Hi all,
I have just bought a tomtom bluetooth gps system, I can bond to the gps receiver ok, but it just wn't connect. There is deffinately a connection during the bonding process but that is it, it never connects again.
Any help would be greatly appreciated.
Thanks
Steve
If its anything like the EMTAC then it needs to be considered as a serial port...
Have you tried changing the connection settings in the GPS icon? Default prob to Com1, so try changing.
I can't remember the options 'cos I haven't got it installed myself until later today - but using an EMTAC obviously
Puff The Magic Wagon! said:
If its anything like the EMTAC then it needs to be considered as a serial port...
Have you tried changing the connection settings in the GPS icon? Default prob to Com1, so try changing.
I can't remember the options 'cos I haven't got it installed myself until later today - but using an EMTAC obviously
Click to expand...
Click to collapse
I think the problem is that the xdaII doesn't support a bluetooth serial port profile. I have tried virtually everything and had no luck.
Please keep me posted on how you get on, I really hope we can get this sorted or I will have a gps reciever paper weight.
Steve
Hmm
Due to the nature of yesterday, it wasn't until midnight (GMT) that I could get to have a play with my XDA II & EMTAC BTGPS (& I wasn't sober )
Installed TTN2 and tried to connect - not a sauasage
There "seems" to be something using COM6 and as such TTN2 can't use that as the path to the EMTAC - check box in the GPS options won't check. Turn off BT & you can check the box, but it won't connect as something else obviously can't use it either :? Dunno - I'm not a programmer but I'm going to have to check this out.
I'll speak to a contact @ EMTAC & see if they have been sucessful in bonding to an XDA II (HTC2?) & if so how. Otherwise I'll keep on playing with it & see what I can find out.
Anyone else got any tips or ideas what might be the way of resolving this?
Have you tried turning off the "receive incoming beams" under settings/connections, that may or may not free up the first com port.
I know someone with the same problem. O2 have told him that Tom Tom are working on a new version of software to fix this specific issue and it will be downloadable from the TT site. They couldn't say when.
xdaguru
Beam off did seem to allow me to connect to COM6 but not for my device Might be worth trying Steve because TT Wireless was one I could connect to.
IIRC from iPaq Bluetooth Manager, you had to bring up the device options once bonded and then select a serial connection. Pocket Loox as well. The BT Manager in the XDA II is very basic. So I do wonder if its a TT soluble solution or does it need an upgrade to the BT Manager?
If its a problem soluble by TT then I'm prehaps more hopeful
Sorry to go off topic but I wonder if this is the same PTMW that I know?
How you doin m8?
Hello Danny
Yes it is I
Can't be that many PTMW!'s about
All's well & I'll catch you on the other side one day
Yeah I guessed there could be only one PTMW
I take it you're lucky enough to have an XDA2 already? I always knew u were a gaget fan like myself. I have a month left on my XDA1 contract
Hopefully Tom Tom will have the problem ironed out by then as I have TTN2 aswell.
Pay us a vist on Scoobycity soon. Alots changed and we're alot bigger now
Any bluetooth GPS working with the XDA2 ??
Is there anyone who got the XDA2 working with a bluetooth GPS ? I am very eager to get one (both the XDA2 and a bluetooth GPS) but I would like to hear from some who got a combination working .
Thanks,
Marco
Its being looked into Marco
It may be that the BT Manager may not have various BT options enabled, so it may need a software update/patch from O2.
Spoke to O2 this morning.
They are "aware that not everything works with BT" and are working on a software update.
No timescale offered
I have an Emtac and was going to buy the XDAii to replace my Loox but without this bluetooth connectivity I will save my money. However interestingly it does say on the XDA website...
...or use TomTom Bluetooth with Xda II and cut down the amount of wires in your car
Click to expand...
Click to collapse
I'd say this is enough to get a refund if you want one. Page in question is located here...
http://www.my-xda.com/gps.html
TomTom and Bluetooth
The fault with the TomTom software and Bluetooth lies solely in TomTom's software. TomTom have recognised this and are aggresively working to fix the problem.
The TomTom GPS software doesn't know to read the details of the virtual com port. So give them some time to fix the problem....
Where did this info come from? do you have a link? I had heard that it was to do with the Bluetooth GPS itself not the TomTom software? If you're in the know, could you do a little expaining for a half-wit like me?
Hi
I too have just upgraded to the XDA II from the Ipaq 3970, and I also have an Emtac BTGPS.
Speaking to O2 it appears they used to support the TomTom BTGPS but do not any more.
It would be very interesting to find out if any one has a TomTom BTGPS and can serial link it to the XDA II
Dom
TomTom and Bluetooth
mother said:
Where did this info come from? do you have a link? I had heard that it was to do with the Bluetooth GPS itself not the TomTom software? If you're in the know, could you do a little expaining for a half-wit like me?
Click to expand...
Click to collapse
The fact you're able to bond with the unit shows that bluetooth is working correctly.
The issue is that the tomtom software can't read com6: (which is where bt is hiding) or do anything with it, because of the way the software works.
This is because the Bluetooth manager on Xda II is from MICROSOFT, whereas on other devices it's manufacturer specific. As far as I know this is the first ever deployment of the MS Bluetooth stack directly.
Speaking to O2 it appears they used to support the TomTom BTGPS but do not any more.
Click to expand...
Click to collapse
Then why do they say they support TomTom on their website? Seems like a few people at O2 dont really know what's going on?
I've not known that O2 has ever supported EMTAC BTGPS 'cos the XDA (1) didn't have bluetooth support :?
Surely it is the BT manager that is at fault? Not allowing the a serial connection from the manager to the Emtac?
TomTom is looking to read Com6 (when told to) but the info its getting is not sufficient or mapable.
I've run BTGPS with a TDK B/tooth card and it needs to be told (as do other managers) to make a serial connection to the BT device.
Test for someone (I'll try & do it too)
Find an alternate mapping software that *should* accept a BTGPS device & try to connect...
I cannot start using my navi kit for many days because of one problem: I leave BT GPS receiver outside for at least 20 hrs to initialise, connect to device regularly, run NAVIGON and get always the same message - "A GPS receiver has been detected, but a convinient GPS signal is not available. The reception is obstructed, or the receiver is being initialised."
Any idea what to do?
Slaven, it could be a faulty receiver, do you have a program for viewing the signal and number of sats being received? It maybe also that the settings are wrong for the gps, what is the model of receiver you are using and details please of how you set it up when bonding etc. Have you carried out a factory reset of the receiver also? One other thing, sometimes a gps reciver will work much better for initialising first time if it is mobile rather than static, put it in the car and see if you have any results after a mile or 2. Try this program to test the gps function.
Please check your PM I have sent one to you. thanks.
I`m using BT GPS receiver delivered in original kit with Navigon 4 (made by GNS). I`ve bonded them regularly (XDA II asked for code and I entered 0000 - as described in operation manual). I have not performed factory reset of GPS rec. because don`t know how to do that. I couldn`t find any possible way to do that, except to remove BT and TMC moduls and I have done so.
Thank`s for gpsdiag, but I don`t know hoe to connect BT GPS with my notebook (with built in BT) to test it. Only service available is to connect it to serial port, but couldn`t. As you can conclude, I`m not very experienced with this, so I need really DETAILED help! Thank`s in advance.
Sorry, I sent the wrong version of diag, I will pm you the proper file.
The BT version of serail port on qtek is not compatible with wildcomm BT (used by navigon) got to navigon website and download the wildcomm patch
this will solve your problem
I was using navigon with wired gps and then tried bluetooth which dropped signal and refused to reconnect, thanks for the link I will try it.
Is there someone in the forum who can help me with a problem with bluetooth. I have an acer n50 premium with Windows Mobile 2003 SE and Bluetooth 1.7.0 Build 1903 by Broadcom. I have a big problem with my GPS Receiver Royaltek RBT-2010 and my ppc. I loose the connection between my ppc and my gps receiver very often. I have installed the latest Rom for my ppc and I have changed the gps receiver, but it is impossible to use TomTom Navigator 6. I tried GPSGate with a virtual port. The connection with gpsgate and the receiver is ok, but no incoming data or service unavailable. I have called the hotline of acer, but no help. Is there any possibiliy to upgrade the bluetooth driver on my acer or any other idea. Excuse me that I contact you, but I hope that you can help me. Thank you for your time.
Nobody can help me?
I think that there could be a possibility. With a old update of TomTOm GPS 3.07
Don't work. Nobody of the experts can help me?
Maybe the bluetooth receiver is too far away from your acer?
Hi All....
I have just installed TomTom for my phone, installed perfect, however i am having problems getting a GPS Signal (minor issue!)
I have 4 options of GPS receiver when i set the software up, two are bluetooth ones and two are wired ones. However, am i right in thinking that the xda serra (htc touch pro basically) has a gps receiver built in?
Can anyone point me in the right direction...I have set the baud rate to 4800 (default?) and told the tomtom software and the phone to use COM4.
Thanks in advance..
dan_1983 said:
Hi All....
I have just installed TomTom for my phone, installed perfect, however i am having problems getting a GPS Signal (minor issue!)
I have 4 options of GPS receiver when i set the software up, two are bluetooth ones and two are wired ones. However, am i right in thinking that the xda serra (htc touch pro basically) has a gps receiver built in?
Can anyone point me in the right direction...I have set the baud rate to 4800 (default?) and told the tomtom software and the phone to use COM4.
Thanks in advance..
Click to expand...
Click to collapse
Welcome
Try to READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael
Hope it helps
Fuze
I had same problem with my Fuze (Touch Pro). What I did was disable aGPS (it is in your settings-system-AGPS, both tabs set to disable) Baud rate was set at 38400 and com port 4.
I also tried to use Bluetooth GPS receiver and I got an option on Tomtom to use built-in GPS receiver. After that - no problems. I read quite a bit on xda-developers about it and have not seen anything as simple - reflashing radio etc - sounds to invasive with a risk of turning a nice neew phone into paperweight.
settings-system-AGPS
The XDA Serra does not have the above settings option, is there a cab file available that can be installed to allow you to turn off agps
Hi, I own an HTC UNIVERSAL with windows mobile 5.0 original rom and I use to play on it tomtom navigator using an external gps via bluetooth. I would like to know if it is possible to connect also an handsfree so I can answer calling meanwhile driving. Is it possible or it made conflict?
Thanks in advance
I used to have a HTC Wizard and used it with Bluetooth Carkit and GPS Mouse at the same time. It was also running WM5.0, so your Universal should be able to do it also!
Thank you...I will buy an handsfree then.
I bought handsfree and get paired. But when I start external gps it request me to pair and when I pair it disconnect the handsfree. Please can you help with some fix.
It is an HTC Universal win mobile 5.0