I tried to upgraded my SX66 system and radio rom. When I clicked "next" on the Blue Angel Flash ROM Tool to start up upgrade, the pocket pc screen turned off and my desktop was diconnected with the pocket PC (activeSyn showed "Not connected". And the desktop showed up the message "Cannot recognize USB device". I took a look at the PPC, its backlight was off and only had a message "USB v2.07" showed up". I tried to reset the PPC, but it is not working anymore, only show the message "serial v2.07". Any one help please!!!
see your other thread...
Related
i am using windows XP SP with active sync 3.8
when i connect my Qtek 1010, it says unrecorganized USB device, i could not connect my qtek to PC, how can i fix this problem
i dont have installation CD for my qtek
There is no driver or installation for your phone. What should happen is you install activesync, make sure that usb connection is checked on activesync then soft reset your phone, place in cradle or plug in to usb cable. Xp should indicate "hardware found", it should then say something like "htc sync". Activesync should then launch automatically. I have found that sometimes if plugged into a hub you may get an error and even swapping over to a different usb port can make a difference too.
hi
the error message is
USB Device is Not Recognized
One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it.
i am really new to this, while i was playing with it i think the OS is dead
when i on the qtek it gives blue background saying Qtek
and gives some numbers
G32S54
R3.19.01
3.16.68
and it keeps freezed
how can i fix this problem?
i dont have the ROM image, no cd's
http://forum.xda-developers.com/viewtopic.php?t=27384&highlight=guide
I have the Everex-E900. My problem is the following:-
Till recently the ppc was operating fine. One day i dropped it accidentaly.
From then on whenever i press the power button only a blank screen appears!
On pressing the power button for long a test screen appears. this shows the following message:-
"Test Screen
Ver 100.0017
May 06 2005
Please reset to enter system"
soft reset doesnt have any effect.
On doing a hard reset the screen says:-
"USB downloader B05 0012
Flash Capacity = 128MB
USB downloader ready
USB host is not connected"
On connecting USB cable to computer
it says
"USB host is connected
Waiting a download."
On the computer the Activesync wizard is unable to connect/detect the PPC
What should i do ? How do i flash the rom without activesync. I have the latest upgrade file which is an"EXE".
Please Help!!
Ok so I have WMDC installed on my computer and Outlook set up. When I go to connect my Fuze to my laptop via USB it says its an unidentified device and has to find drivers for it. When its finished and I get the little alert from my tool bar it says it is successful and it says when I click on it "Software Ready to Use" but nothing happens. And when I look at WMDC it says not connected. I'm trying to get FuzeBerry on my Fuze, but why won't WMDC work?
Please!!!!!!!!!!!!!!!!!!!!
Ok so I have WMDC installed on my computer and Outlook set up. When I go to connect my Fuze to my laptop via USB it says its an unidentified device and has to find drivers for it. When its finished and I get the little alert from my tool bar it says it is successful and it says when I click on it "Software Ready to Use" but nothing happens. And when I look at WMDC it says not connected. I'm trying to get FuzeBerry on my Fuze, but why won't WMDC work?
*Double post*
Closed
Dave
I am running Froyo 7 with Glemson's latest build (9/14) on my HTC Touchpro II. When I connect my phone to my computer, the computer recognizes the phone as a mass storage (the popup on the computer indicates the device driver is installed and the drive appears under "Devices with removable storage",) but when I try to browse it, I get the famous "Please insert a disk into removable disk X".
The phone says "USB connected" and sometimes will periodically pop up with the message "USB Connected" and a button saying, "click to turn on USB storage". When I click the button, the spinner starts, but nothing happens.
I have turned on "USB debugging" on android.
I am able to use the same cable/USB port for data transfer between my computer and phone (when the phone is running windows mobile 6.1) In fact, this is the only way I am able to transfer data to my phone. It works, but it is a pain in the butt!
I have Googled in this forum and www, but have not found a solution yet. Any help would be most welcome.
no-one has any suggestions?
This has been driving me crazy for months...
Am I the only one with this problem?
hmm. interesting