Hello everyone,
I have a big challenge for the experts of upgrade process.
I have tried to upgrade my S100 with a French ROM (EXE method) and the upgrade stopped at 76% while CE upgrading. Since, I had to remove USB cable.
Now my PDA is off. Impossible to turn it on. Even hard reset keeps the screen black.
I have tried to run the upgrade tool again but no info are detected and the soft gives me the following result :
"ERROR 150 ROM UPGRADE UTILITY ERROR"
Does someone know about a way for revival my Phone?
I thank you in advance for your support.
Laurent
:-( Tried the bootloader (camera & power & sof-reset pressed together till it reads 'serial v1.xx')? If this works connect USB & restart the upgrade.
M
I knew that some genius live on this Forum
I didn't but I just did and it worked fantastic.
Thank you so much for this info unknown to me. Very precious.
Thank, thank and thank you again.
Laurent :lol: :lol: :lol:
Related
Hi All
I have received a Mini O2 XDA for language change from German to English. Going through the Forums I finally got downloded English Rom.After updating the Phone started to vibrate continously.Now the phone refuses to switch on.When I connect the USB cable ,only red light is seen on the earphone part. I cannot flash also with any other version as the USB does not detects the Phone.
Pls somebody give me a detailed explanation on how to revive the Phone.
Best Regards
Supremegsm
Try to get it into Bootloader: press power & camera & softreset all together & wait till the screen reads 'serial v1.xx'. No backlight so hard to read. If this works, connect usb & flash again with an exe file.
Doesn't sound any good that red led, did you charge it fully?
M
Thank you for your early reply.
I can now get into Boot mode and can read USB V1.02.But sir can you pls tell me where can I download the compatible ROM version .
Battery is fully Charged.
http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
or visit the wiki, link on top of the page, & go to the magician section.
Succes, M
Ok.will try and post results here.
Thks & Rgds
No prob, no fun at all killing your device. Or worse from a bloke who's much taller.
Thank you very much for your solution.Now I can switch on the phone and everything seems to be working perfect. Only one thing when that I have loaded phone rom with i-mate.IS there a way I can load O2 Rom or pls give link where I can download O2 XDA II mini ROM.
Thanks & Rgds
Supremegsm
Take a look overhere ftp://xda:[email protected]/Magician/Extended_Roms/ it contains several O2 branding ext-roms in different languages. Just put the desired cab-files on your storage card & execute them to install. Might be that you want to hard-reset first & skip the I-mate ext-rom from executing by a soft-reset just after the initialization ended (press screen to begin using your device).
Cheers, M
I own an MDA compact on t-mobile uk,
whilst on there homepage i saw a "update your MDA software"alert,
i downloaded the software and ran it.
the MDA then went off and when turned back ran a hard reset.
the MDA then runs thru the set up,when thats complete is shows a grey type screen with serail v1.02
its frozen on this screen and unuseable any effort to do anything makes a repeat cycle of the above
please help me turn my paperweight back into a pda
thank you very much
(i think im best sticking to a standard phone from here on in,im not techy enuff to have a pda.doh!)
ur just in bootloader..go read wiki
u gotta press the reset,power and record camera btton together..thats wot i do for my 9090
thank you very much for your help
its appreciated .
ill try that
thanks again friend.
Jace,
the power & camera & soft-reset button will bring you in bootloader, just where you're now.
You'd better connect USB & run the update again. Something got broke the previous time, that's why you're in bootloader now.
Regards, M
brill guys ta
only problem(sorry guys still learning)from the bootload screen the pc wont see the device is connected and if i try to run the device to get to a standard screen to sync it just reboots?
how do i actisync while in bootloader?
ta
Jace pls don't try Act.sync. Run the update again :!:
ive manged to get the pc to see the pda and ran it under a guest partnership,
once it had seent he pda, i re-ran the update,but each time it goes thru the motions then gives and error msg.
man im goin back to a normal handset next time
What rom nr are you flashing? & what's the error message?
Cheers, M
Thanks for all your help sorry to be such a pain.
i got the file from the tmobile uk site .
file name ma-tmuk-11300-128-11200
when connectiong its says
updating from
device ce image:1.13.00
device ext imagethis is blank)
deivce radio:1.12.00
up dating to
device ce image:1.13.00
device ext image:1.13.128
deivce radio:1.12.00
it runs thru then stops and says
error 101:connection error
thanks
when booting up the bottom right shows
R 1.12.00
G t1337.42
D 1.13.00wwe
Ok that's the 1.13WWE rom, which is available sine october last year. Should be a normal rom without problems. If you never updated before & still in your warranty period, return your device.
BTW have you rebooted your PC during your sequence off tries?
Guess your no pain, but you got bad luck in upgrading this time. You did the right steps to cure everything.
Cheers, M
great thanks,
i have rebooted pc but ill do that then retry nothign to loose at this stage thanks mate
Did you ever make a rom-dump of your working device? Otherwise you can try to make one now & do a SD-update.
Cheers, M
no i didnt mate doh
ta for all your help mate appricated
Hi everyone,
Help Please!!!!!
I have a Dopod 818pro that was unlocked and was working ok, but I wanted better performance, so I tried to upgrade the ROM to AKU3.3.13.ASERG-us. It looked like it worked oK, but after the recommended hard reset, I get the "HTC Innovation" screen and then it freezes on the black screen shows the below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
"Dopod Enjoy Mobility" and then it disconnects from the PC.
When I connect it to USB and do a hard reset the PC recognizes it when the HTC Innovation screen comes, but then disconnects from the PC. So essentially, I am not even able to connect to PC to reinstall my original ROM (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe).
I would very much appreciate if any one can suggest a solution to reinstall my original ROM software...
Thanks in advance for advice...
Brenda
Hello,
Try pressing the camera button (hold on to it) and press RESET. You should be in bootloader mode now and the PC should be able to recognize the USB connection. If this works, try upgrading with the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe you mentioned. It should work.
Omg, i used too many "shoulds"... anyway it SHOULD work indeed
Oh..Thank You ....Thank You... it worked....
Hello Namco,
Thank You, Thank You.....I thought I fried the phone....your suggestion worked like a charm...
Thanks Again.
Brenda
Glad it worked
Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
Hello,sorry I'm not too expert, but I've tried to upgrade my qtek 2020 from windows mobile 2003 to WM5 following instructions that i've found on this site, but I've got a big problem. When himaupgradeut_noID start after some minutes it gives me the following message: Error 101: connection error.
My qtek 2020 remain with the Serial (when it is out of the cradle) or -- USB (when it is on the cradle) black screen (v 1.06) and nothing happens... I've tried to reset it pressing the power and reset button but it remains on the same black screen!!
Please help me what could be the problem? What should I do? It seems to be a communication problem with the usb but before starting the upgrade Active sync was running ...
Thank you for your help
imate phone edition upgrade for model ph10b
Hello, i have an imate ppc (the phone edition),,,i cant find an upgarde for my ppc,,, can anybobody help me pls...i tried the upgrade for xdaII that i got from this site.... but it does not work when i installed it ,,,,i would appreciate it if somebody could give me a guide to where to find the upgrade download for my ppc...the only program that work for my ppc is the pointui home,,,,,i also tried to install a phone pad,,,and it didnt work as well....it is sometimes difficult to do a text msg,,,,with the keybord... specially if i am on my way to work,,,,
please help me to upgrade my imate phone edition,,,,
thank you for your help...
any guide I could give would only be a directly
copy paste of the readme in the zip file with the rom upgrades
wm5 wm6 wm6.1 same deal same readme