, but the screen shows "sections = 1! upgrade not allowed". Now, I cannot use it anymore, and I cannot flash back to the old rom.
What can I do to save my baby????
Please help me. thanks.
..
Thank you for your reply!
I flashed my s110 with a shipped UK i-mate rom. It works fine. But I tried to reflash it to the orignal rom using sd card however the "press power button to flash" messege never comes out. What can I do to get back the orignal rom?
Thanks in advance.
Hi,
I've searched for a solution to my problem but having no luck.
I have a UK SPV M5000, I uploaded the PDAVIET WM6 ROM, for testing, I want to install another rom, but everytime the RUU runs it goes into recovery mode,and fails even after a hard reset etc.
The Uni boots and starts fine, but I need to flash another rom, I have even tried going back to the offical WM5 rom with no luck.
Can someone please advise how to get around the RUU error?.
Flashing from XP, Uni full battery etc, I've done a few prevous devices with no problem.
Thanks
STI555
First, put your Universal in bootloader before flashing.
Second, use MaUpgradeUt_NoID.exe RUU to flash.
Good luck
Thanks worked a treat!
Cheers
STi555
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
Hello,
First my question :
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Then the context:
I'm a newbie and 2 days ago I've tried to upgrade my I-Mate K-Jam to WM6.1.
After having carrefully read several thread and in particular the thread "Wizard Windows Mobile 6 for newbies" i first start to unlock my G4 mobile with HardSpl. This was a great success so I moved on to the next step loading a WM6 ROM. I choose the WizFlo 6.1.1.4 (http://forum.xda-developers.com/showthread.php?t=435228) but this was not a success since my K-Jam was just looping on the splash page/alignment wizard and reboot. I really thought that I had turned my mobile into a brick but was still continuing to investigate and yesterday evening I've learned how to just start the bootloader by pressing the camera button while starting-up. Yepee, 2 a clock this morning, I succeed loading the vanilla version of the TNT rom : http://forum.xda-developers.com/showthread.php?t=388229. Super everything was working fine so I went to bed.
This morning, very proud of what I've done alone I just decided to move from the TNT vanilla version to the professional version. This was a mistake since then I was never able to restart my K-Jam. It just freeze on the TNT splash screen. I've tried to reload several other rom but the TNT splash screen remains and my mobile just continue to freeze.
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Thanks in advance for your help
YES!
In order to revert back to official rom,you'll first have to remove HardSPL,otherwise it'll Brick the phone.
Secondly, have you tried a Hard Reset,it might help the phone to start working.Is your battery fully charged ?
After getting the phone HardSPL,there's no reason for any wm6 roms like TNT to stuck up,it might be that the battery is weak or flat.
Get the battery fully charged,try a Hard Reset,otherwise reflash TNT.
Thanks for your answer, I'm not sure about the batterie status. Am i able to refill the battery in bootload mode. or does the official K-jam charger work in my mobile is not yet started.
Almost a week I'm working on my mobile but no sucess yet.
One more question, Is there any special restart or reboot to be performed once the rom load process is complete ?
I've tried to install Loverom or merlin rom but even if the splash page change I never go furher. I'm now considering on moving back to an official ROM. But since I didn't backed up mu rom before all of these update process I'm gone use a download one.
K-JAM_WWE_216901_2169101_020710_ship.exe. This official package install a ROM file and the RUU utility, but how can I check that the rom does not contain IPL nor SPL file.
Is there a way to check rom content before a load. I'm using hardspl and I've read that if I instal a ROM with IPL/SPL i will turn my device into brick.
May be I should also remove hardspl but how can I do this ?
Solved !!
I just notice a format error when hard reset.
Google it and find his thread
http://forum.xda-developers.com/showthread.php?t=428312&highlight=format+error&page=3
Fixed yepeeee.
thanks to all for your help.
Good that you solved it finally, Happy Flashing
Hey Guys,
First off this is a re-post, me old thread was closed, I am sorry for reopening but I am still having this issue. DaveShaw and smokestack76 had posted. Dave thank you for your reply but I have been through the noob flash guide and many many many other threads and it does not resolve my issue.
I'm not new to flashing and roms, I have flashed at least 100 times and have done some cooking. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed fine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
I have tried flashing spl from the sd and yes spl image was KAISIMG.nbh and KAISDIAG.nbh was on there as well. Card is formatted fat32. HardSPL would start, read the file and get stuck on loading.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever it is released, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
I have the stock 6.1 att rom up right now but I would like to resolve the issue.
__________________
finally finally got the patched version of 3.29 flashed. I will let you guys know how it goes from here. I am on a different computer at work.
Success!
I started from complete scratch and a fresh brain and was able to get everything going.
After I got the os back up i was able to start jumpspl and get it to connect via usb. Then only the force usb on 3.29 patch would work. After that repaired active sync and I was ready to go. Thanks smokestack79 for the late night help last night. I was out of it and frustrated. Seems like she's got a little more life in her after all.