Cross-vendor simple update to the latest ROM posted on FTP - JAMin, XDA Neo, S200 Software Upgrading

Hi All!
To simplify the update to the latest Dopod ROM for non-Dopod devices, I have posted the ROM as the unpackaged fileset with update utility replaced to one not checking vendor ID.
How to use:
1. Download the ZIP here: ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
2. Extract all the files in one folder
3. Go to the folder and run ROMUpdateUtility.exe
4. Follow the screens as usual
5. Restart and enjoy
Used to update my Qtek S200 to Dopod ROM. Should work for any other vendor, including Dopod itself as well
Disclaimer: It is just repackaged files got from this site with no addition from me. Use it at your own risk. I have no ability to support you.
Edited: the URL is fixed...

Any chance you could provide a imate ROM that will work on any device the same way?

Mandingo said:
Any chance you could provide a imate ROM that will work on any device the same way?
Click to expand...
Click to collapse
Try using the ROMUpdateUtility.exe from the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip in the ftp folder to the i-mate JAMin ROM.

Tried that with no luck. I will give it another go though.

ROM upgrade begins just fine but fails at 95%
ERROR [326]: INVALID COMMAND
This NBF file cannot be used for your PDA Phone. Please check your NBF file.
Weird - what is so special about the last 5%?

Qtek S200 rom upgrade
Thanks J.Walker!
My original rom was: RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship, I've now flashed with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip and it works great!
I also did a soft reset just before customisation begins to prevent the files from the extended rom from installing (no smartdialing or MMS but I don't use these anyway) and my unit is much, much faster....
Also with this rom if you change the default input method, after a soft reset it stays changed (this was a problem with my original rom)
Thanks again - I've been using this new rom for a week now and it is slick!!
G

Re: Cross-vendor simple update to the latest ROM posted on F
Thanks so much for your post and guidance!
Just flashed my S200 with no problem at all, the process completed as you described in less than 10 minutes with all the stops at 80%, 95% and 100%.
The new ROM works fine for the last hour except that I have a little snag with the GPRS connection, with all the proper settings for MTS it refuses to connect, everything else seems fine.
Any suggestions on the GPRS question will be appreciated.

Re: Cross-vendor simple update to the latest ROM posted on F
could u list the contents/extrom/versions of your ROM?
J.Walker said:
Hi All!
To simplify the update to the latest Dopod ROM for non-Dopod devices, I have posted the ROM as the unpackaged fileset with update utility replaced to one not checking vendor ID.
How to use:
1. Download the ZIP here: ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
2. Extract all the files in one folder
3. Go to the folder and run ROMUpdateUtility.exe
4. Follow the screens as usual
5. Restart and enjoy
Used to update my Qtek S200 to Dopod ROM. Should work for any other vendor, including Dopod itself as well
Disclaimer: It is just repackaged files got from this site with no addition from me. Use it at your own risk. I have no ability to support you.
Click to expand...
Click to collapse

Re: Cross-vendor simple update to the latest ROM posted on F
farbird said:
could u list the contents/extrom/versions of your ROM?
ROM:2.15.13.27 WWE
ROM DATE 3/9/06
RADIO: 02.19.21
PROTOCOL: 4.1.13.09
ExtROM: 2.15.13.121
Thanks for any eventual suggestions.
Click to expand...
Click to collapse

Re: Cross-vendor simple update to the latest ROM posted on F
stefchik said:
Thanks so much for your post and guidance!
Just flashed my S200 with no problem at all, the process completed as you described in less than 10 minutes with all the stops at 80%, 95% and 100%.
The new ROM works fine for the last hour except that I have a little snag with the GPRS connection, with all the proper settings for MTS it refuses to connect, everything else seems fine.
Any suggestions on the GPRS question will be appreciated.
Click to expand...
Click to collapse
С МТС старая и широко проблема, нужна специально обученная прошивка радио, а она идет только в русских ROM-ах, в сервисе так же ее могут влить. Ищи в русских форумах по кутеку.

Re: Cross-vendor simple update to the latest ROM posted on F
[/quote]
С МТС старая и широко проблема, нужна специально обученная прошивка радио, а она идет только в русских ROM-ах, в сервисе так же ее могут влить. Ищи в русских форумах по кутеку.[/quote]
Spasibo,
and I thought it was the radio version of the S200; solution would be to drop the MTS to a new Beeline number or whatever else; not a big deal!
Thanks anyway - I can now relax.
I can only say that the new ROM is by far better than any!

has anyone compared the usability of this rom with installed extrom and without extrom? is there any speed issues like those in o2.de rom? is there any must-have cabs in this rom?
excuse my english

Link is dead to me.

ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip[/url]

Arcanil said:
Link is dead to me.
Click to expand...
Click to collapse
Fixed...
FYI: much longer tread for the topic is here: http://forum.xda-developers.com/viewtopic.php?t=49298

Mandingo said:
ROM upgrade begins just fine but fails at 95%
ERROR [326]: INVALID COMMAND
This NBF file cannot be used for your PDA Phone. Please check your NBF file.
Weird - what is so special about the last 5%?
Click to expand...
Click to collapse
any solution to this... my jamin is stuck at bootloader mode now..
ive tried different roms but all are giving errors like above and more..
i was trying the pdamobiz version 1.0 rom upgrade when the trouble started..it showed me rom successfully updated screen on the pc and the jamin rebooted but got stuck at the startup screen (showing me new rom details but ob blue imate splash screen) i reset it afer 10 mins of being stuck and now its just at the bootloader screen after trying to flash the same pdamobiz rom again.. and i didnt do a cid unlock on it first!
can some one save my jamin???
thanks

zohaer21 said:
Mandingo said:
ROM upgrade begins just fine but fails at 95%
ERROR [326]: INVALID COMMAND
This NBF file cannot be used for your PDA Phone. Please check your NBF file.
Weird - what is so special about the last 5%?
Click to expand...
Click to collapse
any solution to this... my jamin is stuck at bootloader mode now..
ive tried different roms but all are giving errors like above and more..
i was trying the pdamobiz version 1.0 rom upgrade when the trouble started..it showed me rom successfully updated screen on the pc and the jamin rebooted but got stuck at the startup screen (showing me new rom details but ob blue imate splash screen) i reset it afer 10 mins of being stuck and now its just at the bootloader screen after trying to flash the same pdamobiz rom again.. and i didnt do a cid unlock on it first!
can some one save my jamin???
thanks
Click to expand...
Click to collapse
just start bootloader (hold camera+short soft reset), then again start dopod latest rom no-vendorID

Just one tiny comment:
Unpacket files of firmware you can find in temporary directory that appers in c:\temp folder after starting update utility, provided by manufacturer (file RUU_...exe). You need to copy the folder to another place, abort the upgrading process, replace update utility witch cracked one and then start it again.

Cant Download ftp://xda:[email protected]
Hi Guys!
I cannot download this file
ftp://xda:[email protected]
is there any other http or ftp site to dwonload it
thanks

Jamin
zohaer21 said:
any solution to this... my jamin is stuck at bootloader mode now..
ive tried different roms but all are giving errors like above and more..
i was trying the pdamobiz version 1.0 rom upgrade when the trouble started..it showed me rom successfully updated screen on the pc and the jamin rebooted but got stuck at the startup screen (showing me new rom details but ob blue imate splash screen) i reset it afer 10 mins of being stuck and now its just at the bootloader screen after trying to flash the same pdamobiz rom again.. and i didnt do a cid unlock on it first!
can some one save my jamin???
thanks
Click to expand...
Click to collapse
I'm stuck at bootloader too with JAMin, and cant find any rom to fix it. I need help!

Related

Dop Upgrade Problem...Is there any one who can help?

Upgraded to Dop ROM form original Imate ROM. Now I can't get back. Upgrade is stuck at 95%..or I get Error [296] "Upgrade only This NBF cannot be used on your PDA Phone.. Please get newrer NBF file" . If flash Dop again it works, but refuses to flash any Imate. I guess I'm not the only one here having this problem...many have posetd this problem in different ways but now one gave a concrete answer.
Please let try to solve this.
Thanks
whehe, i'll ask someone who flashed mine back to a JAMin (thought he did it with a-wizard, hope he can help you out).
only the OS itself can be flashed back, you manually have to replace the extended ROM with the JAmin one (total commander, delete existing extended ROM, transfer files through IR to exdended ROM, hard reset to install the extended ROM, bla).
the GSM ROM and the bootloaded itself cannot be flashed to an older version.
yeah, i know, it sucks
Thanks tCC for replying with this goosd news. As for the extended ROM replacment, that's OK and can be easely done.
I realy appreciate your assistance in this and awaiting your next post.
Hi,
i'm the one who flashed the JAMin of tCC. In fact, it's not that difficult. Just follow these steps:
- execute enablerapi.cab on your device (search on the forum for this cab file)
- download awizard, extract
- copy the jamin os rom to awizard\rom\Jamin\
- start awizard.cmd, make sure your device is connected through activesync
- select option 'w' to write the os rom. just follow the instructions.
- the flashing can take up to 30 minutes so be patient
-if the flashing has finished hard reset your device
I've uploaded the jamin os and ext rom to
ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
tya
swartb said:
Hi,
i'm the one who flashed the JAMin of tCC. In fact, it's not that difficult. Just follow these steps:
- execute enablerapi.cab on your device (search on the forum for this cab file)
- download awizard, extract
- copy the jamin os rom to awizard\rom\Jamin\
- start awizard.cmd, make sure your device is connected through activesync
- select option 'w' to write the os rom. just follow the instructions.
- the flashing can take up to 30 minutes so be patient
-if the flashing has finished hard reset your device
I've uploaded the jamin os and ext rom to
ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
Click to expand...
Click to collapse
First let me thank you swartb for replying and trying to help by posting and uploading. And of course tCC who offerd to help in the first place.
Second, the link for the file you uploaded is not correct, and if you allow me i think this is the right one:
ftp://ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
And as far as enablerapi.cab here is the thread for it:
http://forum.xda-developers.com/viewtopic.php?t=50768&highlight=enablerapi+cab
Currently I'm downloading them and will let you know the result.
Thank you both again
swartb said:
Hi,
i'm the one who flashed the JAMin of tCC. In fact, it's not that difficult. Just follow these steps:
- execute enablerapi.cab on your device (search on the forum for this cab file)
- download awizard, extract
- copy the jamin os rom to awizard\rom\Jamin\
- start awizard.cmd, make sure your device is connected through activesync
- select option 'w' to write the os rom. just follow the instructions.
- the flashing can take up to 30 minutes so be patient
-if the flashing has finished hard reset your device
I've uploaded the jamin os and ext rom to
ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
Click to expand...
Click to collapse
can you cid unlock after installing an older rom?
still it's not working...
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Hi,
I don't remember if I did see that error message. But if do a hard reset after this error the os rom is not updated?
And be sure just to update the OS rom and not the other roms (radio, spl & extended) because that doesn;t work.
I have just completed this aWizard process and now need to hard reset, but the program "clear storage"is not there anymore.
How can I hard reset the prophet without the software?
I will post the steps here when it is done :wink:
Could ran the aWizard with the OS rom in the aWizard folder (not \aWizard\rom\jamin\ ) but could not find way to hard reset the prophet, so reflased back to Dopod.
Hope another person continues from here :wink:
Re: still it's not working...
ahegazi said:
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Click to expand...
Click to collapse
Its because the CID of your device is still locked. And certainly you have IPL/SPL 2.00. or higher. Swart did it with no problem because he has an unlocked CID.
You have to downgrade your IPL/SPL to 1.xx (I still dont know the correct method) and then unlock CID and then you can flash any ROM you want
Re: still it's not working...
ahegazi said:
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Click to expand...
Click to collapse
Its because the CID of your device is still locked. And certainly you have IPL/SPL 2.00. or higher. Swart did it with no problem because he has an unlocked CID.
You have to downgrade your IPL/SPL to 1.xx (I still dont know the correct method) and then unlock CID and then you can flash any ROM you want
Thanks. Guess I can live with it for now. The Dpod rom is quite stable. No soft reset for 2 days and response looks like quicker than after soft-reset 8)
Re: still it's not working...
Tamagochi said:
ahegazi said:
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Click to expand...
Click to collapse
Its because the CID of your device is still locked. And certainly you have IPL/SPL 2.00. or higher. Swart did it with no problem because he has an unlocked CID.
You have to downgrade your IPL/SPL to 1.xx (I still dont know the correct method) and then unlock CID and then you can flash any ROM you want
Click to expand...
Click to collapse
Thanks Tamagochi, Yes you are right, I have I IPL 1.00 and SPL 2.15.0000
The problem now is how to dowgrade form 2.xx to 1.xx. What are those methods that would help? I can try all of them and see if it works.
Finally it's resolved
I'm back to my imate ROM. Detailes in here:
http://forum.xda-developers.com/viewtopic.php?t=52244&start=25

New BETA ROM: RUU-Prophet-AKU2.3-2.20-2.47.21-Jester-b2

Hi,
I've created another BETA ROM for the Prophet
This ROM will upgrade your SPL to 2.20.000 (2.20.0001 if you have a G4 Model)
This ROM will upgrade your Radio to 02.47.21
This ROM contains the stripped PDAMobiz Final AKU 2.3 OS
This ROM contains the stripped Qtek ExtRom (2.20.7.114)
This ROM has a changed CID (now 11111111) (This needs testing on G4)
This ROM has a standard page pool of 12MB
I've taken the base Qtek 2.20 OS and incorporated the AKU 2.3 files from the PDAMobiz OS, however, I've removed all the extra "junk" so this is a pretty clean ROM.
The ExtRom base came from the Qtek 2.20 ROM, however, it has the qtek links/images removed.
For the dutch users, i've patched this ROM so it doesn't change "wel" into "we'll" when you create an SMS
I've been running this version for a day now without problems, but further testing is needed.
My ExtRom:
A2DP_Patch.cab
AutoRun.exe
Cert_SPCS.CAB
Config.txt
MP_Customization_Prophet_Qtek_WWE_051205.CAB
MP_CVSDcpl_20060220.cab
MP_mHub_WWE_060124-2.CAB
MP_MMSAutoDisconnect_060106.CAB
MP_SmartDialing_enable_0915_signed.CAB
MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB
P_ECall_112_911_QTEK_Wizard.cab
P_PT_EnableSPN_Wizard_20060109.CAB
PP_DisconnectButton_16.CAB
PP_ExtVersion.CAB
PP_OperatorName.CAB
PP_Prophet-UAProf_AKU2.sa.CAB
Signed_A2DP_Cert.cab
Just download, run the file and after the upgrade is done, hard reset your Prophet (hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button)
As this is a BETA, please report any errors here, thanks
For G3 ONLY:
Removed, beta 3 released
For G4 ONLY:
Removed, beta 3 released
Uploading........
Done uploading, enjoy
P.S.
For the people who don't like my splash screen (come on, it is sooooo nice )
You can use the file below to change the splash screen to the standard HTC Logo
Download
Hi,
I ran the update, after it reaches 100% it switches off and come back on again.
IPL 2.10.0001
SPL 2.20.0001
The i-mate screen is in the background. It just stays like this.
What do I need to do?
I then waitied for 30 minutes, decided to: "hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button" it said format complete and went back into the above screen
What do I do now!
Please help!
splash screen custumisation
Jesterz said:
You can use the file below to change the splash screen to the standard HTC Logo
Download
Click to expand...
Click to collapse
firstly, thanks for your efforts
secondly if I wanted to customised the splash screen with personal identifying information in case it got lost/stolen, God forbid.
Then how would I do it.
obviously will need an image in what dimensions and format and how to flash
Same error here.....
JD
rockgeek said:
Hi,
I ran the update, after it reaches 100% it switches off and come back on again.
IPL 2.10.0001
SPL 2.20.0001
The i-mate screen is in the background. It just stays like this.
What do I need to do?
I then waitied for 30 minutes, decided to: "hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button" it said format complete and went back into the above screen
What do I do now!
Please help!
Click to expand...
Click to collapse
Yes tried twice now.....it halts after the ipl/spl display.....ie does not get as far as gsm and os display, it must lock out i think.....
This is G4
JD
johnnyduk said:
Yes tried twice now.....it halts after the ipl/spl display.....ie does not get as far as gsm and os display, it must lock out i think.....
This is G4
JD
Click to expand...
Click to collapse
OK, sorry about this, I don't have a G4 but a G3, so its hard to test
I will remove the G4 link for now, until I have this fixed.
Please post SPL/IPL versions on which you tried this
People with a G4 having the problem described above, can you please try this ROM and let me know if it works ?
download
I think the G4 has more checks on the ROM then the G3
Let me know if the above ROM work, so I can fix beta 2
Thanks
Good Work, man!
I extract only OS and ExtRom and upgrade with UPGRADE_ROM.BAT (PDAmobiz construct). Work fine on my G4!
Please replase stylus1.96.gif (look attach). In you rom stylus1.96.gif have "Visit PDAmobiz.com"
Testing
Testing now and will let you know ASAP
Seems fine for the new link
Thanks!
IPL 2.10.0001
SPL 2.20.0001
Does not work...just downloading your update...
JD
Jesterz said:
OK, sorry about this, I don't have a G4 but a G3, so its hard to test
I will remove the G4 link for now, until I have this fixed.
Please post SPL/IPL versions on which you tried this
Click to expand...
Click to collapse
lvsw said:
Good Work, man!
I extract only OS and ExtRom and upgrade with UPGRADE_ROM.BAT (PDAmobiz construct). Work fine on my G4!
Please replase stylus1.96.gif (look attach). In you rom stylus1.96.gif have "Visit PDAmobiz.com"
Click to expand...
Click to collapse
Privet lvsw (I think you are russian ?)
I will update this ROM tonight/tomorrow with beta 3
I hope to get the G4 issue solved (not using the pdamobiz .bat file) and I will replace the stylus1.96.gif
Hi
Does not work with the new update either......
JD
johnnyduk said:
IPL 2.10.0001
SPL 2.20.0001
Does not work...just downloading your update...
JD
Click to expand...
Click to collapse
johnnyduk said:
Hi
Does not work with the new update either......
JD
Click to expand...
Click to collapse
strange, as rockgeek doesnt have a problem.
Can you try the original Qtek 2.20 WWE first, see if you phone works fine, then we continue testing....
Yes i have done that, it still fails on your upgrade.....i can only install lsvw's at this stage
Which is a lovely ROM I have to say...
JD
Jesterz said:
strange, as rockgeek doesnt have a problem.
Can you try the original Qtek 2.20 WWE first, see if you phone works fine, then we continue testing....
Click to expand...
Click to collapse
links removed
Beta 3 will be release later today
AbuYahya said:
firstly, thanks for your efforts
secondly if I wanted to customised the splash screen with personal identifying information in case it got lost/stolen, God forbid.
Then how would I do it.
obviously will need an image in what dimensions and format and how to flash
Click to expand...
Click to collapse
I can change the 2nd splash screen (Windows Mobile logo), but not the 1st one (boot up logo that appears 1st after reset - in this ROM: Jesterz's clown splash)
I tried using both the awizard prog & the splash_bmp_to_wizard.exe but always get the ITWriteDisk error. Yes, I have run enablerapi.cab on my device already.
Anyone have had any success?
I am trying to apply this theme: http://www.coolsmartphone.com/forum/dload.php?action=file&file_id=35 but I can't see it anywhere to install. Please help!

Probs after install Faria wwe wm6

Hi there,
I have a MDA Vario (G4) from T-Mobile and after following this http://forum.xda-developers.com/showthread.php?t=297762 and this http://forum.xda-developers.com/showthread.php?t=293480
I was able to install Faria's ROM on my Wizard but now i'm having some problems:
1 - I still have to watch that ugly bootscreen
(by the way, are those version numbers "right"?)
2 - Every time i reboot it i get this error about sddaemon
Problem solved:
knwlsh said:
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
Click to expand...
Click to collapse
3 - I often get this error about TimeWizard.exe
4 - As you can see on the previous photo, the memory is running low and so I everytime i try to syncronize with ActiveSync 4.5 (Beta2) i get this
Can anyone help me on those?
Thx
(Forgot to say thank you to Faria and Mun_rus. So... Thanks a lot!)
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Did you flash with shell tool? I think that you have no extended rom flashed, only OS.
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
funman said:
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Click to expand...
Click to collapse
DON'T use the 2.26 rom.... u've got a G4 and can't update IPL/SPL!
I downloaded this ROM
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
and tried to flash it but when it starts (the PPC screen turns red,green,blue) it gives me an error msg on the PC saying "ERROR [294]: INVALID VENDER ID"
(this PPC came from UK)
I tried to use the mun_rus How To with this ROM but apparently it stayed the same.
From the UK T-Mobile i can only find this http://www.tm-phonedownloads.com/download_manager_mda_vario.html
but i think this is what a I have now running.
Ideas???
-----------------------------------------------------------------------
As for the Extended Rom i followed this:
http://forum.xda-developers.com/showthread.php?p=1172768&highlight=extended+rom+g4#post1172768
but i will double check it the next time i flash my Wizard.
(deleted - the same as the above)
Problems Aswell
Sorry if this has been mentioned many atime before but my rom is like really slow sometimes and most of the time on the today screen only the time/date is shown and no other items. Also when turning on the device sometimes it doesnt get pass the boot screen (green one) and is resolved by taking the battery out which is annoying. Someone said by putting the orginal factory rom then installing farias rom then it will improve - tried that same thing. And outlook wont let me change email type from plain text to html.
Anybody Know???
seanmig said:
Tried this one:
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
The PPC screen goes red, blue, green but then it gives me an error msg on the PC saying "WRONG ID VENDOR" or something similiar.
Click to expand...
Click to collapse
Missed my post or want a bricked device? You're CID-locked.... look here:
http://forum.xda-developers.com/showthread.php?t=298613
Actually I did miss you post.
Wizard still working
As for the link that you suggest it ends with de Mun_rus' HowTo and that was the one that i followed to flash Faria's Rom
--------------------------------------------------------------------------
knwlsh:
Sddaemon problem solved. At least it seams so...
Hey,
I just did the SAME upgrade you did and I am getting the same
timewizard.exe popup!
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
I have EVERYTHING working on wm6 with faria except for the annoying
popup.
have you been able to get ride of it?
Jeff
jeffr said:
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
Click to expand...
Click to collapse
Is that a WM5 backup you restored? WM6 has stuff in the registry in different places. You've probably added a bunch of keys that shouldn't be there, and in the wrong place.
Also, WM6 PIM database is different format. If you restored that, its likely thats been hosed too.

Ok the thing is not working

Hello I have done all the Faria tutorial and got it unlocked and IPL AND SPL 3.08, but when I tried flashing a WM6 rom the process stuck at 6% and the update program gave me a "conection failure" error and then started a step by step recovery process... I have done it and now i´m with the 3 colors screen (red green blue) but I´m trying to flash a rom to it without success. why is that? can someone help me?
you need to read this thread
http://forum.xda-developers.com/showthread.php?t=314646
I hope you weren't flashing with vista. I think it requires the shell tool.
no, no vista.
I have followed EVERY instruction in the VIPPIE: http://forum.xda-developers.com/showthread.php?t=298613 and FARIA tutorials, the problem was that when flashing it gave me a connection problem at 6% and then is not stuck in the bootloader screen. I hope my phone is not damaged since i´m in brazil. But I´ve tried several roms without success... they say problems with version OR with connection. Why can that be?
it stays a long time in "verifying the information on your PDA phone..." and then it returns those errors I´ve mentioned.
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
thank you man!!! I will try that right away!!!
n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
fscussel said:
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
Click to expand...
Click to collapse
Once unlock...always unlocked unless you reversed the procedure.
If your flash of a custom rom fails again, your device is probably not CID unlock and you need to go thru the unlocking process again.
ok after fixing the problem with the n3rxs help I´ve flashed the Wizard Love rom to prepare to flash a WM6 rom. The Wizard love rom i´ve used has a Italian instalation program, is that right? after I installed it the cell phone keeps reestarting I can´t do anything in it, it only loops restarting... what´s that?
found the solution, had to keep the camera button pressed and then reset the device so it enters in BootLoad mode then I flashed a original cingular bios and after that upgraded to WM6 without a glitch!!

removing hardspl

hi guys i installed the 3vloution series rom and when i wish to change it back to the original htc rom it gets disconnected and connected at 14%.. however it hangs at 27%..
help appreciated
Hi @ll,
yes, that behaivior can I confirm. My Snap do the same. A reflash to the EVO rom afterwards works fine...
Any Ideas...how to get the orginal 6.5 back to the Snap?
Thx and regards
Frank
same here
Any solutions in the meantime???
Got it!
Hi,
I found a woking way to go back to the original ROM (and SPL) . But I'm quite sure, that it isn't the easiest way to do that - it killed my nerves and pushed me into desperation in the meantime
Before I was on SPL 1.17 and the flash of original ROM hung at 26%
Sounds crazy, but that's what I did:
1) flashing Hard SPL 1.19
2) flashing Original SPL 1.19 (TriColor Screen showed 1.19 0000)
3) tried to flash Original Snap WM 6.5 ROM GER
=> flash hung at 17%
4) tried to flash 3VO Evolution
=> Error, because of Original SPL
=> not possible to flash Hard SPL, because ActiveSync-Connection is required
At that time desperation grew to panic. NOTHING worked, so I thought I broke it and can't get it to life anymore
5) tried to flash Original Snap WM 6.5 ROM GER again
=> flash hung at 17%
=> at next start I realized that SPL-Version had changed to SPL 1.23 0000
6) tried to flash Original Snap WM 6.5 ROM GER again
=> flash worked and the Snap is back to delivery status
maybe it will work for you too
confused
what did u do?? i have the ssame problem
PRoblem solved!!
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
xxchapin1ra7xx said:
just go to jockyw website install the original sslp NOT the HARD sslp
and it should update like normal
Click to expand...
Click to collapse
You have a link for his site? I would like to remove the HARDSPL. Thanks.
sikkboy626 said:
You have a link for his site? I would like to remove the HARDSPL. Thanks.
Click to expand...
Click to collapse
Please have a look at the 4th sticky in this forum. It's a little bit hidden but the title is about "HardSPL, Original SPL and JockyW"...
And then I recommend to perform the steps in the order I stated before.
Good Luck!
its on the xda website in the maple rom devlopement
sorry i would post a link but im a new member and new members cant post links

Categories

Resources