The V-clip BT earphone worked fine with my 818 pro before. I upgraded the rom to 2.15.13.27WWE yesterday, everything's fine....but the V-clip stays silent when there's an incoming call. I still can answer & listen, but just the poor little v-clip doesn't beep anymore. Anyone can help or encounter the same problem???
Related
I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.
me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??
bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers
Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks
Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly
The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD
Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.
Hi all.
Well, having updated to Darkforce rom and radio 1.15, I have *nearly* been convinced to switch to WM6 permanently. However, one issue is still plagueing me, and has been the same in all WM6 roms, no matter what radio I have installed.
When I get an incoming call, my headset will not reconnect. I hae to manually press the headset button to get audio to the headset, then again to answer the call. This does not always work. In WM5, my headset (Blutrek G2) can be in sleep mode, but the UNiversal always wakes it up for an incoming call.
Anyone have any ideas?
Thanks muchly.
Darkforce wm6 & radio 1.15 & sony hbh660: incoming and outgoing calls perfectly working without any button push.
Thanks for the reply. I've decided to ditch the Blutrek. Bought a Sony HBH-PV700 today and all is fine. Voice dial working as well
Hi guys!
I am a little confused by all the names this little phone is called, so i hope this is correct thread.
I can connect the headset and listen to music using WMP. I can answer a call while i´m still listening to music(it pauses), but when it switches back to the player the sound is gone. All calls works but I can´t listen to my WMP. After a soft or hard reset i work again, until it rings again.
I´m using the tornado patch posted by kyunga and khuanchai(.reg import)
If someone know anything, please tell me...
//Johan
I have a ds-970, and I have tested motorola and nextlink spider bluetooth stereo headsets. The problem you are experiencing is specific to the ds970, moto and nextlink automaticallys switch back to wireless stereo after call. w/ ds970, only thing that I have found to fix this is to manually activate wireless stereo (comm manager, bluetooth settings) after a call. yeah, that is a pain.
Thanks for the info. Well, I was hoping that there would be some sort of adjustment in the .reg department.
You just can´t win em all.....
Edit: I found a solution... I tried Crossbow_Reloaded(WM6) and now it´s working... The sound is a little bit distorted in the upper freq. range though, but hey...you just can´t win em all
HI all!
I adore my S710 and i have flashed it
with Frauhottelmans Neorose v1.0
and it works great!
So to the problem, when i have headset
connected to the phone and listens to music,
everytime i get a message the music turns low
and sound is coming from the speaker so everyone can
hear it. and somehow i want to resolve that problem.
Any help someone?
Regards from Sweden
Hi,
I could connect it (meizu chinese phone = comparable to sam s7 hw) to my headunit bt and there I had no problem with pairing it this meizu phone etc at all..
but I did not hear any sound (voice) from the/my car speakers came when I called someone (or home) and I did not hear a ring tone if I dialed a phone number too, after trying and trying to find a solution to it but nothings benefiting/helped.. yesterday I told meself why not tried an older firmware version of this meizu chinese phone you have nothing to lose.. right? and indeed, I have a fw that 1 year (almost) old is flashed it with it and you would not believe it mate, it worked immediately, I heard the ring tone and also the sound (voice) comes from the/my car speakers when I make a phone call as it should too!.
I hope it is useful to you guys too.
try