Related
I have MDA on T_Mobile UK and would like to upgrade to the latest rom but am confused by so many posts and different lanuages.
Could anyone just tell me
1) How to back my rom up incase of problems
2) How to get the latest english rom with the patch for more memory
3) How to install it
4) How to put all the t-mobile settings back ie GPRS etc
TIA
I have an MDA Compact from T-Mobile UK and I upgraded with the Q-Tek 1.11 ROM doing the rounds. I forgot all about the ext rom, but after I upgraded I restored a full backup I had created using Sprite Backup. I asked on this forum if restoring the backup negated the ROM upgrade in any way, but no-one seemed to know. Anyway, all the T-Mobile customisation came back and there have been no problems since.
AS soon as I can get a proper T-Mobile ROM I will upgrade with this.
hi mate after you restored your backup did you still have the qtek rom on the phone?
Yes. I get the qtek splash screen when I reboot, and if I go to 'Device Information' I get this:
ROM version: 1.11.00 WWE
ROM date: 03/14/05
Radio version: 1.11.00
Protocol version: 1337.42
ExtROM version: 1.01.128 WWE
Hi
Thanks for the reply how did you do the update was there any error messages that need to be ignored?
Also going to use sprite backup later have you got any tips?
Thanks
Not really - the whole thing was completely painless for me. Just follow the instructions to the letter.
Sprite Backup is great - I get it to automatically backup my PDA to an SD card each night so I always have an up-to-date backup.
Is there a trial version of sprite backup of do I have to buy it?
What instructions did you follow would be good to just do the same as you as it work rather than me stuffing it up.
Thanks
scgf said:
Not really - the whole thing was completely painless for me. Just follow the instructions to the letter.
Sprite Backup is great - I get it to automatically backup my PDA to an SD card each night so I always have an up-to-date backup.
Click to expand...
Click to collapse
cool whats your phone like now? is it any better?
My MDA Compact is really no different after the upgrade - it would be useful to know exactly what should be better. I still can't send files to it using bluetooth.
Last night I re-did the ROM upgrade but this time I reinstalled all my apps and only used Sprite to restore documents etc. rather than the whole system. I think this is a better way forward, although on Sprite's website there is a section on how to correctly use Sprite Backup to restore after a ROM upgrade - have a look at http://tinyurl.com/dhzrp
I downloaded a T-Mobile UK CAB file which adds back all the T-Mobile settings without the garish pink colour scemes.
The instructions I followed are in this thread http://tinyurl.com/863qt - as you work through you will get an idea of what to do. In there somewhere I seem to remember someone posted a simple guide.
I have a qtek s100 rom buymobiles.net or something like that.
I used the program to hack your own rom for Extended storage - made a safe backup first to keep on my PC, just in case, hacked the ROM, flashed it back on the phone and it worked fine. There are a number of error messages that come up, but they're all to be expected, but do follow the instructions carefully and they'll put your mind at ease.
After the flash, you get 27mb of "Storage" instead of the previous 7mb. I've got a 1gig card so it doesn't make much difference to me, but it's useful, and worth doing at the start so you don't have to re-install everything if you do bite the bullet later and apply the hacked ROM.
The hacked ROM will be a copy of your own ROM, so nothing will change ROMwise, however, I foolishly overlooked the fact that that space comes from somewhere, in this case it wipes out the intellidialer and some other gubbins. I had no backup of these, but forunately it's all stored away on the XDA developers FTP. Someone more informed than I can correct me, but I think the only files you really need to reinstall are the intellidialer. Also squirrel out the cab that contains settings for your network, orange, O2 etc (i haven't found these, they're on XDA developers somewhere bu i forgot where! Drop me a line if you find them...)
Once you've done that - well, your phone is pretty much as it originally was, but with a bit more storage for free. not a bad thing.
I would flash the ROM and then reinstall rather than doing a Sprite Backup/Restore, since the registry will be in a very different state after the ROM flash. However, i don't think it'll do any harm.
Sprite Backup is certainly worth getting hold of, and keep a copy of your backup on an SD card and your PC in case your phone gets 'half inched'.
Hope that helps.
Vijay
questions and answer
Try this site for uk gprs network settings
http://www.buymobilephones.net/smartphone_setup.ihtml
Hope this is hat you were after???
also......pls could you tell me .....
what rom version did you use for your upgrade?
how does the phone benefit from upgrading, in terms of "real world" use?
can you upgrade the storage to the stated 20+mb without upgrading the rom version?
can you use any rom from any country from any model and network or do you have to find an exact match eg UK T mob MDA compact?
sorry for the million questions...i have been reading this site for days and have ended up dazed and confused....
riz- there's a tool that will modify any normal rom to the extended rom version.
Extended Rom provides you with a pseudo "Storage Card" called "Storage". if you check the control panel > system > memory > storage you should have about 7mb. Using the extended rom hack, you will hack 27mb, at pretty much no cost to you; this is very useful for storing backups, installation files, photos etc, or anything that you never want to lose, since this space is usable by you, but won't be lost if the phone runs out of battery at any time (unlike the phone's normal memory, that will be wiped if there's a prolonged loss of power). Although using a big SD card is an even better way to do this, it's useful to get teh 27mb for free if it's available i think.
To get the 27mb, find the tool in the upgrading magician forum to hack any rom to bigrom http://forum.xda-developers.com/viewtopic.php?t=22582&highlight=anansky+rom.
Then, use the backup procedure described on that page to copy your own ROM from your phone to your pc. (you'll need an SD card and a card reader to do this). make a backup of that file
Then, use the prog to hack your own rom, then flash it back to your phone. Then your phone will have exactly the same rom as it had before, but better. You will lose some of the guff that was there before, but as i said perviously, this can all be downloaded from XDA forums.
So, I heartily recommended this just for the convenience of being able to store backups etc securely etc..
V
thanks for the very indepth instructions... still a bit scared to try it ...only got the phone yesterday....prob wait another hour or so...he he he
thanks again......
hope that link was useful??
any experience on using dual sim...the type you cut up???
I have finally done the 1.11 upgrade and all working fine thanks for your help. I have also noticed theat 1.12 is out now !!! going to wait for some feeback before trying it.
solarsystems said:
I have finally done the 1.11 upgrade and all working fine thanks for your help. I have also noticed theat 1.12 is out now !!! going to wait for some feeback before trying it.
Click to expand...
Click to collapse
Are there any notable differences between your old rom version and the 1.11.?? I hear the 1.12 has been received with mixed reception…
thanks
Thanks for the cab settings!
Yeah, I guess you might as well patch directly to 1.12, although it's annoying that there's no update history etc to show what's been "improved"!.
I've just bitten the bullet and ordered the ebuyer SD wireless card (£26 delivered, 50% cheaper than ebay!). Hope it's ok, quite worried about it. But, when i did the Big Rom I had this in mind - although my main card is 1gig, obviously I'll have to pop it out to use the sd. so, I can keep essential apps in the 27mb, rather than feeling cramped in 7mb. Makes sense, no?
V
MDA on O2
Hi there,
I have just bought an unlocked MDA compact but can't get it to work on O2!
Can anyone help me?
Cheers,
Evan
I have an unlocked MDA connected to Tesco Mobile (actually uses the O2 network) and it works fine.
What exactly is the problem ?
Stu
Stu,
Thanks for your reply.
The MDA that I have seems to be unlocked as I have it on Orange at the moment, but, when I put my O2 sim card in it just says that there is no service!
Evan
The only thing that springs to mind is that Orange is on a different frequency to O2 so maybe you need to check the network preferences to make sure that it is set to automatic.
Stu
Can I use a backup program to reinstall applications after a rom update. I have tested every rom that came out but manually reinstalled all the apps after rom update. Any help would be great.
Thanks ,
Victoria
That's not a good idea: if the registry structure has been changed, from the previous rom to the new one, when you restore your backup, it can really mess things up!
Thanks for the quick reply. its a pain to do the installs on my jasjar but its double with the O2 exec XDA as well. Best to do it the wright way
I use the Rom upgrade utility from Sprite and it does the job always. No issues yet. Follow the instructions to the letter though..
I use SpbBackup with great results, but like vmiguel said, you shouldn't restore backups between ROM flashes as it restores ALL settings and registry entries, and this aint a good idea unless on the same ROM.
U shld freshly install every app after a clean ROM upgrade as it would also speed up ur device.
i have a question.
All softwares work good for WM5 will work on WM6?
Thanks
lonelyboy2003 said:
i have a question.
All softwares work good for WM5 will work on WM6?
Thanks
Click to expand...
Click to collapse
That depends on the software. Most work well, others require WM6 support.
SPB BAckup... and it is in my folder....
try
Edit:
moved the HOWTO to the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
feel free to update/correct the Wiki if you find failures, bugs or updates
It worked for me - but I cannot guarantee that you don't brick your Touch.
So be warned.
Thanks to dsixda for updating the Wiki for Elfin
MOD EDIT: See this post in case the Wiki is not working:
http://forum.xda-developers.com/showpost.php?p=7662245&postcount=214
Will ruu_signed.nbh be suitable for traditional chinese?
Works perfect for me, now a way to rebuild my os with les software
With this method can someone build a french custumized ROM like the 62MB+ and 4MB PagePool one ?? It will be awesome !! Nice work r0p3!! It's workiiiiiiiiiiiiing !!
Works fine for me, thanks for the good guide
Greetings Denis
Now ... How to modify it ??
P.S : Can I include the extRom when i build the ROM with the OS?
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Noonski said:
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Click to expand...
Click to collapse
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
r0p3 said:
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
Click to expand...
Click to collapse
Can I dump my touch with all installed programs, cooking a complete rom including installed programs?
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
r0p3 said:
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
Click to expand...
Click to collapse
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
eefurt said:
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
Click to expand...
Click to collapse
Here is a trick I have used for quite some times with Sprite Backup 5.1
Sprite Backup version 5.1, version 6.02 is more fancy, 5.1 is good enough.
1. Do a full backup, make sure option Create Self Extract Exec
2. Hard reset (optional)
3. Flash new ROM
4. Run the backup file, make sure the Upgrade Mode Restore Option is Check.
5. Kneel down and pray (optional, or take a cup of coffee).
SKtools is handy.
Step 4 is most important. When it asks you for the upgrade fine, Click None. Minor cleanup unavoidable but heck a lot better than of re-install all the softwares.
Sometimes you may find the machine run slugglish by doing that. I am not sure why.
You may flash the new ROM, re-install all the softwares, see if the machine run faster, but few days later, you will feel it run slugglish. I am not sure why. (The laptop runs runs much faster than once I bought it and take it home and installed with applications.)
So I just keep buying new machines... hahaha
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Thanks for this tutorial.
Now i can safely backup my Dutch rom and test some custom ****..
Regards,
Schmia
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
Click to expand...
Click to collapse
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Noonski said:
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Click to expand...
Click to collapse
Thanks! I'm happy that it worked - nice feeling - eh?
Dumping Elf WM6 Italian version ROM
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
junkyarddog said:
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
Click to expand...
Click to collapse
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
This is usually a .exe file that you can extract with winrar (or winzip maybe)
P.S.: your english is not so bad
r0p3 said:
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
Click to expand...
Click to collapse
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
r0p3 said:
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Thanks! I'm happy that it worked - nice feeling - eh?
Click to expand...
Click to collapse
Pfew thanks, nice knowing this. Iwas allready worried that it would need correct file info.
junkyarddog said:
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
Click to expand...
Click to collapse
Don't upload to XDA. I've seen some directories with full roms on FTP. But this is no longer allowed and files will be deleted.
XDA's allready been in trouble with MS about this. So either use third party file sharing or privatly owned FTP.
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Noonski said:
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Click to expand...
Click to collapse
I don't know yet - I still have to dig in the wiki about that.
It's very dangerous in this area - if you mess up IPL or SPL your baby is usually lost forever. I don't mind about those as long pof's USPL works beautiful.
Radio might be not so critical. But 2.97. is already available - so it would only be for the fun of it
Hi there,
I have another question today where I did not find any anwer to by searching the forum.
I am now about to give the Dr. Gonzo WM61 ROM a try. However in the unlikely case I do not like it I would like to go back to the original WM60 ROM provided by HTC.
As my current installation is heavily customized, is there any way to save the current installation and put it back if required? I mean with all settings, installed software etc.?
Something which I can easily do on a Windows PC by using software like Trueimage oder Ghost.
Is there a way to achieve this with Windows Mobile somehow?
Many thanks already for your thoughts.
Have a nice day
Andi
You can use Sprite Backup program but it is not recomanded to restore settings from one rom to another...
No problem with using sprite backup if you revert to your original rom.
Just reflash it. Install Sprite backup. Restore your backup and everything should be back as it was before flashing 6.1.
However if you keep 6.1, then you are better to re-install all your applications rather than restoring from the backup, unless you are carefull to only restore things that do not conflict with the new version.
Yes, heed the above advice. If you are WM6.0 and upgrading to 6.1 - make a complete and self-extracting backup using Sprite Backup. If you decide you don't like WM6.1, drop back to your original ROM and you can restore your backup to exactly how it was prior to your upgrade.
You can merge specific data from 6.0 to 6.1 however registry entries will not come over properly - which means all you can really restore are SMS and PIM.
EDIT: Double Post
AndiP said:
Hi there,
I have another question today where I did not find any anwer to by searching the forum.
I am now about to give the Dr. Gonzo WM61 ROM a try. However in the unlikely case I do not like it I would like to go back to the original WM60 ROM provided by HTC.
As my current installation is heavily customized, is there any way to save the current installation and put it back if required? I mean with all settings, installed software etc.?
Something which I can easily do on a Windows PC by using software like Trueimage oder Ghost.
Is there a way to achieve this with Windows Mobile somehow?
Many thanks already for your thoughts.
Have a nice day
Andi
Click to expand...
Click to collapse
This can be done by means enabling the r2sd function in the SPL. Unfortunately this is not really user friendly
Many thanks
Hello,
I am overwhelmed of that many answers and just say a big thank you to all who answered.
Will give SpriteBackup a serious try now, maybe also try the "user unfriendly" r2sd function afterwards.
Many many thanks for you, really making this forum a great platform!
BR
Andi
I have upgraded my ROM, and now it is a WM6.1.
My extrom is unlocked now. I have found some files there
that I can not understand what they are!!!
Is there anyone who can help me whit these files, so I can remove not
useful files. The files are:
Default_Imate_PPC_JJ_SA_V5.5.03.cab
Default_PP_CDL_ME_All_Setting_UNI_130171.cab
Default_Signed_SSD_Shortcut_WWE.sa.cab
I have googled a lot but there is nothing.
these are....
akcarash said:
I have upgraded my ROM, and now it is a WM6.1.
My extrom is unlocked now. I have found some files there
that I can not understand what they are!!!
Is there anyone who can help me whit these files, so I can remove not
useful files. The files are:
Default_Imate_PPC_JJ_SA_V5.5.03.cab
Default_PP_CDL_ME_All_Setting_UNI_130171.cab
Default_Signed_SSD_Shortcut_WWE.sa.cab
I have googled a lot but there is nothing.
Click to expand...
Click to collapse
Hi pal!!
These cabs are the result of didn´t formated RAM before upgrade to a cooked ROM, remember that all of original ROM's have a precharged extendedROM, cause you dont erase this extended ROM, it still loading in your new coocked ROM, this extendedROM is necessary in the original ROM for fixing probles and update functions but with the cooked ROM dont works and rest free memory.... Try this:
Format the RAM with mtty.exe, deactivate activesync usb connection and Put the uni in Bootloader before conect your UNI.
Open the mtty.exe and choose USB conection.
Put: task 28 55aa and enter
this will format your UNI's RAM,
Now your uni is Empty, you havent ROM and ExtROM, close the mtty.exe
Dont scare!!! and dont reset the uni, disconect the UNI and connect again,
Upgrade your prefered ROM and thats all. your UNI is free of garbage.
Hi
Thanks for your attention but I have my extended ROM unlocked ( thanks to
ranju's great work) and I can delete these files or simply format my extrom.
The question was that if I delete these files, am I going to have problems after
the next hard reset?
again thanks for your attention...
You will not run into problems at the next hardreset.
But anyway you can save the files somewhere and put them back if needed.
Thanks to all...
If anyone knows what are these files exactly, I will appreciate.
I can upload them if needed.
Thanks in advance..........