Hi,
I've searched for a solution to my problem but having no luck.
I have a UK SPV M5000, I uploaded the PDAVIET WM6 ROM, for testing, I want to install another rom, but everytime the RUU runs it goes into recovery mode,and fails even after a hard reset etc.
The Uni boots and starts fine, but I need to flash another rom, I have even tried going back to the offical WM5 rom with no luck.
Can someone please advise how to get around the RUU error?.
Flashing from XP, Uni full battery etc, I've done a few prevous devices with no problem.
Thanks
STI555
First, put your Universal in bootloader before flashing.
Second, use MaUpgradeUt_NoID.exe RUU to flash.
Good luck
Thanks worked a treat!
Cheers
STi555
Related
OK, I admit it, I made a boo-boo...
I've got an Orange SPV M600 which shipped with WM5. I decided to flash the ROM with a cooked WM6 version (for the HTC Prophet) and although it successfully applied, I've had niggely problem after niggely problem and have had enough. Something's got to be up with the ROM itself as I've tried a hard reset, tried again but problems still occur.
I want to put the Orange OEM ROM back on it, factory reset it and start again. Does anyone know of where I can get this?
Worth a try Thanks in advance....
You should go to the xda wiki first and look but here is what you are looking for
ftp://xda:[email protected]/OrangeUK/Prophet_Orange_UK_ROM.zip
Hi,
i have O2 Exec,
flashed this version of WM6
Jwrightmcps Crossbow ROM Update 2.12.06 WWE
http://forum.xda-developers.com/showthread.php?t=343736
it works ok, but doesn't see my 8Gb SDHC card (actually i see only 3,8GB)
I tried to flash another roms, but my uni is not booting after install. Only this one (Jwrightmcps Crossbow ROM Update 2.12.06 WWE) is working. When i try to boot my phone O2 logo is displaying and thats it.
Question: is it enough to download and install new rom, or i need to install somethink else? I tried also to install 6.1 rom, but it doesnt boot my phone also.
If i need to install somethink else, can you add link also
Thanks for help.
I have one idea what i did wrong.
When i flashed new rom i started it ehat windows was launched (not from bootloader). Is it possible that this way i break my radio and after that my new rom won't start?
i looked wiki, but i didn't get answer
Thank you for not anwering
Still have same problem
Im going nutz here so please forgive me..
I've read the rom flashing guides, I've searched for a couple days, but I am STILL unable to flash Dutty's Latest 6.1 hybrid rom. Here's how I attempted it.
Flashed Hardspl v1.
Flashed many diff 6.0 and 6.1 roms & radios. All worked perfectly.
Attempted to flash Dutty's Hybrid 6.1, flash completes to 100% and resets.
I can see the splash screen and even go through the setup. It then freezes on the splash screen and the buttons and screen are unreposive.
Here's some things I've tried after searching here.
Flash a wm 6.1 compatible radio ( I flashed several)
No change. Still frozen after autosetup.
Flash to original AT&T rom for the tilt and reflash back to Dutty's. No change Still froze at boot on splash screen.
Flash all of Dutty's other roms. They are flashed succesfully and work fine.
So here I am...at your mercy. Why would this rom have problems with my Tilt when every other rom I've flashed work just fine?
Any Tips.
If anyone has ANYTHING that could help me I would be very apprectiative.
Thank You
Thrac
Try doing a Hard Reset then re-flashing your device.
HTH.
Thanks
Dave
Or try flashing using MicroSD Card - as described here: http://forum.xda-developers.com/showthread.php?t=336158
RE
Thank you both for your suggestions. I am however still unable to use this rom.
I performed a Hard Reset anad then reflash with both USB and MicroSD. It still freezes at the point right after screen calibration.
Can anyone shed some light here??
Thanks again
Thrac
Thracian said:
Thank you both for your suggestions. I am however still unable to use this rom.
I performed a Hard Reset anad then reflash with both USB and MicroSD. It still freezes at the point right after screen calibration.
Can anyone shed some light here??
Thanks again
Thrac
Click to expand...
Click to collapse
flash to a 6.1 rom you previously flashed that worked. then flash to his hybrid.
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
Hello,
First my question :
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Then the context:
I'm a newbie and 2 days ago I've tried to upgrade my I-Mate K-Jam to WM6.1.
After having carrefully read several thread and in particular the thread "Wizard Windows Mobile 6 for newbies" i first start to unlock my G4 mobile with HardSpl. This was a great success so I moved on to the next step loading a WM6 ROM. I choose the WizFlo 6.1.1.4 (http://forum.xda-developers.com/showthread.php?t=435228) but this was not a success since my K-Jam was just looping on the splash page/alignment wizard and reboot. I really thought that I had turned my mobile into a brick but was still continuing to investigate and yesterday evening I've learned how to just start the bootloader by pressing the camera button while starting-up. Yepee, 2 a clock this morning, I succeed loading the vanilla version of the TNT rom : http://forum.xda-developers.com/showthread.php?t=388229. Super everything was working fine so I went to bed.
This morning, very proud of what I've done alone I just decided to move from the TNT vanilla version to the professional version. This was a mistake since then I was never able to restart my K-Jam. It just freeze on the TNT splash screen. I've tried to reload several other rom but the TNT splash screen remains and my mobile just continue to freeze.
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Thanks in advance for your help
YES!
In order to revert back to official rom,you'll first have to remove HardSPL,otherwise it'll Brick the phone.
Secondly, have you tried a Hard Reset,it might help the phone to start working.Is your battery fully charged ?
After getting the phone HardSPL,there's no reason for any wm6 roms like TNT to stuck up,it might be that the battery is weak or flat.
Get the battery fully charged,try a Hard Reset,otherwise reflash TNT.
Thanks for your answer, I'm not sure about the batterie status. Am i able to refill the battery in bootload mode. or does the official K-jam charger work in my mobile is not yet started.
Almost a week I'm working on my mobile but no sucess yet.
One more question, Is there any special restart or reboot to be performed once the rom load process is complete ?
I've tried to install Loverom or merlin rom but even if the splash page change I never go furher. I'm now considering on moving back to an official ROM. But since I didn't backed up mu rom before all of these update process I'm gone use a download one.
K-JAM_WWE_216901_2169101_020710_ship.exe. This official package install a ROM file and the RUU utility, but how can I check that the rom does not contain IPL nor SPL file.
Is there a way to check rom content before a load. I'm using hardspl and I've read that if I instal a ROM with IPL/SPL i will turn my device into brick.
May be I should also remove hardspl but how can I do this ?
Solved !!
I just notice a format error when hard reset.
Google it and find his thread
http://forum.xda-developers.com/showthread.php?t=428312&highlight=format+error&page=3
Fixed yepeeee.
thanks to all for your help.
Good that you solved it finally, Happy Flashing