Problem connecting USB on HTC Touchpro II - General Questions and Answers

I am running Froyo 7 with Glemson's latest build (9/14) on my HTC Touchpro II. When I connect my phone to my computer, the computer recognizes the phone as a mass storage (the popup on the computer indicates the device driver is installed and the drive appears under "Devices with removable storage",) but when I try to browse it, I get the famous "Please insert a disk into removable disk X".
The phone says "USB connected" and sometimes will periodically pop up with the message "USB Connected" and a button saying, "click to turn on USB storage". When I click the button, the spinner starts, but nothing happens.
I have turned on "USB debugging" on android.
I am able to use the same cable/USB port for data transfer between my computer and phone (when the phone is running windows mobile 6.1) In fact, this is the only way I am able to transfer data to my phone. It works, but it is a pain in the butt!
I have Googled in this forum and www, but have not found a solution yet. Any help would be most welcome.

no-one has any suggestions?
This has been driving me crazy for months...

Am I the only one with this problem?

hmm. interesting

Related

g1 will not sync with pc

I've had my g1 for about 2 weeks. I have root. I have the RC33 update. I was able to connect to a pc after this update then one day I tried to get this song off of the computer so I plugged in the phone and it said "found new hardware"....I have tried everything different pc's different usb ports,different storage cards,....I tried the anycut app method....failed on one pc it opened on my laptop and then shut off again....I've soft reset,hard reset...removd the card and put it back in...no luck...any one with the answer please help...I will love you long time!
And the pc does recognize the phone is plugged up because its charging...
Hi,
Found new hardware means it was trying to install the usb drivers for your g1.
If this was not done correctly, than several things won't work like adb.
So that's what that message is.
But unplug your phone and go into settings, applications, development uncheck the box that says usb debugging,
Exit out and connect your cable, mount you drive and you can transfer files back and forth again.
Ok I did that but the box was already unchecked...so I plugged up the phone...and nothing happens so I check the box and the g1 acknowleded the pc and vise versa....and the installation wizard is for Android Phone...and is asking for an installation disk...so now I'm back to square 1...
Once you have plugged in the USB cable and Windows has recognized your phone (i.e. no new hardware found dialog anymore), you need to pull down the notification bar of the G1 and click on "connected to USB" or something along those lines. The phone will then give you an option to mount the SD card for read/write over the USB cable.

Phone not recognizing usb connection when connected to PC

I was recently staying with some mates and tried connecting my HTC Legend to their laptop to transfer files, but the Legend did not recognize it was connected to a computer, just had the charging icon as if the cord was plugged into power.
I have the 'Default connection type' as Disk Drive, 'Ask me' each time option enabled.
On the computer, no autoplay or anything happens like it used to. I can see a removable disk drive, but it has the "Please insert a disk into drive X" error when I try open it.
I can access the SD card and everything fine through the phone..
Anyone know what's up?
Cheers
EDIT: Stock unrooted Legend
EDIT: Nevermind, rebooted phone and it works now.. sorry
This exact same thing started happening to me last night as well. I can see the drives in "My Computer", but they are greyed out and give me the "Insert drive to continue" error message. What gives?
usb
howzit guys
have you'l tried switching the phone off and then on again?
i've had this happen few times
its normally some app causing it not to popup or to be very slow in popping up
wait awhile.if still nothing then try switch off and then on and then connect the usb to the pc

[Q] incosistent usb mass storage mounting.

I seem to be encountering a slight inconsistency in regards to mounting the phone unto my windows 7 box.
Essentially what happens is this: I plug my phone into the computer and the little dialogue box pops up onto my phone (Kies, Mass Storage, PC Internet etc). I push "Mass Storage" and ideally what is supposed to happen is that the phone mounts onto windows.
Unfortunately it doesn't seem to mount.
What does happen is that the drive letter shows up, usually F:\ but it's not mounted.
When I pull down the settings menu, it says that USB is connected and that's about all.
I will unplug my phone, replug it back in again invoking the USB menu only this time, I will hit the "Home/House" button, or the "Back" button which will take me to the home screen.
I will drag down the settings menu like before, only this time under the USB box, when pressed it gives me the option to mount which if pressed, mounts the phone and gives me the ability to access it.
So whats the problem? It's very inconsistent. It doesn't always do that. Sometimes I have to unplug and replug my phone in to invoke the mount USB option.
My questions are these: Is anyone else having the same issue? Am I just not using this correctly? Is there any simple way to just "mount usb"? An app or perhaps a function that I'm not seeing?
Thanks!
Out of box, you always need to manually mount the drives once connected. It does not auto-mount. I was told there is an app that can auto-mount for you.
If you're running 2.1 firmware, the mount option is in notification area. If you're running 2.2 firmware, there will be a USB mass storage screen where you can click on the mount button.
That's fine manually mounting the drive, my question is: How do I mount the drive if there is no way (that I can find) that gives me the option except for the seemingly random "mount USB" box that comes up 7/10 times in the drop down settings dialogue?
It comes up 100% for me.
Sent from my SAMSUNG-SGH-I897 using XDA App
Could you describe the process in which you do? Perhaps I am doing something wrong in the procedure.
It comes up randomly for me too. I didn't have this problem on 2.1 Eclair. It isn't anything crippling, but it is annoying. It happens half the time for me.
I should mention too, that i am running Eclair 2.1.
boe_dye said:
Could you describe the process in which you do? Perhaps I am doing something wrong in the procedure.
Click to expand...
Click to collapse
Nothing special. Plug in the USB cable and go to notification area to mount the USB drives. I do configure my phone to prompt for USB mode everytime I connect.
You may want to try different USB ports on your PC.
My buddy has a Captivate that mounts fine in mass storage mode, except it brings up the windows dialog box saying "no disk in drive: Retry?" every time. It doesn't fail to work or anything, the sd card is accessible without any problems. It just throws up that dialog every time. It's rather annoying. Anyone seen this before?
Change it to "ask" instead of be "Mass storage" every time. I bet it'll work.
You might find that then changing it back makes it work again. Otherwise just leave it at "ask".
i never had it work in ask on connection mode, and it annoyingly always wants to launch kies no matter what setting i use even after messing with the setting in windows. i have more success with the phone in debugging mode and mounting from the notification menu. it may be that the other options wont work in debugging mode and the computer isn't trying to mount it as an mtp device because of kies.
if i was still on eclair id test it to make sure, my memory gets alittle fuzzy. froyo seems to work better in that area.
Your saying you just get "USB connected" instead of the norm "USB connected, select here to copy files to/from your computer" in the blind menu?
Happens to me as well. Usually if I reboot both the computer and phone I'm good to go. I didn't have the problem on 2.1.
The method that has never failed for me is to turn on USB debugging. Then when I connect the USB, I always get the second notification in the pulldown screen with the text "Select to copy files...". Clicking that brings up a box to mount (or some less vague word choice in 2.2), and accepting that always works to show the 2 drives on my computer.
USB debugging completely circumvents the USB settings panel. You can either use one or the other, not both. I have always found the USB debugging approach to be totally reliable. Right now on Cog2.2 Beta6 both approaches work fine, but I usually leave USB debugging activated for other reasons so I use that method by default.

Nexus 5 problem connecting to PC with USB

I've had this problem before, but I have always been able to fix it by uninstalling ADB and drivers, through WUG's toolkit, changing cables, device manager/update drivers, jumping up and down while spinning and plugging cable in, among other things. However, this time is different and I'm not sure if it is because of M on my phone or the Windows 10 update. This problem has been going on for over a month now, and I've had both since it started. I've tried all the above mentioned things, along with everything else I can find, and none of them work.
The only way I can get my computer to recognize my phone to share files is to go into device manager every I plug it in is to; go to device manager, right click to update driver, select do it from my pc, select driver in folder. After doing this it works perfectly fine, but I have to do it every time I plug my phone in or every time my phone turns off while it's plugged in. The error message I get on my computer is "USB device not recognized" when I go into device manager it says "device descriptor request failed" It does this on both of my PCs. Any ideas or help would be greatly appreciated!
DT USC said:
I've had this problem before, but I have always been able to fix it by uninstalling ADB and drivers, through WUG's toolkit, changing cables, device manager/update drivers, jumping up and down while spinning and plugging cable in, among other things. However, this time is different and I'm not sure if it is because of M on my phone or the Windows 10 update. This problem has been going on for over a month now, and I've had both since it started. I've tried all the above mentioned things, along with everything else I can find, and none of them work.
The only way I can get my computer to recognize my phone to share files is to go into device manager every I plug it in is to; go to device manager, right click to update driver, select do it from my pc, select driver in folder. After doing this it works perfectly fine, but I have to do it every time I plug my phone in or every time my phone turns off while it's plugged in. The error message I get on my computer is "USB device not recognized" when I go into device manager it says "device descriptor request failed" It does this on both of my PCs. Any ideas or help would be greatly appreciated!
Click to expand...
Click to collapse
I think I'm getting something similar since I've installed "M"....
Under:
Settings -> Developer Options -> Select USB Configuration
It say's it's set to "MTP (Media Transfer Protocol)"; it really isn't. When I plug the phone in, under Win 8.1, a desktop window opens with "AOSP on Hammerhead" (or something like that), but there's nothing in it. Now for some magic....
With the phone in one hand, and the mouse in the other:
1. Open Settings -> Developer Options -> Select USB Configuration
2. Touch "MTP (Media Transfer Protocol)" (even if it's already selected)
3. Listen for the PC/Windows Desktop (it should give an audible sound)
4. Immediately click on the "AOSP on Hammerhead" text in the path listed on the open Windows widow ("This PC -> AOSP on Hammerhead")
5. You should see an "Internal Storage" folder appear
6. Open the folder, enjoy MTP

Annoying popup "The connected device is unable to access data on this device."

Annoying popup "The connected device is unable to access data on this device."
Every time that I connect via USB my not-rooted Galaxy S6 (SM-G920F with stock Android 7.0) to my laptop with Ubuntu, this popup annoys me:
"The connected device is unable to access data on this device. Reconnect the USB cable and try again. Android File Transfer or Samsung Smart Switch..." and I have to touch "OK" to dismiss it.
I dismissed it so many times that at this point I have nightmares at night about this popup that tries to kill me wrapping itself around me and taking my breath away.
What I tried is to set "USB configuration" to "Charge this phone". In this case the popup doesn't appear when I plug the USB cable, but after a while, if I also have enabled "USB debugging" (that I need), the "USB configuration" reverts to "MTP (Media Transfer Protocol)" by itself and the popup reappear at the next cable plug. Double annoyance!
Any way to kill that popup definitely?
[GUIDE] Fix MTP driver installation on Windows 10
Hi guys and girls... I just recieved my new phone a few days ago. Plugged it into an old Windows 7 x64 laptop and Windows instantly updated the driver. On a 2016 Dell E7450 Windows 10 x64 laptop... It didn't. Tried the Google USB drver package...
forum.xda-developers.com

Categories

Resources