Related
excuse me if this is terribly obvious.....but.....I don't have this device because I want to utilize Hsdpa speeds (not just Utms)......
so is this now available for the 750....hack or otherwise.....and if not, could I commission some hearty chef to take it on?!
thanks
rockky said:
excuse me if this is terribly obvious.....but.....I don't have this device because I want to utilize Hsdpa speeds (not just Utms)......
so is this now available for the 750....hack or otherwise.....and if not, could I commission some hearty chef to take it on?!
thanks
Click to expand...
Click to collapse
do a search on this forum. there is a thread. i'd link you, but i'm too lazy.
rockky said:
excuse me if this is terribly obvious.....but.....I don't have this device because I want to utilize Hsdpa speeds (not just Utms)......
so is this now available for the 750....hack or otherwise.....and if not, could I commission some hearty chef to take it on?!
thanks
Click to expand...
Click to collapse
There has been a hack out for months for HSDPA. I get speeds here in NYC 700 - 900 and above at times.
Edit: oo3 is right, do a search next time.
ok.gonna search ' hsdpa hack for palm 750'
Didn't see it in the Wiki....but I'll check it again closer.
maevro said:
There has been a hack out for months for HSDPA. I get speeds here in NYC 700 - 900 and above at times.
Edit: oo3 is right, do a search next time.
Click to expand...
Click to collapse
Just a quick note on the HSDPA "hack" - it will indeed enable HSDPA data, but does not enable simultaneous data+voice capabilities like a true HSDPA implementation will.
=)
summiter said:
Just a quick note on the HSDPA "hack" - it will indeed enable HSDPA data, but does not enable simultaneous data+voice capabilities like a true HSDPA implementation will.
=)
Click to expand...
Click to collapse
Coulda fooled me.
I was driving (read: being a passenger) through Chicago talking on my Treo 750 on my Bluetooth headset while I was browsing the web on the device itself.
Sure looked like simultaneous data+voice to me!
I concur with skuzz...
I've been talking on the phone when instant messages or email comes in... Nothing more distracting than the 3quick vibrates of Agile Messenger when an instant message comes in.
Highest speed I think I've gotten in like 939....
mG
UMTS is capapble of voice/data together regardless of whether or not you have HSDPA enabled.
The only users who won't see concurrent voice and data are those with Vodafone Treo 750vs.
Vodafones UK network doesn't support concurrent voice and HSDPA in the south yet, so Palm have disabled the feature. If you're roaming/using a diff rom ymmv.
Which is why diff folks see different things
Couple of questions/concerns:
1. HSDPA says it is running on MEdiaNet. I have a PDA Personal Unlimited Plan. Doesn't this conflict with what I'm paying for? And saying that they'll "never find out" isn't good for me. If I'm getting something other than what I pay for through questionable means I'd rather not do it. I don't mind tweaking, modding a phone that I purchased, but cheating AT&T is something else.
2. Is it possible that they one day discover that I'm runnning HSDPA and charge me for the extra data I've obtained?
tinpanalley said:
Couple of questions/concerns:
1. HSDPA says it is running on MEdiaNet. I have a PDA Personal Unlimited Plan. Doesn't this conflict with what I'm paying for? And saying that they'll "never find out" isn't good for me. If I'm getting something other than what I pay for through questionable means I'd rather not do it. I don't mind tweaking, modding a phone that I purchased, but cheating AT&T is something else.
2. Is it possible that they one day discover that I'm runnning HSDPA and charge me for the extra data I've obtained?
Click to expand...
Click to collapse
You will be fine. For some reason there is a registry entry that forces the phone to use 3G instead of HSDPA (aka 3.5G). The custom ROMs out here just enables HSDPA. ATT does provide this on all of their other phones and you wont get charge for this. Why the mode was locked out in the stock ATT ROM...I'm not too sure.
Ok, it's just that it seems too deliberate like they didn't want people getting more for less.
If you have an unlimited plan, as long as you are not trying to run bittorent, you should be fine.
I have thought about this myself, I almost think ATT is disabling HSDPA on purpose to meet the battery life they claim. I have seen no test on 3g vs HDPA and battery drainage, but I would assume opening more channels for data drains the battery quicker. The other possibility is the endless hammering of the network by iPhone 3Gs, so to prevent too much going on they are handicapping the devices. The far out possibility is ATT trying to make some devices look worse than other in the eyes of the consumer, in order to sell more of the more expensive phones (in this case the Bold being most expensive). But there is no actual proof to any of this, so I am just speculating. Its very much possible that HTC is just slow to update their branded ROMs, which is ALWAYS the case.
Actually from the many articles I have read, ATT is stretching the network thin. The mass amount of iphone users on 3g has put a strain on data usage. In order to buy some time to upgrade some network areas ATT had crippled newer phones. I will bet we will see a new ATT rom in the next quarter that has HSDPA enabled by default. If I get some spare time I will dig up the articles and link them to this thread.
wow lots of conspiracies here.
1 MEdia Net is the name of the portal that connects your phone to the internet. PDA net unlimited and MEdiaNet unlimited are the plans that you pay for to get unlimited access. So when the phone says it's connected to MEdia Net (3G) it's just stating it's connected to the gateway via 3G speeds, its not telling you which plan you are using.
2 - The 3G icons - not speeds were disabled to probably solve lots of customer calls. Lots of people don't know that H is faster than U and that U and H are BOTH 3G (3.5G is still a 3G technology) Here is one example:
Purchased a Sony Ericson Xperia X1 yesturday. This is my first WM phone as well as my first unlocked phone. I upgraded from a Cingular branded Moto Razr V3i
Today I go into the AT&T store to have Personal PDA added to my service. For whatever reason it wouldn't let me add it over the web site. The Plan is added and the customer rep tries to configure the phone for 3G as it was only connecting via Edge. After some fiddling we get a "H" for the data icon. Two hours ago I did not know "H" is equal to or better than "3G" ( Now I know) In a case in of not knowing when to stop he and I decided to use to the procedure for the ATT branded HTC Fuze in an effort to get 3G.
Click to expand...
Click to collapse
Continue reading...
So as you can see, if customers that are even semi tech are not satisfied with getting a "H" on their phone cuz they want "3G Speeds" can you imagine the 500 calls a day about why they aren't getting 3G on their phones and instead are getting H?
If you want to get technical, AT&T in most areas no longer runs a UMTS network and has upgraded to HSPA. Even the areas that are UMTS have HSDPA addon. So they could be advertising 3.5G but that would just confuse everyone and think their phones need to be upgraded somehow.
aruppenthal said:
Actually from the many articles I have read, ATT is stretching the network thin. The mass amount of iphone users on 3g has put a strain on data usage. In order to buy some time to upgrade some network areas ATT had crippled newer phones. I will bet we will see a new ATT rom in the next quarter that has HSDPA enabled by default. If I get some spare time I will dig up the articles and link them to this thread.
Click to expand...
Click to collapse
This is exactly whats going on, BUT the other major factor is that the iPhone is NOT capable of HSPA and only 3G. This means that they don't want the Fuze drawing any sales away from the iPhone. You will see another iPhone come out next year capable of HSPA after AT&T gets there HSPA software updates they are hyping up in 2009.
**There is another thread HERE that has a cab in it to fix this. You can also flash a new ROM. The cabs below came from this thread and credit goes to them. "advancednetwork" cab changes icons, "advancednoicons" keeps original icons.
No HSDPA only Edge
I have AT&T and got a new Unlocked Raphael (no not the Fuze) just a little while ago to upgrade from my old Tilt. I use to have a very fast HSDPA connection but now with my Raphael I can only get Edge network. I have of course done gone through the forums first and have the required HardSPL, I have also, flashed my own roms (tried several different ones) also tried different radios, the above settings cabs, as well as the different tutorials on the reg settings that need to be changed as well as of course using Advanced Config as well as gone into advanced networking and check the settings every time but still can't get HSDPA, and yes I did all the aforementioned with all the different roms I have tried as well as the different radios. I put my sim in my old Tilt and it works fine on HSDPA. If any1 can help will greatly appreciate.
Supposedly in the configuration files, HSDPA supported was disabled per request by AT&T... which is noted in via comments in the middle of the coding.
Newer roms have HSDPA unlocked so we're able to obtain faster data speeds.
phaze1 said:
I have AT&T and got a new Unlocked Raphael (no not the Fuze) just a little while ago to upgrade from my old Tilt. I use to have a very fast HSDPA connection but now with my Raphael I can only get Edge network. I have of course done gone through the forums first and have the required HardSPL, I have also, flashed my own roms (tried several different ones) also tried different radios, the above settings cabs, as well as the different tutorials on the reg settings that need to be changed as well as of course using Advanced Config as well as gone into advanced networking and check the settings every time but still can't get HSDPA, and yes I did all the aforementioned with all the different roms I have tried as well as the different radios. I put my sim in my old Tilt and it works fine on HSDPA. If any1 can help will greatly appreciate.
Click to expand...
Click to collapse
The HTC Touch Pro doesn't come with the correct amplifier that could be used on the ATT 3G network so there is a no-go for you on this. I am suffering the same thing but I am glad I am not paying for it at all.
Cheers,
juliuswang said:
The HTC Touch Pro doesn't come with the correct amplifier that could be used on the ATT 3G network so there is a no-go for you on this. I am suffering the same thing but I am glad I am not paying for it at all.
Cheers,
Click to expand...
Click to collapse
Thnx juluswang...That info should be in the wiki and/or a sticky and if it is I did not see it. Guess I will sell it but what model has both cameras and the ability to utilize 3G and HSDPA here in the States?
This isn't related to this thread, but I just downlaoded a 4.2MB cab file in literally 1.5 seconds tops. I clicked on the file and by the time Opera's download tab opened, the file was done with a green checkmark.
I am loving my HSDPA/HSUPA enabled ROM.
So, is there a cab that will activate HSDPA or give access to it on the Fuze?
Advanced Configurator will allow you to enable HSDPA and HSUPA on your Fuze w/o flashing to a new ROM, voiding your warranty and spending hours setting up your phone again (not that we don't all do that anyway).
Is there no registry edit that will do it? I've tried all the ROMs and don't like them.
tinpanalley said:
Is there no registry edit that will do it? I've tried all the ROMs and don't like them.
Click to expand...
Click to collapse
Yes there is. I don't know what they are but the Advanced Configurator will set them for you.
http://julien.schapman.free.fr/touchxperience/advanced-configuration-tool.php
I have always wondered this:
If I have a MediaMax unlimited package vs. PDA plan on my Fuze would that have any impact on speed? I get HSPDA connections here in Chicago uhbt I typically see 900k speeds, while I see others reporting 1.8. Am I capped because I use Media instead of PDA plan? I have on occasion reached 1.2 so I'm thinking no? 3G is spotty in Chicago. I work IN the ATT building and I get Edge. How lame is that.
something bout HSDPA and HSUPA on advanced config, i have no idea if this has been answered yet or not but is it good idea to activate it(disabled by default)?? and what differences will i see if i activate it? am i going to get charge for it(just wondering)? and i have a FUZE with the unlimited Personal PDA plan on AT&T, plz let me know...thnx
XERO_Racer said:
something bout HSDPA and HSUPA on advanced config, i have no idea if this has been answered yet or not but is it good idea to activate it(disabled by default)?? and what differences will i see if i activate it? am i going to get charge for it(just wondering)? and i have a FUZE with the unlimited Personal PDA plan on AT&T, plz let me know...thnx
Click to expand...
Click to collapse
what are you waiting for? Activate HSPA! ATT is dumb and disabled HSPA on our phones (no idea why though). But when you activate it, you should be able to get the fastest data speeds off the ATT network, and theoretically up to 7.1 Mbps download and like 2 or 3 upload speeds. You wont get charged extra for using it. I have hspa enabled on the $10 a month unlimited plan for nonpda's and it works great!
nhshah7 said:
what are you waiting for? Activate HSPA! ATT is dumb and disabled HSPA on our phones (no idea why though). But when you activate it, you should be able to get the fastest data speeds off the ATT network, and theoretically up to 7.1 Mbps download and like 2 or 3 upload speeds. You wont get charged extra for using it. I have hspa enabled on the $10 a month unlimited plan for nonpda's and it works great!
Click to expand...
Click to collapse
ight dude thnx but i have one more question i need to know, since 3G can give u the flexibility to go on the internet while on a phone call, will HSPA do the same thing?? cuz i love that feature, thnx
Yes, with the [H] displayed, you can do both. HSDPA is an extension of 3G.
http://en.wikipedia.org/wiki/HSDPA
XERO_Racer said:
ight dude thnx but i have one more question i need to know, since 3G can give u the flexibility to go on the internet while on a phone call, will HSPA do the same thing?? cuz i love that feature, thnx
Click to expand...
Click to collapse
I acticated this using advanced config. but I don't see an "H" popping up. I only see the 3g. I did do a speed test and noticed twice the speed back after I activated HSDPA. How do I get the "H" to pop up or is it even supposed to pop up.
I activated this using advanced config. but I don't see an "H" popping up. I only see the 3g. I did do a speed test and noticed twice the speed back after I activated HSDPA. How do I get the "H" to pop up or is it even supposed to pop up. I am getting speeds of 511kbit/sec. Although it doesn't really seem any faster.
Perhaps it isn't supported in your area? There is another cab file out there
that makes the setting that advanced config does "stick", because of something at&t did, when you reboot, it goes back to 3G only. Do a search for "fuze H fix". I'm on the laptop, and don't have the file.
yamilrx said:
I activated this using advanced config. but I don't see an "H" popping up. I only see the 3g. I did do a speed test and noticed twice the speed back after I activated HSDPA. How do I get the "H" to pop up or is it even supposed to pop up. I am getting speeds of 511kbit/sec. Although it doesn't really seem any faster.
Click to expand...
Click to collapse
there's another registry tweak you can do through advanced config or diamond tweak (might be the latter) that lets you determine whether or not it displays the H icon. Chances are that if you're on 3g, you're on HSPA. let me know if you can't find it and i'll dig it up for you
yamilrx said:
I activated this using advanced config. but I don't see an "H" popping up. I only see the 3g. I did do a speed test and noticed twice the speed back after I activated HSDPA. How do I get the "H" to pop up or is it even supposed to pop up. I am getting speeds of 511kbit/sec. Although it doesn't really seem any faster.
Click to expand...
Click to collapse
IIRC HSPA isn't available on T-mobile. Not sure of this however.
ok i havent seen a post for this so here we go..
if you use adw launcher and custom make an icon attached to the hidden menu apk you can access the test and servicing menus like other phones BUT... if you go into test settings for phone (play around its in there) there is a menu the shows hspda (3g, hspda+ being 4g) and many other functions that are advertised on the phone that are all listed as NOT IMPLIMENTED YET!!
so as far as i can tell 4g is NOT active on tmobile at all yet. not until the software is upgraded (gingerbread i am assuming). so it would make sense why the signal on the phone is screwed up and dropping (confused phone maybe?) and why im still getting 3g speeds (slightly faster maybe from better signal reception due to upgraded hardware from my previous Vibrant).
go take a look for yourself and let me know what you think. im sure you can use desktop visualizer to get to the menu to. DONT MESS WITH ANYTHING THOUGH. i had to reset my phone and not with a hard reset, but a recovery i found on a nvflash website. almost bricked it. so just look but don't touch anything important unless you know what your doing.
im looking forward to hearing what everything thinks of this and the giant list of other features also saying this in the same menu. because i feel mislead just a little bit.....
I think it's just that the functions in the hidden menu aren't implemented yet.
Hmmm, interesting find! Maybe this explains the problems I'm having maintaining a stable 2g only connection as well
Dolphinwigs said:
ok i havent seen a post for this so here we go..
Click to expand...
Click to collapse
There's a reason for that...
so as far as i can tell 4g is NOT active on tmobile at all yet. not until the software is upgraded (gingerbread i am assuming)
Click to expand...
Click to collapse
I've got a hot 4g connection where I am (west Texas), you don't get 4.9-5.6mb (Speedtest) download on 3g. Did you check the T-Mobile coverage map to see if you have it in your area yet?
Edit: you also may need a new sim card. Depending on the age of the card, you might not be able to get a stable lock on to 4g (age as in what generation it was produced.. not how long you've had it)
thats possible, but im getting 3g speeds still as far as i can tell and i don't see why it wouldnt be included in the "hidden menu" if it is working since we aren't "really" supposed to know about the hidden menu. anyways just something i noticed.
menu is Hidden Menu->modem settings is where the menu is at.
and i got a new sim card (tired 2 new ones both the same) and yes i am in salt lake city and it is a 4g area for tmobile. but seems like everyone (mostly) is getting signal drops all over the place. my 2g isn't working as consistantly as it did before on my vibrant either. im sure gingerbread will fix all of this though.
I'm getting 4-8mps down in Metro Atlanta. I say 4G speed is on.
jdkackley said:
Hmmm, interesting find! Maybe this explains the problems I'm having maintaining a stable 2g only connection as well
Click to expand...
Click to collapse
I'm having the same problem, and I've even got a 2G booster in my house. My 2G connection drops all the time on my G2X but not my Vibrant. When I look at the signal strength when it's up it's not much different than the Vibrant, -104dBm on the G2X vs -100 dBm on the Vibrant
Im at a consistent 6-9mb dl at my house with a 1mb+ ul. Im calling it 4g and have you tried your conn outside of your city to see if its just congestion on the network?
I'm also getting 4-8mbps speeds in Atlanta, 4g is definitely working.
I'm in vegas, every hour, I get only 10 or 20mn of 4g at 6Mb download speed, the rest of the time I'm on 2g. At night time,i get 4g most of the time. So I guess in the day time, they kick me back to 2g to save their bandwitch, I'm returning my phone to let them know this is not acceptable
Sent from my LG-P999 using XDA App
My phone SAYS 4G all the time in Charlotte NC but I have only been getting 1mb DL and about 1.5 upload. The weird thing is that browsing the web is lightening fast compared to the vibrant. I would say it loads pages twice as fast.
jrharvey said:
My phone SAYS 4G all the time in Charlotte NC but I have only been getting 1mb DL and about 1.5 upload. The weird thing is that browsing the web is lightening fast compared to the vibrant. I would say it loads pages twice as fast.
Click to expand...
Click to collapse
Not sure but this may have as much to do with the processor and RAM speed as the connection speed.
I get crap speeds compared to the Nexus S, and that phone doesn't support full hspa+
jlevy73 said:
I get crap speeds compared to the Nexus S, and that phone doesn't support full hspa+
Click to expand...
Click to collapse
I am not complaining about my speeds which are plenty good IMO, averaging around 3-3.5 mbps. However, I have been surprised that they are no better than my Nexus One was that also didn't support HSPA+.
A few things, before we get too heavy handed on the FUD:
The phone is technically '4G' compatible, and it supports it out of the box.
Most of T-Mo's towers have been upgraded to support their 4G (HSPA+)
Regular HSPA caps out at about 3.5Mbps down. I've gotten as much as 7Mbps down on my G2x
Personally, I haven't had many issues with signal, but I live in Houston, so that may have something to do with it.
4g is on in Huntington Beach, and irvine.
I did notice its not a huge difference speed wise though. I had the moto cliq 3g and i would get 1mbs ish to 5mbs DL, and with the G2x im averaging about 3mbs to 7mbs. not a huge difference but the big change is Latency. I used to rock 700ms to 1000ms on 3g with my cliq, im getting around 55ms to 150ms on my G2x.
Latency is key for me though, i would prefer lower latency than higher download speeds. Due to the fact I need to vpn and voip with company network.
I found that t mobiles 3g network is still very capable in speed. the main issue i had was my cliq was underpowered to handle the t mobiles network. when i would tether my rooted nook color it would perform like a champ.
jimbo831 said:
I am not complaining about my speeds which are plenty good IMO, averaging around 3-3.5 mbps. However, I have been surprised that they are no better than my Nexus One was that also didn't support HSPA+.
Click to expand...
Click to collapse
Where do you live? Is it possible T-Mo may not support HSPA+ in your area?
It's also important to note that even if the towers you're connected to support HSPA+, that's only one part of the process. They also have to upgrade the data connection to the tower itself (backhaul) to ensure it can handle the speeds. If you're connected to an HSPA+ tower that doesn't have the upgraded backhaul, that could explain slow speeds.
No.
HSPA+ ("4G") is on and working. You're just not in an HSPA+ area it seems.
We're all getting faster than HSPA speeds, so we are certainly on HSPA+. Speedtests are the best way for you to verify if you are on EDGE (2G), HSPA (3G), or HSPA+ (4G).
I would like a 3g icon just top know what type of tower I'm on, I think the baseband is wack, I bet when gingerbread comes out we will get the separate icons... Also my vibrant would get steady 5-6mb down 2mb up, but with this phone its anything but steady, I can get up to 8mb down but its crazy random, regular use is sometimes slow initializing, and someones websites timeout.... I think a baseband upgrade will fix all this stuff tho, or software upgrades.
Sent from my LG-P999 using XDA Premium App
pychobj2001 said:
I would like a 3g icon just top know what type of tower I'm on, I think the baseband is wack, I bet when gingerbread comes out we will get the separate icons... Also my vibrant would get steady 5-6mb down 2mb up, but with this phone its anything but steady, I can get up to 8mb down but its crazy random, regular use is sometimes slow initializing, and someones websites timeout.... I think a baseband upgrade will fix all this stuff tho, or software upgrades.
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
That's the thing though. The way T-Mo has their network setup, if you can get 3G from a tower, you should be able to get 4G. Period. You may not get 4G speeds, but you're technically connected to an HSPA+ tower, and thus the 4G icon. It'd be weird to connect a tower that supports HSPA at this point, but not HSPA+ (though I'm sure there are some out there)
I wish there was a fix for our infuse to get better data download and upload like this fix.
http://forum.xda-developers.com/showthread.php?t=584409
the above fix made a huge difference on my windows phone.
just a thought and please don't flame.
we alread have it! infact we have better! there is not speed fix because att included there best into this phone! if you see other phones download faster it is just differences in the modem.bin that are not well understood and they are more or less lucky, if you go to a different area you might find that opposite situation with the same two phones.
that is a mod to get hspa. hspa is more or less 3.5g or 3g+ as it is known on some over sees cariers. what we have is hspa+ which is what gives us the abilities to get 4g like speeds on the 3g network. if you look at the att 4g ads the small print say"4g speed brought to you by hspa+ with enhanced backhaul" the being a "4g" phone it has it enabled.
Be ready...
Dani897 said:
we alread have it! infact we have better! there is not speed fix because att included there best into this phone! if you see other phones download faster it is just differences in the modem.bin that are not well understood and they are more or less lucky, if you go to a different area you might find that opposite situation with the same two phones.
that is a mod to get hspa. hspa is more or less 3.5g or 3g+ as it is known on some over sees cariers. what we have is hspa+ which is what gives us the abilities to get 4g like speeds on the 3g network. if you look at the att 4g ads the small print say"4g speed brought to you by hspa+ with enhanced backhaul" the being a "4g" phone it has it enabled.
Click to expand...
Click to collapse
Actually, when I browse the internet, I compare the infuse and my tilt2 with the fix and my tilt2 is at times faster than my infuse. and of course there are times when my infuse is lighting fast in the same place (home)
but that fix makes a huge difference.
Ltilt2 said:
Actually, when I browse the internet, I compare the infuse and my tilt2 with the fix and my tilt2 is at times faster than my infuse. and of course there are times when my infuse is lighting fast in the same place (home)
Click to expand...
Click to collapse
are you checking the transfer rates o just going off feel? the android browser is not the best and on 2.2 feels laggy on hummingbird based phones. try opera mobile. when 2.3 becomes available you will see a world of difference.
if you confirm you are not getting transfer rate on the infuse that you get on the tilt then it may be a problem with your area. i assure you hspa+ works on the infuse and is faster than hspa. any bias towards the tilt in your area has to do withe the towers and network policies.
Dani897 said:
are you checking the transfer rates o just going off feel? the android browser is not the best and on 2.2 feels laggy on hummingbird based phones. try opera mobile. when 2.3 becomes available you will see a world of difference.
if you confirm you are not getting transfer rate on the infuse that you get on the tilt then it may be a problem with your area. i assure you hspa+ works on the infuse and is faster than hspa. any bias towards the tilt in your area has to do withe the towers and network policies.
Click to expand...
Click to collapse
try both phones on a speed test website like speakeasy.com
Dani897 said:
are you checking the transfer rates o just going off feel? the android browser is not the best and on 2.2 feels laggy on hummingbird based phones. try opera mobile. when 2.3 becomes available you will see a world of difference.
if you confirm you are not getting transfer rate on the infuse that you get on the tilt then it may be a problem with your area. i assure you hspa+ works on the infuse and is faster than hspa. any bias towards the tilt in your area has to do withe the towers and network policies.
Click to expand...
Click to collapse
I did try opera on the infuse but, I have a problem connecting. I always get, network error connection, please check your network connection settings.
on the tilt2, it always stays on H. on the infuse, it always changes to either, E, G, H+.
Do you guys know if HDPA is supported everywhere? cause it would be nice to tweak the infuse with just using H+ and H.
Ltilt2 said:
I did try opera on the infuse but, I have a problem connecting. I always get, network error connection, please check your network connection settings.
on the tilt2, it always stays on H. on the infuse, it's always changes to either, E, G, H+.
Do you guys know if HDPA is supported everywhere? cause it would be nice to tweak the infuse with just using H+ and H.
Click to expand...
Click to collapse
what it really sounds like now is that you have poor reception, how many bars do you see?
i guess it could be other problems with the tower, the tower just might not like the infuses modem files for some unknown reason. it could be a faulty infuse or it could be a problem in your local area.
Dani897 said:
what it really sounds like now is that you have poor reception, how many bars do you see?
i guess it could be other problems with the tower, the tower just might not like the infuses modem files for some unknown reason. it could be a faulty infuse or it could be a problem in your local area.
Click to expand...
Click to collapse
I always have 1 bar for both the tilt and the infuse.
Before I did the fix to the tilt2, oh boy, it sucked try getting a connection but after the fix, I connect every time and this was and is with 1 bar.
That's why I was saying, I wish we could get a fix, to get hdpa or h+ on the infuse all the time. I'm sure hdpa is supported everywhere.
Ltilt2 said:
I always have 1 bar for both the tilt and the infuse.
Click to expand...
Click to collapse
1 bar?! seriously.. come on dude
the problem doesnt have anything to do with the settings that came on your phone.. the problem is you dont have reception.
I forgot maybe 2 weeks ago there was a thread about changing the packet size of the data to speed things up... I think that helped a little, but I have no idea since I usually have pretty good signal
bradbusa said:
1 bar?! seriously.. come on dude
the problem doesnt have anything to do with the settings that came on your phone.. the problem is you dont have reception.
Click to expand...
Click to collapse
I know the problem is that I dont have good reception at home.....this only happens at home...but what I'm saying is that my tilt2 had the same problem with reception but after I did the dataspeed fix, I didn't have that problem any more...comprende????