PLEASE HELP!!!
I think i killed my MDA Compact II (HTC CHarmer)
I tryed to flash it, it do by 100% but now is nothing to do i think!
I´m sorry about my english, it´s bad!
Now i can use it like a flash or i dont know now what i can do...
It boots to O2 Screen when i put the Batterie off an the Power cable on.
The Display Blink White and the Led to, and so.....thats it!
I cant connect to PC but the USB cable is not the same like the Power Cable.
I can´t get an connection about USB!!!
Now i´m very sorry about my english but can anybody Help me?
The System what i can see on my sreet at boot is:
IPL 1.05
SPL 1.05
GSM 01.09.10
OS 1.5.4.2
Can i try to flash with SD? Whitch ROM?
I think my great Prob is that i didn´t had an Backup about my device!!!!!
Bye and thanks fo Help!
GER: Wenn mir jemand Helfen kann, der möge sich do bitte, bitte melden!
See if you can get into the bootloader. With the phone off, hold down camera and plug in the usb sync cable until the screen comes up. Then you can use flash a new rom to it. Unfortunately the only install package avaliable for the charmer is the wwe english version so your stuck with that unless you can find a german sd backup to flash afterwards. you'll probably need to use Wizard_RomUpgradeUtility_noID first to install it.
It´s not work when the usb sync cable is connected!
It only works with the power cable. But when i go to the bootloader with the power cable and switch to usb sync cable the screen is Black!!!
Can i use a SD-Card flash???
THX for...!!!
Compact 2 bootlader
Hello,
Ihave killed my mda compact 2 with wrong Rom (Qtec)
Now the mda come only in bootloader modus with power plug in !!!!
without usb or serial sign on the left side !!!
with original usb cable it does only blinking the Display !!
Have i a change with usb cradle ???
what can i do ???
Please help !!!
Thanks
jun36
This is what i mean.
The same prob what i have!
What can we do now?
Re: Compact 2 bootlader
you should be able to use an sd backup, once youve got one on the card entering bootloader will prompt you to download it.
Related
can someone help me. Im upgrading my mda compact with the JAM_WWE_11200_128_11210_ship, after running the GetDeviceData.exe, I put the DeviceData.txt in the JAM_WWE_11200_128_11210_ship map and started the MaUpgradeUt.exe, Firts everything seems fine but now my mda compact gives a blackscreen. And there is no progress ..................
CAN SOMEONE HELP ME OUT!!!!!!!!!!!!!
MDA COMPACT Upgrade // BLACK screen // Bootloader screen
Now i have a greater problem. The upgrade didnt work. But restart the MDA compact it want to install the t-mobile software. But that does not work. It reboots and will reboot in his bootloader sreen. It says USB v1.00. So my mda compact will not work.
Is there someone who can help me out!!!!!!!!!!!!!!!!!!!!!!!
Re: MDA COMPACT Upgrade // BLACK screen // Bootloader screen
torwul said:
Now i have a greater problem. The upgrade didnt work. But restart the MDA compact it want to install the t-mobile software. But that does not work. It reboots and will reboot in his bootloader sreen. It says USB v1.00. So my mda compact will not work.
Is there someone who can help me out!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
same Problem.
Please help
Experienced It
Experienced the same thing, what I did was just unplug the USB, rebooted my WinXP SP2 then reconnected the USB and it showed Serial with backlight off and just restarted the Upgrade Process and it worked (but just make sure as well that you have enough battery run for the next 20-27mins tops.)
Magician is dead
I have the same problem, the upgrade didnt work out and now I am stuck in the bootloader
Dont Worry --- do this
This is what you do.
Disconnect your JAm from USB
Go from your PC , ACTIVESYNC > FILE > CONNECTION SETTINGS > remove the check mark for ALLOW USB CONNECTION TO THIS DESKTOP COMPUTER
Now connect your JAM to your PC again via USB, this time active sync should not start since you have disabled USB
Now double click on the installer file of the ROM and you should be good to go
After Reset , enable USB ,
Go from your PC , ACTIVESYNC > FILE > CONNECTION SETTINGS > Put a check mark for ALLOW USB CONNECTION TO THIS DESKTOP COMPUTER
Same problem. MDAc boots in the bootlader with the backlit-off USB bootlader screen.
I gues I had a problem flashing the Radio ROM.
But: Startung the software update does not work. It reports a Error 114: "Telefon Update Fehler"
Is there anything else I can do?
Same problem. MDAc boots in the bootlader with the backlit-off USB bootlader screen.
I gues I had a problem flashing the Radio ROM.
But: Startung the software update does not work. It reports a Error 114: "Telefon Update Fehler"
Is there anything else I can do?
Hi,
My Typhoon phone is freezed on the splashscreen (Blue sky with Qtek).
I want to upgrade the ROM but at this step it don't connect to the laptop.
How can I put th ephone in bootloader mode ?
Thx
I didn't know that Tornado and the Typhoon are the same.
Well try this, Turn off the phone, Press the Camera Key and Insert the USB Cable, and that will get you to the Bootloader Mode
or
Why don't you just try a Hard Reset first and see what will happen.
Goodluck.
Please transfer this on the Typhoon Category. Thanks
My device is a Tornado. (I dont know why I said Typhoon)
Now I am in bootloader mode. How can i upgrade the ROM ?
Thx.
Well Done ! I put my Tornado in bootloader mode. I have upgraded the ROM.
I am waiting for the result.
Hi
My S200 after upgrade to WM6 can't load windows
Hang in the blue page (Qtek) before load windows
can i reloade WM5 on my 200? How?
this guy is my dear friend, he's got a G4 device, and has flashed the wrong wm6 rom on his device, and successfully broke it!
any solution/remedies would be extremely appreciated
Did you read all the instructions before flashing the device?
Try to get into the 3 color screen and reflash with an official ROM.
please help me simple, my english is very bad!
can i reload wm5?
try like this
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
bugmenot said:
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
Click to expand...
Click to collapse
my ipl and spl is 2.09.0001
if install this rom so upgrade that to WM6 have problem?
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
b-xenon said:
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
Click to expand...
Click to collapse
Reading it... your phone doesn't work anyway... so why bother?
do the upgrade!! ;-)
Thank's my friends
Hello XDA Nice Team !
By mistaken i wrote some file to my bootloader in my I-Mate Jam ..
That was after using the bad ROM : 2.03
it's the worst cooked version i saw !
Now my bootloader mode is working .. but no way to connect to PC with USB port ..
My computer does not recognize my Magican when plugged in bootloader mode anymore!
Bootloader Ver: 1.0
is there any way to fix or upgrade or restore original bootloader
Now i cant upgrade or downgrade my magican by any method
Noway to use successful connection with any roomupdate utility
Please help me to fix or restore my bootloader!
Thanks to any one read or replay or try to help or help me to resolve my problem
XDA lover
i'm sorry that happened mate...
i've had success with flash-from-bootloader attempts before, both on my Magician, when i accidentally flashed off of Vista and it'd enter the bootloader every week or on a reset using the reset hole, and also on my Wizard when i ignored warnings from WM5torage and it'd only enter the bootloader
what precisely happens when you connect to the PC, allow USB connections in AS/MDC, and let the phone enter bootloader however it does? i can just flash a rom from there, but i won't (iirc) get any reports of as recognising the device...
My experience:
1- when i plug my sd card into my jam .. usb not recognized in bootloader mood !!
2- when i use puty or roomupdate it reaches to USB> then when i type any command it does not respond !
3- i could do something .. i let my phone bootup and this i-mate logon screen stays 4ever .. i connected my ppc to pc and i could explre my imate by activesync ...
i could reach something .. when i explore my phone and remove everything from startup folder .. my phone boots .. and i can see start botton .. no touch alignment comes .. and everything works .. but.. screen is virtually reversed .. i can see the OK botton but i must click on the facing area and it be clicked ..
i think i executed some wrong hard SPL to my phone ant that happened >
is there any way to resolve this problem?
is there any way to erase flash on my I-Mate Jam????
is there any way flash my phone?
i also have prepaid JAFWM with pkey and USB cable .. no BOX ..
Help please!
that's messed up... howsabout flashing it at the point when the phone boots up? if there's an AS connection there, then it may work... i'd flash to an official rom though
Same problem , PLS Help !!!
Thx for help
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
If your magician isn't detected at ALL by your PC when plugging the USB cable into it (i mean, no new hardware; no unrecognized hardware; nothing is detected in your PC when you plug the USB cable), and unless you had previously made a SD backup of your entire Flash with this procedure ( http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash ), then your only option will be to build a JTAG diag cable:
Here are some general directions / ideias:
Magician JTAG pinout: http://wiki.xda-developers.com/index.php?pagename=MagicianJTAG
How to build/run the JTAG: http://wiki.xda-developers.com/index.php?pagename=DeadBoot
Photos : http://www.cf-box.com/htm_data/55/0912/1679.html
Some interesting stuff for debugging problems: http://pda2u.ru/ptopic205.html
For sure cotulla has one built so to test his ROMs + bootloader - maybe he will be willing to give you some directions if you run into problems, and above all, give you a prepared .nb0 (with the bootloader file) for your magician, which i do not know if there's one out there, extracted from an original ROM.
Anyway, you can always try and do it for yourself using itsme utilities. Follow this link: http://forum.xda-developers.com/showthread.php?t=218643
Regards
Keeper,you're awesome! I'm searching for JTAG,too
xiaojin1985 said:
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
Click to expand...
Click to collapse
Dear xiaojin1985 ,
Thx for your help, But unfortunately i tried your solution but it dosnt work !
Dear Keeper,
Thanks too for your help,
and i think the solution for my problem is one of the solutions you says ( How to build/run the JTAG: ) ,
but the pictures is not available anymore , so pls can you get the pictures ?
All the pictures are in here:
http://s218.photobucket.com/albums/cc23/alex_beda/ and in attachment there's a .mth file with all the pics built-in.
Don't take it wrong what i'm about to say, but in all honesty if you can't figure this out yourself (digging up the internet for the missing pics), i would suggest that you shouldn't try this, since this ain't easy at ALL...
Just to give you some ideias, it will require you to adapt your magician test point signals (TDO;TDI; nRESET; etc,)seen on the magician pinout pic to what is said; solder very thin wires (best done with a small hot air tip); fixate the small dip switch (micro switch) to be always on; keep the USB connected...idk... plus alot of other small details which ain't easy to accomplish.
Personally i haven't tried this yet but for sure it would work
If you decide to go ahead, please post some results!
Connection error solution
this is my problem
hi all. A friend of mine gave me an S100, and after i played for a few days with it, i decided to update it's rom. A "country error" problem appeared,cause i have the greek version, so i ran MaUpgradeUt_noID.exe which completed (as showed 100% process). My (new) problem is that i cannot update anymore. Every time i enter boot menu, i ran the upgrade
(HTCMAG_ROM_WWE_O2.rar) following all the steps normally. When the device resets (so the upgrade is going to start), it's re-reseting again and showing ERROR 101 connection error. Any ideas?
Qtek Greek version
R 1.12.00
G 1337.42
D 1.12.00 WWE
P.S. apart the problem everything is function properly
and the solution
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe radio_1.11_greek but idont reset the qtek in first screen
and upgrate downgrate start all ok
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe MagicianRadio_1.12.10. uk but idont reset the qteki n first screen
upgrate from radio 1.11 to 1.12.10
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run HTCMAG_ROM_WWE_O5_251209
everything is ok my magisian run the new Rom
here..........................
very newbie, help me please. i download magician radio, unzip it and copy it to my mini. knowing nothing, i press the enterBL.exe now my mini always in kinda bootloader state, dark screen and written serial v1.00 what should i do to get my mini back T_T help me please
Did you try resetting the device? (pushing the small button next to the headphones plug with the stylus)
thats the first thing i did, nope nothing
You should not copy it to your device...
Just hold Camera+Power+Reset,enter to SerialUSB Mode,connect it to PC with USB wire,run update.exe.
yes thank you all, now i have the WM 6.1 hehehehe ^_^