Database Info

VOIP software hangs phone

Hi,
I bought the Excalibur and the Vox 'cause I though it would have been great being able to place VOIP calls from my phone, using the same setup I use with my ATA.
The files to enable VOIP and MS phones have been circulating since a while, but even though I tried couple of packages I still have some issues.
The problem I have is that, for some strange reason, when the VOIP cab is installed my phone sometimes loses "Calling and receiving" capability.
Sometimes I trie to place a phone call and the phone hangs, I can only switch it off and on again. Sometimes I even have to remove the SD card otherwise it will keep doing a Reboot Loop.
Other times I receive an SMS for a missed call, as if I had been offline. When I then try to call back my phone hangs.
This bug seems to affect only the Calls and not the SMS functionality.
Has anybody experienced the same issue?
Thanks,
Ka.

I also have the same problems except for the SD rebooting.
I installed the VOIP client from the workarround posted here and I also experience the same problems:
1) phone seems to work fine until I decide to place a call, when I finish entering the numbers and I hit the Call button, the phone does nothing (not even the beep) and from that point I know that I can't place calls (dial pad doesn't even works on home screen). I have to reboot.
2) I receive SMS from missed incoming calls. If I call my S710 from another phone I get a calling tone and then the answering service, but the S710 does nothing.
I had email accounts configured and I thought this problem was from GPRS not letting GSM calls come in (as it says in other threads) but now I have no active email accounts, no GPRS traffic and it is ever worst (3 to 4 reboots a day!)
I honestly don't remember this problem before VOIP client installed.
Anyone has this simptoms???

I do have the same probs
Probably others aren't experiencing the same because they disable the VOIP when no Wifi is available. I'll try to reinstall the VOIP Cab and try that way.
Bought the S710 for it's VOIP cababilities and possibility to hook it to my PBX and finally feel the freedom of VOIP (Ok, bit exagerating but you get my point ).
Anyway, since we're two at the moment, promised to keep you posted.
Thanks for your help.
Ka.

kast did you improve your VoIP configuration tool? I once tried it, but it never worked. I gave you feedback in another thread but never heard of you

same probs too

jockyw2001 said:
kast did you improve your VoIP configuration tool? I once tried it, but it never worked. I gave you feedback in another thread but never heard of you
Click to expand...
Click to collapse
Hi there,
sorry for taking so much time. Actually been quite busy lately and well, ok, must admin left this VOIP thing a bit aside.
Anyway, would you mind trying this version, hope it will work a bit better.
Tested with the provider you sent me and it seems to work.
(This is not a Cab Install thing, been packed up in couple of minutes, please unzip it and run it from your mobile.)
I think I'll get back to this so stay tuned for some little enhancements.
Ka.

COOOL.....Works on my modded Tornado with wm06...great!!!!Thanks!!!!

Hello Kast,
After my last post, I unistalled the VOIP software from within the phone's start>Settings>Remove Programs>Sleuth's WM6VoIP
I got this message "Sleuth's WM6VoIP was not completly removed. Do you want to remove it from the list of installed programs?", I didn't remove it.
I then changed the Settings>phone>Internet Calling>"Use Internet Calling" to "Never".
Since then I haven't experienced any troubles at all and I haven't rebooted the phone for some days now! problem solved but no VoIP!
I'll try your VoIP files and see what happends.
Cheers
P.S. My setting for VoIP was "whenever available" but i had WiFi off 99% of the day. (some days even 100%).

Can't receive incoming calls

Hi there, I am using VJgrace latest 3.4 ROM, I realized that nowadays, sometimes I would not be able to receive incoming calls, my friends and relatives have complained that I do not pick up their calls, they even showed me the proof of their call logs. They said there were dialing tone. So one day, I tried for myself and true enough, at times, the phone will just light up from idle, but it will not say that there is an incoming calls. When this happen, I cannot make outgoing calls as well, when I try to dial someone, it just hang there.
Any solution? Is this a radio or ROM problem?
I have run the GSM update

I faced the same problem too. I thought my friends were joking. just called myself to confirm. true enough the phone lights up for a second or two then it goes back to sleep.
this is serious. am thinking of going back to WM 5

Really? Wow. That's a new one. I guess I haven't seen this. illi - would you really go *all* the way back to WM5? Are you saying this is a problem in every WM6 ROM you have installed? I'm surprised... I've never seen it on my phone. But I don't get too many calls during the day. And I reboot my phone every 2 or 3 days just for good measure.

bipinsen said:
Really? Wow. That's a new one. I guess I haven't seen this. illi - would you really go *all* the way back to WM5? Are you saying this is a problem in every WM6 ROM you have installed? I'm surprised... I've never seen it on my phone. But I don't get too many calls during the day. And I reboot my phone every 2 or 3 days just for good measure.
Click to expand...
Click to collapse
i cant afford to loose calls. some friends had complained since a few months back. so i suspect its all WM6 ROMs not just vj's.
i think it happened when the device is syncing because i receive lots of emails. so at that time the gprs/edge is being use. THIS IS MY WILD GUESS ONLY!! I noticed it (the device awakes then back to sleep) once while on active sync and at that moment emails were being downloaded from my email server.
How can yew trouble shoot this problem?

illi said:
i cant afford to loose calls. some friends had complained since a few months back. so i suspect its all WM6 ROMs not just vj's.
i think it happened when the device is syncing because i receive lots of emails. so at that time the gprs/edge is being use. THIS IS MY WILD GUESS ONLY!! I noticed it (the device awakes then back to sleep) once while on active sync and at that moment emails were being downloaded from my email server.
How can yew trouble shoot this problem?
Click to expand...
Click to collapse
Do you have this checkbox selected? I'm not sure if it makes a difference, but it's one thing I saw.

bipinsen said:
Do you have this checkbox selected? I'm not sure if it makes a difference, but it's one thing I saw.
Click to expand...
Click to collapse
not too sure but will check next time i active sync. anyway i rarely sync with my pc so i doubt thats the problem - i noticed once while hooked to pc the phone awakens and then sleep. i use mail2web.com's microsoft exchange to sync my emails. i active sync only to do spring cleaning on my device and SD.
if karhoe subscribe to the same telco as me than i suspect its the operator. (hello karhoe you there;-))

I have this problem even when the phone is not connected to Active Sync, when i'm outside. The phone just light up, and then poof, gone. Well, I am using DiGi telco. But I don't have this problem when using Andot's PEE, don't have it when using 3.0 ROM, only recently when I started using 3.1, had this problem, after so long, then use 3.4, still have it

I had this issue with WM5.. now with WM6 I didn't found (yet) this issue. (using EA ROM)
This is a quote of one of my posts (Oct 7 2006, 18:43, modaco):
i think this is a software issue..
i have a spv c600 and have problem with the telephony part (and many other spv c600 users)
1. some times when somebody is calling me the phone does not announce in any way that i have a call.
2. other times when somebody is calling me the phone send automatically a busy tone to the caller and again does not announce me that somebody has called me.
3. and other times when somebody is calling me, the caller is announced by the robot that 'the user is in an uncovered area or has the phone turned off' or it divert it to voice mail (if the WM user has voice mail active. i have it off)
however, point 1 and 2 can be 'detected' by eye on call (phonesharpen). only detected (no answer, no nothing).
- in the first case, a window with caller information is displayed as long as the caller is calling you.
- in the second case, a window appears and disparears extremly fast
to bad that the phonesharpen does not log the detected calls . i have mailed them about this, but on answer..
i gues the problem is the native telephone application
so .. in conclusion WM smartphones are not recommended for people who want to use them as a phone.. who knows what important calls you miss.. i hope this will be fixed someday
Click to expand...
Click to collapse
@karhoe you should tell this to NiTroGeN and to VJgrace

Gentlemen, I suspect this issue is somehow connected to currently selected homescreen. I had this issue on WM6 build 18120 homescreen with VOIP plugin, but when I chose another one not containing VOIP info, this issue has gone

ega2oo2 said:
Gentlemen, I suspect this issue is somehow connected to currently selected homescreen. I had this issue on WM6 build 18120 homescreen with VOIP plugin, but when I chose another one not containing VOIP info, this issue has gone
Click to expand...
Click to collapse
I tend to believe that it is caused by either of these problems:
1 - the telco (I'm subscribing to the same telco as karhoe)
2 - the voip plugin on the Homescreen
This is what I'll do: I shall deactivate the voip plugin. But I cant afford to unsubscribe from my current telco; it offers the cheapest unlimited data plan. LOL!!

I have a feeling that it is related to VOIP, I did configure my VoIP using the xml method, and then I also installed the VoIP fix button for communication manager. Now im using HTC Home screen and so far, so good

Using a phone through my pc

I didnt really know where to put this, but here goes anyway
I have a HTC S710 with a broken screen. Im currently using it through MyMobiler, but this is really slow and then theres a number of smaller problems with it too.
I was wondering if there was any program which means you can use the resources avaliable on my phone, sms, calls etc, through my pc. Maybe a faster program similar to mymobiler. I think it would be great if it showed a popup when there was a text or an incoming call?
I have searched and not come up with anything usefull.
also, another thing i want to know is if there is any way to make my phone turn on speakerphone automatically upon answering a call?
Thanks, Cris

There are a few diffrenet apps available, but MyMobiler is the best, especially since it's free. There is an app here as well for turning on the speaker during an incoming call as well.
Just a question though, why wouldn't get a replacement device. Seems odd to only control it through your PC.

well, i dont want to replace it simply because im a student, therefore i cant really afford it. Secondly i just like this phone, so it seems a waste to not use it at all any more when it still functions as a phone even if i cant see whos calling.
There is an app here as well for turning on the speaker during an incoming call as well.
Click to expand...
Click to collapse
I dont suppose you have a link to this app do you?

SpeakerPhone v1.05 (cab attached) when an incoming call is received, the speakerphone of your device will automatically turn ON when you receive a call.
Here is the LINK for further info...

thanks
thank you reaper

I760 chaos.

I didn't know where to put this, didnt found any i760 dedicated section, if im wrong relocate me please.
the thing is I got my i760 a couple weeks ago and after a lot of struggling i managed to make it work on my local network. At first when i dialed a number it made this strange sound and hanged up the call after 3 seconds, no txt messages or incoming call at all.
Then i just left to rest (i guess thats all i did) and on the next morning it was working just fine, incoming and outgoing calls, texts, everything. So i had the magnificent idea of having a hard reset. Now my phone wont work at all, same problem as before, the only difference is that now when i call to it, the phone rings but then hangs after a second even if try to pick it up.
Its WM 6.1, its not on flight mode cause of the signal, im on a covered area, it connects to wifi just fine, i just ran out of ideas.

Welcome to forums
As we dedicate only to HTC devices you won´t find too much attention or a dedicated section.

Worry not friend, I managed to get it to work again. Feel free to close this. Thanks for the reply.

HTC (AT&T) FUZE BT earpiece issues

I re-downloaded the new ROM for the FUZE. The first time, I noticed the change in the phone with the slider added but it became painfully obvious that my earpieces ( motorolas HS850 AND S9-HD ) don't pick up (hands-free) anymore. I have to slide the bar and hopeit pics up - that takes a few seconds also.
Seems like this second time has put some pieces I guess were missing but the BT ear piece stuff is still an issue.
I wish they never got rid of the app. I used to call hands free on the 8125. Can't stand Voice Command never gets my calls correct so I just keep it disabled. At least with the other app. I could go to each contact and "train" it to respond - had hiccups but at least it worked more than not.
I've used Andrea F's weatherdatabase to add cities to my accuweather app. on the touchflo 3D. So i'm wondering is there anything I can do about the above.
I'm running Windows Mobile 6.1 Professional.
HTC say that they are getting lots of calls on this but for now nothingas far as a fix.
Any help with the BT issue or even voice command would be greatly appreciated.
Thanks T.

Moved as not ROM Development.