One of my friend updated his brand new MDA Compact II with JAMin Rom after unlocking with loki. every thing was OK except camera. So tried to update with K-JAM's Rom again to do camera work, beause he didn't have original charmer's Rom (now I've got it) The process stared normal and did 1% 50% & finally 100% message apeard congratulation as usual. But the device doesn't start, it just blinks. In the other meaning it has dead now. I rquest you all expert brothers to help me to solve his problem. I know if it comes on boot loader again then will be able to update it with original rom. If some body have a solution for me plz help as quickly as possible.
azhar63 said:
One of my friend updated his brand new MDA Compact II with JAMin Rom after unlocking with loki. every thing was OK except camera. So tried to update with K-JAM's Rom again to do camera work, beause he didn't have original charmer's Rom (now I've got it) The process stared normal and did 1% 50% & finally 100% message apeard congratulation as usual. But the device doesn't start, it just blinks. In the other meaning it has dead now. I rquest you all expert brothers to help me to solve his problem. I know if it comes on boot loader again then will be able to update it with original rom. If some body have a solution for me plz e-mail me [email protected]
Click to expand...
Click to collapse
You tried to do what??? :shock:
If you have a Charmer ROM then load that. You should never, ever try to load a ROM from a different device. Guess you found out the hard way.
pls help
@azhar63
do you repair your phone now?i have same problem,the device doesn't start, it just blinks.
pls pls pls someone can help?
think its screwed then. by installing the entire rom package, youve also changed the bootloader. its best in future to extract the OS part of the package and upload that with awizard. I chanced on the kjam os part to see if it could give me an unbranded rom, didnt start up the os, just hung on the splash screen but was able to go back into the bootloader and reinstall the charmer rom.
So What to do dears?
If some body knows any expert's email or contact way, please tell me that i could contact him direct to solve this problem. Some one has told me that there is a bottun inside the device to clear & erase everything to install original rom, is it true??? If so where is it located??
A lot of Talent available but no body helped me yet
Dears forget me not pleas!!!
Help me that I’m looking @ you with hope
Didn't get a solution
plz help me to solve my problem dear my new MDA Compact 2 is dead on my table 2 sad me
Probably your device is dead now, you could try to send it in for repair, and just say "it didnt work anymore" and behave like you dont know sh*t about these Xda's. Maybe you are lucky and get a new one.
Probably your device is dead now, you could try to send it in for repair, and just say "it didnt work anymore" and behave like you dont know sh*t about these Xda's. Maybe you are lucky and get a new one.
thanx but...
thanks to reply & advise, but I can't speak a lie because I belevie in God & the day of judgment. I'll try to repair with your help, wait untill the solution available or have to beleive this loss
Have you looked into this thread , and look at the bootloader method of flashing the rom.
Just to make things clear, are you able to go into the bootloader mode (the screen with multiple colour). Reset the device, and press the power, camera, record button (e.g. all 3 buttons on the side). You should still able to get into bootloader even if you've screwed the bootloader.
FYI, since you've flahsed your ROM, there is not single (or multiple) button that is able to flash your ROM back.
thanx a lot
My dear I'm very thanks to you people to reply me. As I told you my Charmer doesn't come on boot loader so I could do something else. the acatual problem is that boot loader is damaged. I've tried to hard reset & so bring it to boot loader but in vain. What a bad set is this??? that once I got the same problem with I-mat it repaired automatically after a few hours. . so plz help me how can i retrive my boot loader???
:?:
some body help me
Still waiting for help
broken mda compact 2 (charmer)
does any1 know where i can get a new screen and housing for the mda compact 2. i have a berred one that i used to replace my compact 1 (magician) screen and housing. i am uk side london if it helps. any 1 wnat to take it from me for a price pm me. it will work overseas but not uk.
thanks you very much..
I still have compatct II
I still hopeful to help for my MDA Compact II plz help me if some body knows any thing??
It's been a long time but i'm still hopeful
It's been a long time but i'm still hopeful, that somebody will help me to repaire my MDA Compact II.
Plz help me to repaire my MDA Compact II
after wrong rom it has dead. Now plz dears help me. It just blinks. No boot loader is available.
Related
Hello, I hope to help me someone can. I implemented a while ago the t-mobile update on my MDA compact. Everything ran marvelously, until the MDA started again and remains in the Bootloader hanging. (in the display USB V stands 1.00) I have already tried with the nipple trick behind the Akkudeckel. Then Bootet it also, but if it starts again again, it remains hanging again in the Booteloader. I do not continue to know genuinly. I have also no Backup on SD Card. What am I to do? Thanks for your assistance.
Nexus404
Yehaaaa....
I have installed the last update from the T-Mobile Germany homepage. The Update was successfully
For the future I know, NEVER CHANGE A RUNNING SYSTEM
Thanks
waiting for reply too
Hello, I have a HTC TyTn, and I am trying to upgrade it from wm 5.0 to wm 6.0, I have followed all the instructions, but it still dosent work, I think the problem is, that I dont have SPL-1.11, I have a lower one, PLEASE HELP ME!
This contains a lot of guides for Hermes:
http://forum.xda-developers.com/showthread.php?t=299462
This is a hard-spl thread by olipro.. you can follow the instructions there.
http://forum.xda-developers.com/showthread.php?t=296722
Thanks,Ill have a look!
if it is an official rom you won't need hard spl (just a heads up to save some time flashing)
It is original, but the htc eclub, dosent have any more upgrades for the htc tytn.
I did everything, but then it showed me
ERROR (260) : Update Error
The Update Utillity cannot connect to your PDA phone!
BUT MY PHONE WAS CONNECTED TO USB!!!!
PLEASE HELP ASAP!
When the multi tri thing appears, it shows
HERM200
IPL-SSPL by Des
HERM200
SPL-1.07.ds
WHATS WRONG?
Hello everyone, I would like to recover my present rom Traditional Taiwanese officials rom, I try to download the official rom brush back to the official version, can see into the tri-color screen (hard spl) can not be restored to ask how to recover spl3.29 0000 .Thanks
you can go to kaser wiki to take a look ,it seems I have seen there ,Im using my phone now so I cannt give you the link ,im sorry ,but I got two htc Chinese traditional stock roms if you need .
bty 哥们，哈哈，有事说话！
兄弟加我——717429504
Reverting back to the AT&T or HTC ROM and SPL for Warranty or return
If not what your after i'm sure you will find via taking some time to read the STICKY & WIKI
On that note thread closed.
i need help to flash wm 6.5 rom i've downloaded from here
can anyone one tell me how to do it in simple steps?
i don't know anything about roms
i didn't do any upgrade to my htc s710 device before
last thing my device has sim protection (sim unlocked)
thanks
first:
follow steps here:
USPL
second: download the rom you wish to use and install it same way as you installed hardspl!
3. finish!
thank you hashtowent i did as u said
and i finally got wm6.5 in my vox
and thanks to everyone here on this forum
i learned alot here about my vox
thank you
Hi Hashtowent,
Any idea why I am still stuck with ERROR 270 only with the WM6.5 in my E650? (I also followed your links and suggestions)
THX
Ant
Hi,
I tried today to update my VOX in rom WM 6.5 but I have the same problem as Antanico...
Someone can help me ppllleeeaaasseeeeee ???
Many thanks
No ?? Pleasseeee
I tried to follow all steps in USPL guide but still the same....
I have for now the ROM WM 6.1 from LeFab47 alias Fireburned
Guys... I had the same problem in my new VOX...(didnt have this issue in the older one)....
Jockey was considerate enough to point the following to me...... Used it and everything was absolutely fine....No error 270 etc...
There is one alternative to application unlock your phone. To properly application unlock the phone perform the steps as suggested to me by another friendly customer:
1. go to
http://www.modaco.com/index.php?s=&s...dpost&p=825304
2.Run MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB on the device
3. Run MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device and
reboot.
This will solve your problem...if it doesnt....lemme know ..
thanxxx
Hi,
Many thanks for your answer but but but after run the 2.cab I still have the same result ;(
Whhhyyyyy mmeeeeeeeee !!!!
Just te be sure, i must follow steps in this order right ?
1°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
2°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device
3°) Restart
4°) Launch uspl_116_jockyw.bat
5°) Update ROM with "vox-USPL"
6°) Update ROM with custom ROM
???
after step 3...
try running the application unlock sda...
maybe will solve your problem
if it doesnt.....i will let you know another solution
thanx
.....same.....
Is it normal that at the end of step 4 I have the sceen with the tux after screen green, red,... and after nothing happend I must reboot the phone myself ??
All is OK nowwwwwww.
Like a newbie after step 4 I shut the phone instead of launch directly step 5.....
Thank you Indtram for your help
hi, i can't upgrade to windows mobile 6.5 because "error 270".
And when i launch the uspl, my vox shutdown and i restart it but nothing.
What have i to do?
thx
please read the complete thread and you will have the answer to ERROR 270....
hello
i have bougth a htc s710 which i wont to have a new windows on... wat most i do?. it is a risk?
It's no risk, do USPL as described in the sticky (or the Wiki) and then flash any ROM you want (for the S710 of course)
thank you very much
this was a good solution to this damn error
thank you very moch
Dr. Ahmed Zaher
Hi Mathitalia,
It is over 1 year from the issues we had.
Can you please tell me if your phone is working with Italian SIM cards?
Did you manage to SIM unlock it?
All the best,
Antanico
Hey guys Ima need your help here:
Yesterday I was updating my Samsung Omnia 7, it has Mango installed but SFR-FR made a new OEM update available with improved firmware and bootloader. So I changed my carrier from 000-88 to SFR-FR, and started updating. From here everything went wrong: error codes floating around, workarounds wouldn't work either, so I thought: let's take a fresh start.
I flashed a UK retail rom (pre-NoDo or something), updated my device to Mango, did the same as I did above and now I was able to install the update successfully. But since everything went wrong, I am stuck with one problem: I have no service, or just service for a few seconds.
With my SIM card is nothing wrong, tried it out in other devices. So I guess it has to do with those updates: maybe one screwed up my firmware a bit? I have no clue. It probably doesn't have anything to do with the hardware, I didn't drop the phone or anything else.
I hope you guys have any idea to see what causes this problem, maybe I can do some tests from the Diagnosis app? Maybe there is a registery value that I need to check? Help is really appreciated