Related
bad lucks. suddenly the touch screen doesnt work.
Dont know why. Try to hard reset and and cant use at all
does any1 have got this problem before
Finally works
waks finally it works,
I leave it for a while and do a charging for it.
Cause I though the battery should be in cold condition (winter time in Ozi)
And yeah it works, so if you guys found this problem try above solution and see if it works
noramly it works for 5 -10 min then it geting Fu&#d agein
sadly, this is happening to me as well. What apps have you installed? You're not by any chance using Sprite Backup 6? This problem only started when I installed Sprite Backup...conincidentally, I had a similar problem with my HTC Herald after using same programme, it may reset the backlight to off.
no i dident use sprite backup i had a lot os SPB stuff but i dot think it is any thing to do with it as HARD RESET dose NOT help ;(
what OS do u use Windows Mobile 5 or 6 ?
when it hapened to me i was on WM5 (i had it replaced)
recently i instaled WM6 on my new one it works great !
there was a post about some one having the same problem wich was FIXED by Upgrading to WM6 u shuld try it maybe !
if u will tellme if it workes !
u also cen unlock Ext_ROM and Get rid of ATT junk compleatly and u will get Unbranded ROM (it better if u not on ATT network in mi opinion)
maybe this is just a stupid thought, but do you use screen protectors?
i applied the one which palm has deliverd with it and shortly after that the screen didnt work. any hard- or softreset didnt help.
after removing it everythings works like before
nehvada said:
maybe this is just a stupid thought, but do you use screen protectors?
i applied the one which palm has deliverd with it and shortly after that the screen didnt work. any hard- or softreset didnt help.
after removing it everythings works like before
Click to expand...
Click to collapse
NO i dident use any screen protecters
interestingly, mine just failed the same way as yours just 15 minutes ago. Tried rebooting and eventually hard reset, samething.
I noticed it would work when it prompts "touch screen to begin calibrating". Once the screen is touched, the keyboard backlight lits up, and screen wouldn't respond anymore. If I tap the screen the keyboard backlight would flicker very slightly.
I am running WM6, NO APPS INSTALLED, no screen protector, fresh 2 weeks old phone.
Now I have to figure out how to revert it back to WM5 so I can send it in for replacement.
By the way, if you pull the battery out and let the phone sit for 10 minutes, it will cool down and act normal for few minutes. Enough to do the touch screen calibration thing in case if you are stuck there.
steph280 said:
By the way, if you pull the battery out and let the phone sit for 10 minutes, it will cool down and act normal for few minutes. Enough to do the touch screen calibration thing in case if you are stuck there.
Click to expand...
Click to collapse
yep...my treo exhibits exactly the same symptoms. It only started after I started using Sprite Backup and Handango Inhand. I have now turfed both and propose doing a hard reset and reinstall but don't hold out too much hope. I reckon it is basically a return to Palm job.
Waks it back to old problem again
Dont know why it doesnt work again
Try to upgrade to wm6 seems doesnt help at all.
This is my third Treo 750.
The other two had all a defect touchscreen.
It's a hardware problem.
nehvada said:
maybe this is just a stupid thought, but do you use screen protectors?
i applied the one which palm has deliverd with it and shortly after that the screen didnt work. any hard- or softreset didnt help.
after removing it everythings works like before
Click to expand...
Click to collapse
Mine also failed within a day of applying a screen protector. I got a new one from the AT&T store (still within my 30 days) and haven't had a problem since.
I don't want to go long w/o a screen protector, though...
After Upgrading to windows 6 Some times My phone screen suddenly fade to white , blue or black.. I've tried different roms and still the problem exist
can someone help me? what is happening to my universal? is it because WM6 still not stable?
please some one help me
free_10w said:
After Upgrading to windows 6 Some times My phone screen suddenly fade to white , blue or black.. I've tried different roms and still the problem exist
can someone help me? what is happening to my universal? is it because WM6 still not stable?
Click to expand...
Click to collapse
Which Radio Rom are you using ?
Try another
wout
I've been using 1.17 but when I use 1.15 the screen also fade to blue or white
Try without sd card
or
try older (reliable) wm5 rom
wout
I already try KAMAL WM5 but still it happens and I also forget to mention that when the screen fade to white or blue my phone suddenly become hot..is there any possibility that the problem is from the hardware?
That doesn't sound good.
could you try another battery ?
and turn wifi of
was wifi on ? when screen went with/blue
wout
Yes, I have try another battery and the wifi is off..
The screen went blue when I was receiving sms or when I want to send sms.
sometime when I left the phone standby for half an hour the phone cannot be turned on and I have to press the reset button and after entering the splash screen the screen went blue/white again so I have to reset several time
i think its something e related to the vibrate? its shorted or somehting and the power is going there but no vibration.. thus causing the overheating and the freezing.. im not sure but maybe.. also have you dropped the machine?
Appears to be a hardware problem. You may try this, it may work:
1. Remove the battery. Keep the battery out at least for a few hours.
2. With the battery out operate a few keys randomly. Also operate the on/off switch a couple of times.
3. Remove your sim card and storage card.
4. Put the battery back.
5.Allow the booting process without intruption.
6. If it works well just switch off, remove battery and insert the sim card and sd card. reboot
Although it sounds a bit wierd it does work in some cases. Worth giving it a try.
thanks Wout,dj_gabzz,d_ranade for the help
I have installed the official WM5 and now it seems ok..
it means that the problem is because of the roms not the hardware..
and once again thanks a lot guys
free_10w said:
thanks Wout,dj_gabzz,d_ranade for the help
I have installed the official WM5 and now it seems ok..
it means that the problem is because of the roms not the hardware..
and once again thanks a lot guys
Click to expand...
Click to collapse
Glad you could solve your problem.
same here man.. glad you got everything straightened out, i hope you dont encounter further problems..
once again thanks
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
If it is defect, you can replace your touchscreen for low costs. I paid 20 euro's for my new touchscreen. You also need an T6 torx to open your mobile.
negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
Get a new digitizer on eBay, fairly cheap and easy to replace. Can get one to match your housing color. Less than 20 Euro for sure.
thanks for reply back soon..
there is no way to recover my touch screen??
any technical way to recover my touch screen, techies help me out...
I don't seem how you could 'repair' it. I think it is broken or not. Or the connecter is not in the right position. If so you must open up your mobile either way. I think it's best to just replace the touchscreen it also removes the scratches if you have those. And it's very cheap.
thanks cywood.. its not broken, just it stops working..
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
digitizer
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
in your case, it will probably be fixed with a hard-reset.
jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
use mymobiler using that u can control ur mobile thru ur computer google for it
praveen_y76 said:
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
Click to expand...
Click to collapse
Hi Praveen,
from where u got the digitizer...? was it original?
mine also stopped working two days back. I am in chennai and just heard that HTC has opened a new service centre here so maybe i can try out my luck there.
negaboys said:
i recovered my touch screen..
i have wrote here http://www.negablog.co.cc about how i recovered my touch screen without replacing digitizer.
Click to expand...
Click to collapse
could you please give the exact link where you have mentioned about it?
Thanks
crapula512 said:
in your case, it will probably be fixed with a hard-reset.
Click to expand...
Click to collapse
The hard reset fixed my problem. I also had corrupt files on my microSD card, so I formatted it as well.
Its amazing how many problems that look like hardware issues are actually software/file system issues.
For those who jumped right to "replace the screen" as a solution, I believe you need to rethink your troubleshooting strategy, as you'll convince people to spend time and money performing a fix action that doesn't work.
mohitsapru said:
use mymobiler using that u can control ur mobile thru ur computer google for it
Click to expand...
Click to collapse
That is a great program! I've heard of it before, but never thought I would need it. It looks useful for getting screen shots from your mobile device as well.
Thanks!
repeated screen alignment problm
hi guys,
a month back my elfin screen stopped responding,after searching threads,i foundout that the digitizer was dead so i replaced it .touch response came back,but now every few mins i have to align the screen to have proper response.i m using onyx6.5 /mikys/ahen roms of latest build.and lower part of screen was not responding for touch some times,so to align screen was not possible as start button was in lower part in newer builds,so im starting roms of older builds in them start button is at top,where i came somehow reach screen alignment page.i m not able to find what is wrong wth my device??whether the digitizer was not working properly???
is there anyone who faced similar problm??any one there to help me out????
cant able to bypass alignment screen?
go here http://www.negablog.co.cc i had wrote about how to bypass the screen alignment screen,
change a new screen
Solution
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
I need to align the screen again & again can any one help me out wer the problem lies
how did this happen? i also encounter a similar problem, when the phone gets warm... when i press on the right side, the click registers mode and more to the left... and when that happend, if i try to go to the alignment screen, it just hangs in there like.. forever... if i put the phone in standby mode, everything gets back to normal in a few minutes.. the problem repeats every time the phone gets warm...
Same
First i was also having the similar problem but now its totally unaligned i.e even after a time its same i click on extreme left it click on extreme right
nasty man... dunno why this is happening... so, my screen is dying.. damn :| what kind of mods did u do to your phone? software ones
I have the same problem! Seems this is an manufacturing issue that's affecting many Diamonds! Does the warranty cover this?
Same problem
Hi Guys,
i'm also facing the same problem,
i have hard resetted my mobile then for a week it worked fine and then again the same problem... damn i lost my all data while hard resetting.... does any one have solution.
did u guys found n e solution
crazymushroom88 said:
did u guys found n e solution
Click to expand...
Click to collapse
YEAH! ) i sent mine to warranty today, lol 15 long days at max until it will be back in my loving arms
i dont know if this might help
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
i can see some leaked fluid above my screen ........... i cannot even explain it , because it's above the screen but i cannot touch it ........ so it's in between.....
i've had the same thing happen to me and sent it in for warranty.
came back ok for awhile, now its happening again. I usually just suspend my phone (power button) and give the LCD a rub that helps it a little, buts its quite unbearable at times.
I've sent it in to warranty for a second time today, warranty is expiring on the 8th of next month so they better fix it by then .
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again.
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again. (Only gets blurry flickery at boot)
My diamond only get flickery at the boot and by going to standby and back it disapears.
Guess im lucky
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
Please do update if replacing the LCD does in fact get rid of the problem
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
dont think that actually helps - you'll prob need to replace the digitizer .
hello2004 said:
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
Click to expand...
Click to collapse
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
reflexivemedia said:
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
Click to expand...
Click to collapse
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
realazyjai said:
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
Click to expand...
Click to collapse
i assure you cannot replace just the lcd, not without a hammer! I got my old part back, I can take some pictures of it, just in case And the digitizer is one and the same with the front case... the diamond is a very small phone, that's why there are no screws or other stuff to hold together the lcd and the rest of the case.
So unfortunately for you, they may have told you they replaced the lcd, but i think they did nothing :|
It is very clear that we had the same problem... the digitizer itself got broken... not some cable or lcd
anyway, if your phone has warranty, you are a happy man
Hi, the other day while I was using my OPO as a GPS unit in the car, it seemed to freeze and restart, but it didn't boot. I thought it was just an empty battery problem. But since then, I haven't been able to use my phone again.
Apparently, it boots correctly, but I can't see anything on the screen. I say it boots correctly because I can hear the notifications, the led blinks, and I can even feel the feedback if I touch the capacitive buttons. Also I was able to backup my data through adb. But the screen is completely black. The only moment where it shows something is at the moment of booting, where the cyanogen logo should be, but it's completely scrambled (see attachment)...
I tried going back to stock (with the help of Bacon Root Toolkit) with no luck.
Has anyone faced the same problem? Do you think it might be a software problem? Otherwise, do you think it's a screen problem that I can fix changing the screen? Or it might be a problem with the GPU and changing the screen will not accomplish anything?
Thanks in advance for your help.
Cheers,
Capelare.
PS: Well, apparently I can't post the image since I just registered. It's here anyway: i_imgur_com/V9oH2el.jpg Just change the _ for dots, please. I'm sorry for the inconvenience.
bump
Nobody knows what might be the problem?
Reflashing didn't help anything? Even with wiping all data?
Then i think its an hardware- based problem.
Capelare said:
Hi, the other day while I was using my OPO as a GPS unit in the car, it seemed to freeze and restart, but it didn't boot. I thought it was just an empty battery problem. But since then, I haven't been able to use my phone again.
Apparently, it boots correctly, but I can't see anything on the screen. I say it boots correctly because I can hear the notifications, the led blinks, and I can even feel the feedback if I touch the capacitive buttons. Also I was able to backup my data through adb. But the screen is completely black. The only moment where it shows something is at the moment of booting, where the cyanogen logo should be, but it's completely scrambled (see attachment)...
I tried going back to stock (with the help of Bacon Root Toolkit) with no luck.
Has anyone faced the same problem? Do you think it might be a software problem? Otherwise, do you think it's a screen problem that I can fix changing the screen? Or it might be a problem with the GPU and changing the screen will not accomplish anything?
Thanks in advance for your help.
Cheers,
Capelare.
PS: Well, apparently I can't post the image since I just registered. It's here anyway: i_imgur_com/V9oH2el.jpg Just change the _ for dots, please. I'm sorry for the inconvenience.
Click to expand...
Click to collapse
Try booting into fastboot (volume up and power when off) you will hear a vibration and fastboot mode should come up, if this doesn't happen, it's pretty much a dead giveaway that the hardware is broken
matze222 said:
Reflashing didn't help anything? Even with wiping all data?
Then i think its an hardware- based problem.
Click to expand...
Click to collapse
noahvt said:
Try booting into fastboot (volume up and power when off) you will hear a vibration and fastboot mode should come up, if this doesn't happen, it's pretty much a dead giveaway that the hardware is broken
Click to expand...
Click to collapse
Thank you! Nothing happens with any of those methods. So yeah, I also suspected that it's a hardware problem... But do you know if I can figure out if it's the screen or the graphics system (I don't know how to call it other than graphic card... and it's not a card lol) before purchasing a screen replacement... Any ideas?
Thanks again,
Capelare.
Capelare said:
Thank you! Nothing happens with any of those methods. So yeah, I also suspected that it's a hardware problem... But do you know if I can figure out if it's the screen or the graphics system (I don't know how to call it other than graphic card... and it's not a card lol) before purchasing a screen replacement... Any ideas?
Thanks again,
Capelare.
Click to expand...
Click to collapse
I find it hard to believe that the gpu is broken, the cpu, gpu and more are all on a single chip and I don't think one part can just fail without the others failing too... but you never know, if you can still send it to oneplus for warranty do it, it saves you a lot of time. If you can't there are a few things you can do:
1. If you had usb debugging enabled and authorized to your pc, you can try to use some screen mirroring software on your pc that works via usb.
2. Contact a repair shop that will allow you to test a new or used display with your current phone.
3. Try connecting your one to a tv by using a micro usb to hdmi cable (DON'T KNOW IF THE ONE SUPPORTS THIS!!).
Good luck!
noahvt said:
I find it hard to believe that the gpu is broken, the cpu, gpu and more are all on a single chip and I don't think one part can just fail without the others failing too... but you never know, if you can still send it to oneplus for warranty do it, it saves you a lot of time. If you can't there are a few things you can do:
1. If you had usb debugging enabled and authorized to your pc, you can try to use some screen mirroring software on your pc that works via usb.
2. Contact a repair shop that will allow you to test a new or used display with your current phone.
3. Try connecting your one to a tv by using a micro usb to hdmi cable (DON'T KNOW IF THE ONE SUPPORTS THIS!!).
Good luck!
Click to expand...
Click to collapse
Thanks, I can't send it to oneplus because this screen is already a replacement and I changed it myself. I will try asking for another display
I didn't know the gpu and the cpu were on the same chip, but I also think it's not likely that one would fail and not the other.
Cheers,
Capelare.