Hi all,
I have just bought a tomtom bluetooth gps system, I can bond to the gps receiver ok, but it just wn't connect. There is deffinately a connection during the bonding process but that is it, it never connects again.
Any help would be greatly appreciated.
Thanks
Steve
If its anything like the EMTAC then it needs to be considered as a serial port...
Have you tried changing the connection settings in the GPS icon? Default prob to Com1, so try changing.
I can't remember the options 'cos I haven't got it installed myself until later today - but using an EMTAC obviously
Puff The Magic Wagon! said:
If its anything like the EMTAC then it needs to be considered as a serial port...
Have you tried changing the connection settings in the GPS icon? Default prob to Com1, so try changing.
I can't remember the options 'cos I haven't got it installed myself until later today - but using an EMTAC obviously
Click to expand...
Click to collapse
I think the problem is that the xdaII doesn't support a bluetooth serial port profile. I have tried virtually everything and had no luck.
Please keep me posted on how you get on, I really hope we can get this sorted or I will have a gps reciever paper weight.
Steve
Hmm
Due to the nature of yesterday, it wasn't until midnight (GMT) that I could get to have a play with my XDA II & EMTAC BTGPS (& I wasn't sober )
Installed TTN2 and tried to connect - not a sauasage
There "seems" to be something using COM6 and as such TTN2 can't use that as the path to the EMTAC - check box in the GPS options won't check. Turn off BT & you can check the box, but it won't connect as something else obviously can't use it either :? Dunno - I'm not a programmer but I'm going to have to check this out.
I'll speak to a contact @ EMTAC & see if they have been sucessful in bonding to an XDA II (HTC2?) & if so how. Otherwise I'll keep on playing with it & see what I can find out.
Anyone else got any tips or ideas what might be the way of resolving this?
Have you tried turning off the "receive incoming beams" under settings/connections, that may or may not free up the first com port.
I know someone with the same problem. O2 have told him that Tom Tom are working on a new version of software to fix this specific issue and it will be downloadable from the TT site. They couldn't say when.
xdaguru
Beam off did seem to allow me to connect to COM6 but not for my device Might be worth trying Steve because TT Wireless was one I could connect to.
IIRC from iPaq Bluetooth Manager, you had to bring up the device options once bonded and then select a serial connection. Pocket Loox as well. The BT Manager in the XDA II is very basic. So I do wonder if its a TT soluble solution or does it need an upgrade to the BT Manager?
If its a problem soluble by TT then I'm prehaps more hopeful
Sorry to go off topic but I wonder if this is the same PTMW that I know?
How you doin m8?
Hello Danny
Yes it is I
Can't be that many PTMW!'s about
All's well & I'll catch you on the other side one day
Yeah I guessed there could be only one PTMW
I take it you're lucky enough to have an XDA2 already? I always knew u were a gaget fan like myself. I have a month left on my XDA1 contract
Hopefully Tom Tom will have the problem ironed out by then as I have TTN2 aswell.
Pay us a vist on Scoobycity soon. Alots changed and we're alot bigger now
Any bluetooth GPS working with the XDA2 ??
Is there anyone who got the XDA2 working with a bluetooth GPS ? I am very eager to get one (both the XDA2 and a bluetooth GPS) but I would like to hear from some who got a combination working .
Thanks,
Marco
Its being looked into Marco
It may be that the BT Manager may not have various BT options enabled, so it may need a software update/patch from O2.
Spoke to O2 this morning.
They are "aware that not everything works with BT" and are working on a software update.
No timescale offered
I have an Emtac and was going to buy the XDAii to replace my Loox but without this bluetooth connectivity I will save my money. However interestingly it does say on the XDA website...
...or use TomTom Bluetooth with Xda II and cut down the amount of wires in your car
Click to expand...
Click to collapse
I'd say this is enough to get a refund if you want one. Page in question is located here...
http://www.my-xda.com/gps.html
TomTom and Bluetooth
The fault with the TomTom software and Bluetooth lies solely in TomTom's software. TomTom have recognised this and are aggresively working to fix the problem.
The TomTom GPS software doesn't know to read the details of the virtual com port. So give them some time to fix the problem....
Where did this info come from? do you have a link? I had heard that it was to do with the Bluetooth GPS itself not the TomTom software? If you're in the know, could you do a little expaining for a half-wit like me?
Hi
I too have just upgraded to the XDA II from the Ipaq 3970, and I also have an Emtac BTGPS.
Speaking to O2 it appears they used to support the TomTom BTGPS but do not any more.
It would be very interesting to find out if any one has a TomTom BTGPS and can serial link it to the XDA II
Dom
TomTom and Bluetooth
mother said:
Where did this info come from? do you have a link? I had heard that it was to do with the Bluetooth GPS itself not the TomTom software? If you're in the know, could you do a little expaining for a half-wit like me?
Click to expand...
Click to collapse
The fact you're able to bond with the unit shows that bluetooth is working correctly.
The issue is that the tomtom software can't read com6: (which is where bt is hiding) or do anything with it, because of the way the software works.
This is because the Bluetooth manager on Xda II is from MICROSOFT, whereas on other devices it's manufacturer specific. As far as I know this is the first ever deployment of the MS Bluetooth stack directly.
Speaking to O2 it appears they used to support the TomTom BTGPS but do not any more.
Click to expand...
Click to collapse
Then why do they say they support TomTom on their website? Seems like a few people at O2 dont really know what's going on?
I've not known that O2 has ever supported EMTAC BTGPS 'cos the XDA (1) didn't have bluetooth support :?
Surely it is the BT manager that is at fault? Not allowing the a serial connection from the manager to the Emtac?
TomTom is looking to read Com6 (when told to) but the info its getting is not sufficient or mapable.
I've run BTGPS with a TDK B/tooth card and it needs to be told (as do other managers) to make a serial connection to the BT device.
Test for someone (I'll try & do it too)
Find an alternate mapping software that *should* accept a BTGPS device & try to connect...
Related
Hi,
does anybody know, if the TomTom Navigator work on an MDA2. I've got my MDA2 since monday and i am not able to get TomTom Navigator (Version2 incl. the newest Updates) running. The installation-process works fine, but if I start the installed software, I get the lovely circling wheel in the middle of the screen...and that's all...hmmm...so, does anybody got a working installation of tomtom2 on an MDA2 or an XDA2 ???
Next question:
Does anybody have experiences with a Bluetooth-GPS-Mouse on a MDA2 (maybe this question is not very important, if the answer of the question above will be nefative ;-)
greets from frankfurt / germany
roberto
There's a thread on Bluetooth GPS and the XDA II/MDA II (http://xda-developers.com/forum/viewtopic.php?t=3341)
in which there is an answer to both your questions.
Haven't seen anything new lately on either topic:
- Tom Tom with any kind of GPS
- Bluetooth GPS
I had the same problem, then I tried a different SD (128 instead of 256) card for map storage and it works. I remember TomTom having the same problems with Ipaq 5450’s until HP issued a fix.
I’ve just ordered a Bluetooth GPS.. Looks like I’ve got more problems ahead.
I’ve just ordered a Bluetooth GPS.. Looks like I’ve got more problems ahead.
Click to expand...
Click to collapse
Please keep us informed, regardless if the Bluetooth GPS fails or not..
By the way: I read a review of the new Toshiba E800 PDA (which has a 480x640 screen :shock: and beautiful indigo color (finally something else)) and the author mentioned testing the PDA with a Rikaline Bluetooth GPS receiver.
At first, he had difficulties connecting the Toshiba and the Rikaline, but managed to solve it by setting TomTom to 'Bluetooth Card' instead of 'COM6'.....
Might be worth a try :?:
Take care :!:
There is no 'Bluetooth Card' setting on Navigator 2.
I still can't get it to work.
Help!
RedBull said:
There is no 'Bluetooth Card' setting on Navigator 2.
I still can't get it to work.
Help!
Click to expand...
Click to collapse
:roll: I guess it has to do with the Bluetooth Manager of the Toshiba then...
Nothing left but wait for Tom Tom updates and more MDA2 Bluetooth profiles
Somebody101, will you try something, install maps to main memory and see if that works, I know you can only install a portion but I would be interested to hear the results.
Hi, i just bought a Bluetooth GPS receiver (called BT-R500). I am wanted to use it with my Qtek 2020 (ROM 1.66.04ITA if this can be useful to somebody for helping me out...)!
I can't let them "communicate"...why? Anybody knows what i should do for the setting (which COM port should i use? it says com5 but can't find any satellite...)!!!
Is there somebody that had this kinda proble and solved it? Could you be so kind to let me know? thanks
When you bond the gps it should ask if you wish to use it as serial device. What software are you using and what are the settings you have applied? Have you tried a free 3rd party testing program to see if you are getting connection/signal?
I am using "Mapsonic", that requires a GPS that supports the NMEA signals 2.0. My GPS bluetooth receiver meets NMEA 2.2 requirements. This might be a problem in your opinion? I have not tried to use it with a 3rd party, just because i don't know anyone that has a GPS on his palm.
bt
www.bluetooth.jazztel.es
Hustladave said:
Hi, i just bought a Bluetooth GPS receiver (called BT-R500). I am wanted to use it with my Qtek 2020 (ROM 1.66.04ITA if this can be useful to somebody for helping me out...)!
I can't let them "communicate"...why? Anybody knows what i should do for the setting (which COM port should i use? it says com5 but can't find any satellite...)!!!
Is there somebody that had this kinda proble and solved it? Could you be so kind to let me know? thanks
Click to expand...
Click to collapse
can you actually paired in the first place? or just unable to detect the satelites?
Hustladave
Maybe you should check the baude rate of the GPS device. I am using SysOn and had the same problem. You may also need to check if you are using the old rom or the new WMSE. For the old one, you should install bluetooth tools.
Alternatively, you can try GPS Tuner as it has an auto search function for the devices to communicate. :wink:
i have the same problem with holux 231 BT
i have the 1.72 wwe it work fine in com 5 the navigon reconize him but i have a motorola car kit he can't work with the MSbtooth i must install Bt tools to pair it but in the same time i loose the connection for the GPS
hi change from com5 to com7 i have a tools named gpsviewer delivred with the holux hi fond the GPS but the navigon no
i change the rom to the we 2.20 CHS but i discover that the GPS can't be found i install windcom stack ver1.49 and it work like a charm with the GPS but the are no profile for the car kit
the are ini suggestion to make the 2 device working in the same time
Sacaman
Hi Guys
Before you go and spend your money on tom tom 5, if you have an xda2i it's not compatible and tom tom won't supoort it. I've only found this out after buying the tt5 upgrade.
I can't get it to see the gps device on outgoing com port 6 on my xda2i.
Got a Fortuna Clip On BT GPS
Lost all the will to live with this now, feel like selling my xda2i.
Any help before it goes on ebay?
thanks
jase
Just got TomTom 5 for my XDA IIi as well. I've got the wired TT GPS receiver and all I get is no GPS device. I've set TT to the right receiver type but can't see anyway of changing the com port to use.
Any ideas? or like you am I screwed
I have an xda2i with TT5 and BT GPS receiver...works fine.
Or at least as good as with TT3. TT5 seems to turn off BT once it's been closed though, bit annoying.
Didn't have any problems with installing it though.
Ant
Ant
Which BT GPS Receiver are you using?
Can you go through which settings in TT5 did u use, what's your outgoing com port etc.
Thanks
jase
does this thread works for You?
http://forum.xda-developers.com/viewtopic.php?p=125456#125456
I'm thinking to mget the qtek2020i as wel with the tt5
Hi Goldenhands
I'll give it a go.
Thanks
I've tried this and it doesn't work.
Bluetooth app locks my outgoing com port to port 6. Does this need to be changed?
Thanks
AndyM said:
Just got TomTom 5 for my XDA IIi as well. I've got the wired TT GPS receiver and all I get is no GPS device. I've set TT to the right receiver type but can't see anyway of changing the com port to use.
Any ideas? or like you am I screwed
Click to expand...
Click to collapse
untick recieve all incoming beams under connections
It was already unticked mate.
I have a QTEK 9090 with a BT antenna from TT3.
I simply installed TT5 over TT3 and everything worked right away.
Only problem is that in many screens, the onscreen keyboard is missing so I have to use the slideout keyboard. I expect them to fix that but it's really not that big a problem.
you have an xda2-s?
tom tom 5 is compatible with that but the xda2i isn't according to tom tom.
I am running Tom Tom 5 with the GreatBritain-Map on and XDA 2i with an "Aktronix" Bluetooth GPS reciever and it works absolutly with no problems whatsoever
My GPS reciever isnt paired and uses COM 6:
Tom Tom turns the bluetooth on by itself so my bluetooth is set to off usually.
I dont have a bluetooth headset.
Hi Danny
You saying that you didn't pair your gps receiver in with your xda2i first in the bluetooth manager?
Thanks
tomtom5 and xda2i
Have aked tomtom if it is a problem ,since have ordered upgrade,will let you know the response!
ok was just a suggestion ,as mine works fine ,with the phone off ,i got it to work perfectly with phone on made a call updated traffic until i put the phone in it's cradle and the gps locked it all up from then on
just had a look on TOMTOM site for unsupported devices for TTN5 here is the list
The following devices are not compatible with NAVIGATOR 5:
* Fujitsu Siemens (all models)
* Toshiba (all models)
Siemens SX 56
Acer N10
Eten P700
Mitac Mio 558
PackardBell Pocket Gear 3025
ViewSonic V37
Yakumo DELTA 300 , DELTA 400
ASUS MyPal (these do not have SD capabilities)
* We are working on achieving compatibility with the Toshiba and Fujitsu Siemens devices by Autumn 2005. For technical reasons, NAVIGATOR 5 will unfortunately not be made compatible for the other devices on the list.
the link is
http://www.tomtom.com/shop/upgrade.php?action=pda&TT=24170bb816956c251a093199d55d42ea
So i am abit confused when you say TOMTOM 5 is not compatible. I have also emailed TOMTOM i awaiting their reply, i will post it on here once i get it.
I dont have a XDA IIi i have a XDA II .. i was thinking of upgrading to the XDA IIi but now i shall wait and see.
regards
Nya
just had a look on TOMTOM site for unsupported devices for TTN5 here is the list
The following devices are not compatible with NAVIGATOR 5:
* Fujitsu Siemens (all models)
* Toshiba (all models)
Siemens SX 56
Acer N10
Eten P700
Mitac Mio 558
PackardBell Pocket Gear 3025
ViewSonic V37
Yakumo DELTA 300 , DELTA 400
ASUS MyPal (these do not have SD capabilities)
* We are working on achieving compatibility with the Toshiba and Fujitsu Siemens devices by Autumn 2005. For technical reasons, NAVIGATOR 5 will unfortunately not be made compatible for the other devices on the list.
the link is
http://www.tomtom.com/shop/upgrade.php?action=pda&TT=24170bb816956c251a093199d55d42ea
So i am abit confused when you say TOMTOM 5 is not compatible. I have also emailed TOMTOM i awaiting their reply, i will post it on here once i get it.
I dont have a XDA IIi i have a XDA II .. i was thinking of upgrading to the XDA IIi but now i shall wait and see.
regards
Nya
TOMTOM 5 Might be able to help you out IMPORTANT
Hi Guys & Gals!.. right might be able to help here... ive got a magician and I got tomtom 5 on saturday... I have the original bluetooth TOMTOM GPS and I had Tomtom 3 on the pda, I uninstalled tomtom 3 and then installed tomtom 5.. and it connected to the bluetooth reciever. Then I went off thinking it would work and it didnt connect (no GPS found), so I reintstalled again did all the bonding int bluetooth manager, and it still didnt work... so I did a hard reset which was a pain but then reinstalled tomtom 5 again.... went to work and it still didnt work so I was in the car messing about trying to get it to bond and did it all again and it didnt work!...
So just got to work (HERES THE IMPORTANT BIT) and went up to my mate whos a techie currently building the largest Oracle solution in the world) and said look this blinking things not working.. so he started proding the screen with the pen all over the place mumbling as he does and hey presto the screen was in the GPS status screen were it shows all the satelite data and he touched the bit thats says NO GPS device (its not a box its just the text) and it then came up to reset the device to finish installation and hey presto it worked!!!!! ....
SO try this if it works the bloke is a genius !....and TOMTOM have a serious floor in there software.
Post on here your findings :lol: I keep checking it every 5 mins to see if its connecting and it is fine now.. SO FAR!
Having said that
Having said what ive just said... ive just turned it on and its now doing it again and not finding the module... dont believe it! it seems very wierd... let me know your thoughts please!
Having said that again.. ive now changed to a wired one in the configuration and selected it then gone back to the bluetooth one waited 60 seconds and clicked on the no gps device again which has reset the device and its working again! wierd.......!
i have holux gpslim 236 and paired it with my XDA IIi then i started my tom tom navigator software and went to the device selection so i done the bluetooth one and tried every connection available in there and nothing it yet again says no gps device! :? i have no idea what i am doing wrong, i would love to see this thing work could anyone help me out pleaseeee.
is it the tom tom software??
the pda??
or the gps device ??
one thing i have noticed is when i go to bluetooth manager there is no incoming and outgoing connections for example its ment to show com ports, there is nothing can it be this?? please can someone explain where i am going wrong, thank you
Hi there,
Same hardware here. The GPSLim236 must be talked to using port COM6.
You might want to get GPS-Viewer, coms in handy when you need to diagnose GPS communication problems (it's there somewhere, can't make out where, Google knows I think ).
There's also a tickbox in the Bluetooth Manager regarding the SPP connection that says "Encryption" or something similar : make sure it is NOT checked.
Good luck !
In the connections tab click infrared and make sure "Receive Incoming Beams" is NOT ticked, If you have not already done it.
CHEERS guys, works now thanks for both helps
Hallo experts,
I am a newbie to this forum and a greenhorn concerning programming. But I bought the HTC Kaiser in order to get it running with my Mercedes Bluetooth SAP V2 Cradle (Article number Mercedes Benz: A204 820 0535). Unfortunately, the cradle does not work with the Kaiser. Do you know any solution (another ROM? for example) that may change the situation?
Thank you all very much for your appreciated help!
doc holiday
HTC Kaiser
Don't have a Merc....One day maybe. Had similar problems as you with a Parrot bluetooth car kit though.
Found that Dutty 29 Apr, and Laurentius' latest roms work completely with it though. Other roms may work too (don't want to tread on anybody's toes).
Some of the older cooked roms would either not route the audio properly, would only work for one call then stop routing, etc.
The latest rom I have tried is PDAViet'. Very fast in some aspects, Very slow at others. The Parrot car kit has real problems working with this rom.
Basically, try a Dutty (latest), or the latest Laurentius and I reckon everything will be fine.
Thank you very much Blartiartfast for you rapid and competent reply!
So I will try to change the Rom to the one's you mentioned and will report the result
Have a good time m8
doc holiday
HTC Kaiser
i've had problems with both a hermes and kaiser connecting up to the mercs bluetooth.
What i found i had to do was to get both the merc and the kaiser to search and connect to each other at exactly the same time. I found that if you made the merc search for the phone it wouldn't auth, and vice versa. But oddly making both connect at the same time worked.
Hope this helps.
carkit
hello,
i have a bmw , and with the Laurentius_26 rom (http://forum.xda-developers.com/showthread.php?t=389915) , my bluetooth connection works as a charm.
grtz
Thanks both of you ghostie and BeeCee
I will try it
doc holiday
HTC Kaiser
BeeeCeee said:
hello,
i have a bmw , and with the Laurentius_26 rom (http://forum.xda-developers.com/showthread.php?t=389915) , my bluetooth connection works as a charm.
grtz
Click to expand...
Click to collapse
Agreed! Laurentius_26's latest ROM works very with my ML63 AMG. Sometimes it randomly disconnects, but what Phone/Rom isnt going to?
ghostie said:
i've had problems with both a hermes and kaiser connecting up to the mercs bluetooth.
What i found i had to do was to get both the merc and the kaiser to search and connect to each other at exactly the same time. I found that if you made the merc search for the phone it wouldn't auth, and vice versa. But oddly making both connect at the same time worked.
Hope this helps.
Click to expand...
Click to collapse
This approach has worked for me several times as well. I use Dutty's April 29th ROM and have found stability to be fantastic. I haven't dropped a Bluetooth connection yet. Good luck.
T
Many thanks to all of you folks
doc holiday
HTC Kaiser
Problems always persist with HTC Kaiser and MB bluetooth SAP
As stated in the replies to my question (Thanks to all of those who answered), I tried the last Dutty ROM and the last Laurentius ROM - but in no way I have been able to establish an adequate bluetooth SAP connection between my Kaiser and the mercedes benz bluetooth sap v2 cradle (I provide the original art. no A204 820 0535 in order to be more precise about the item I use).
Does anybody have a step by step "cooking receipt" how I could establish the communication? I suppose that the MB bluetooth sap device uses A2DP, but nobody could confirm until now...
The Kaiser recognizes the MB bluetooth sap device on a regular basis as "UHI-SN3483" and sometimes as "MB-Phone". The MB device recognizes the Kaiser as "Pocket_PC" with the Laurentius ROM and as "TYTN II" with the Dutty ROM. Note that the "Remote SIM Access" was enabled in both ROM's.
I tried also to modify the registry entry
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD from decimal 5898764 (Smartphone) to decimal 5374476. But no connection at all.
I didn't use JETware because I do not want an HFP but a SAP connection.
Another point I could not deal with is that the Dutty ROM features in Settings an item named "Bluetooth SIM Access". What does it is for and how to set it? pointing on it does not result in another effect than display in the header where was located Settings the term "BT Remote SIM Acce"
Sorry I have been that long, but I really need to get into this bluetooth SAP connection with my Kaiser
Thank you all
doc holiday
HTC Kaiser
hello guys... I've read in one of the threads for a diamond-rom-based rom that it includes "SIM Acess Version 3.0.xxx"... perhaps it will work with thsi new version... but until now I've not found any cooked, diamond-based rom, that includes SIM Access...
doc holiday said:
Does anybody have a step by step "cooking receipt" how I could establish the communication?
Click to expand...
Click to collapse
With every ROM that I have used before this one - it has been a rather hit and miss endeavor to link my Parrott bluetooth in my car with my phone. I USUALLY have to tell the PArrott that I want to link with a phone and step through things.
With the DEATH V3.5 ROM installed I got in my car and was in a hurry and thought I would sync them later.
After I started the car the phone indicated that the PARROTT wanted to connect and establish a connection - I indicated that it should be allowed - I was then asked for a key code on my phone- I looked at the PARROTT display device and had a 4 digit code there - keyed that into my phone and it paired easily.
Go figure...
Bill
I work for Mercedes and I paired my Kaiser 10s of times. I am guessing you are in the UK because we don't use the sim access cradles. I don't see why our technology would be better than yours. The cradle we sell that works is 6-7-87-5878 But I doubt it will work there.
I was trying to use a Nokia 616 car kit with T mobile sim in the UK, but T mobile does not support Sim acccess profile with their sims. I am about to try an o2 sim which hopefully will.
If the NB uses sim access profile and the provider does not support that use of its sim, then the Nokia will not even allow fallback to bluetooth car profile.
I hope you proble is not being caused by the above but thought you should be aware in case!
Regards
Chapelhill
It does works for MBZ. I am using it without any issue
Htc touch diamond and Mercedes SAP kit
i have a mercedes sap v2 car kit, i have the same problem being not able to pair with windows mobile based phones, the car can see the phone but phone cannot recieve the password confirm and so connection fails.
i tried many roms, added the SAP settings, and yesterday had the chance to try the new HTC touch DIAMOND on car, but same results.
i think that solving this problem is just a software issue, first in windows profiles, or as addition from Phone manufacturers (as HTC) ,because the car kit is already fixed to car and cannot be modified to use other profile.
but i still have hope that the professionals in this forum can help to solve this problem, before any of Microsoft or HTC. Please share any information to help
Thank you
Mercedes Benz makes five BlueTooth adapters that have five proprietary firmware that each adapts to a different type of phone. For example, a Vorizon CDMA BT adapter will not work with Sprint CDMA phone and vice versa. So in essence, if you have a AT&T service, and use a Motorola Phone, MBZ provides a specific BT adapter, that would be close to impossible to pair with an HTC device.
I would suggest going to an authorized Mercedes Benz parts department at their dealership and request to try all 5 adapters b4 you commit to buying one.
Only In the new 2008 and 2009 C-Class MBZ cars the BT adapter is universal and built in. In earlier models and other models (2008's), the BT adapters would need to be purchased independently; a 2X4 device that installs in the center glove box that works as a link between the media port of the car ( Hands Free) and the phone.
My 2 cents....
try the neon radio rom
i tried it in one of my friends car
if it did not work (change your car to fit your phone )
doc holiday said:
Hallo experts,
I am a newbie to this forum and a greenhorn concerning programming. But I bought the HTC Kaiser in order to get it running with my Mercedes Bluetooth SAP V2 Cradle (Article number Mercedes Benz: A204 820 0535). Unfortunately, the cradle does not work with the Kaiser. Do you know any solution (another ROM? for example) that may change the situation?
Thank you all very much for your appreciated help!
doc holiday
HTC Kaiser
Click to expand...
Click to collapse
Penske MB said:
It does works for MBZ. I am using it without any issue
Click to expand...
Click to collapse
which Penske Mercedes Benz do you work at?
doc holiday said:
Hallo experts,
I am a newbie to this forum and a greenhorn concerning programming. But I bought the HTC Kaiser in order to get it running with my Mercedes Bluetooth SAP V2 Cradle (Article number Mercedes Benz: A204 820 0535). Unfortunately, the cradle does not work with the Kaiser. Do you know any solution (another ROM? for example) that may change the situation?
Thank you all very much for your appreciated help!
doc holiday
HTC Kaiser
Click to expand...
Click to collapse
Try Htc shipped WM6.1
If not work.
Read this.
The Bluetooth® (HFP) telephone module, which is also suitable for Motorola PEBL U6, Nokia 6131, Nokia 6111, Nokia N70, Sony Ericsson K610i, Sony Ericsson W550i and BenQ-Siemens EF81 mobile phones, acts as an extension of the pre-installation for mobile phone with universal interface, a feature which is already present in many of the latest Mercedes-Benz models (optional extra Code 386). The module is simply inserted into this pre-installation in the centre armrest. The Mercedes-Benz Bluetooth® (HFP) telephone module, in independent-design closed-box format, will be available from Mercedes-Benz sales partners from March 2007, and is priced at EUR 250.00, including VAT (price applies to German market).
High-end telephony: the second generation of the Mercedes-Benz Bluetooth® (SAP) telephone module offers even more possibilities