Related
Hello,
I'm trying to fix a problem in another thread and can not get MTTY to connect to my Tilt 8900. Is 1.42 the current version? Shouldn't USB be available in the list of Ports? I only have COM 1,2,3 & 7 available to choose and I have deselected "Allow USB connections" in Windows Mobile Device Center.
Once I get MTTY to connect, how does this program even work? Do I just type a command like 'boot' and hit enter?
Thanks for your help.
type USB when you go to select COM port.. (instead of com type USB)
I can't get adb to recognize my device (ViewSonic ViewPad 7).
On my device under Settings/Applications/Development/ "USB debugging" is checked.
When I plug in my USB cable I see two ongoing items in the task bar: "USB debugging connected" and "USB connected".
However if I then go into my Mac' (Mac OS X 10.6.6) Terminal.app I can't find the device.
$adb version
Android Debug Bridge version 1.0.26
$adb devices
List of devices attached
$adb get-state
unknown
Anyone have any idea what else I can try?
adamawolf said:
I can't get adb to recognize my device (ViewSonic ViewPad 7).
On my device under Settings/Applications/Development/ "USB debugging" is checked.
When I plug in my USB cable I see two ongoing items in the task bar: "USB debugging connected" and "USB connected".
However if I then go into my Mac' (Mac OS X 10.6.6) Terminal.app I can't find the device.
$adb version
Android Debug Bridge version 1.0.26
$adb devices
List of devices attached
$adb get-state
unknown
Anyone have any idea what else I can try?
Click to expand...
Click to collapse
Tap "USB Connected" in the taskbar. Tap "Turn on USB storage" on new screen that appears.
adamawolf said:
I can't get adb to recognize my device (ViewSonic ViewPad 7).
On my device under Settings/Applications/Development/ "USB debugging" is checked.
When I plug in my USB cable I see two ongoing items in the task bar: "USB debugging connected" and "USB connected".
However if I then go into my Mac' (Mac OS X 10.6.6) Terminal.app I can't find the device.
$adb version
Android Debug Bridge version 1.0.26
$adb devices
List of devices attached
$adb get-state
unknown
Anyone have any idea what else I can try?
Click to expand...
Click to collapse
happens the same here, but with windows 7.
have you both tried using the dual usb cable?
cheers
no, I'll try it as soon as I get view pad again. thanks
Sent from my Huawei u8800 using XDA App
I have a Tab 2 7.0, and I have my IMEI Erased.
Tried every method found in the forums but no luck.
I found that QPST or NV_write method can get my IMEI back but I am unable to connect my tab to PC
when I switch my mode to modem from PDA in *#7284# and connect to my PC
My PC detects its as 7cds + comneon Suspend and failed to install the drivers.
I've Kies installed but no luck
Switched USB port but result is same
switched PC but same
tried my friend's tab (same like mine) with settings USB->Modem to see weather there is problem with my USB but again no drivers.... i. e. no probs with my tab
Tried This method
You need to swith UART and USB settings:
enter UART mode with *#9090# and select "Log via UART"
then
enter *#7284# and select "UART MODEM" and select "USB PDA".
Now Windows ask normal samsung drivers!
Click to expand...
Click to collapse
but i don't have the "log via UART" instide I have "log via USB" which upon selecting gives me an error ""LOG PATH SET FAIL".
and then on selecting Modem on Diag menu gives me the same responce...
note: I dont have the DM+MODEM+ADB but only modem or PDA option... I guess it said to be "mux menu" for us.. correct me if I am wrong
Please Help me...
akshayjoshi1993 said:
I have a Tab 2 7.0, and I have my IMEI Erased.
Tried every method found in the forums but no luck.
I found that QPST or NV_write method can get my IMEI back but I am unable to connect my tab to PC
when I switch my mode to modem from PDA in *#7284# and connect to my PC
My PC detects its as 7cds + comneon Suspend and failed to install the drivers.
I've Kies installed but no luck
Switched USB port but result is same
switched PC but same
tried my friend's tab (same like mine) with settings USB->Modem to see weather there is problem with my USB but again no drivers.... i. e. no probs with my tab
Tried This method
but i don't have the "log via UART" instide I have "log via USB" which upon selecting gives me an error ""LOG PATH SET FAIL".
and then on selecting Modem on Diag menu gives me the same responce...
note: I dont have the DM+MODEM+ADB but only modem or PDA option... I guess it said to be "mux menu" for us.. correct me if I am wrong
Please Help me...
Click to expand...
Click to collapse
anyone???
I unlocked the bootloader and installed sdk manager and all things but my adb device is not being recognised I installed all the Htc drivers. The error shows "list of device attach but without any device id" and then it shows "no device found". I have attached a photo of the error.Someone help me out.
jawlekar said:
I unlocked the bootloader and installed sdk manager and all things but my adb device is not being recognised I installed all the Htc drivers. The error shows "list of device attach but without any device id" and then it shows "no device found". I have attached a photo of the error.Someone help me out.
Click to expand...
Click to collapse
Which windows version do you use? Have you enabled "USB Debugging"?
I m using windows 7. And yes I have enabled Usb debugging and also installed htc drivers still it isnt working
Have you tried a different USB port; one on the back? Or a different USB cable?
I am Sprint S5, and I want to add all lte and gsm bands to my phone but the problem is that qpst cannot detect my phone, I have done nearly every thing ,I rooted my phone then installed cyangenmod 12.1 update usb drivers done everything and my 5 days gone searching here and there still no fix .
I am here for a solution as well. Same problem.
Sent from SM-G900Pkltespr
Same problem here too. Search results don't seem to be helping so far.
Shows up fine in Odin3_v3.12.3.exe , run as administrator.
SM-G900P running "G900PVPU2BOD3_G900PSPT2BOD3_SPR", so Android 5.0 OD3, kernel version 3.4.0-4631307.
Phone set to "CDMA Modem" and "RNDIS + DM + Modem" modes, via dialer code "##3424#".
"USB Debugging" mode already turned on (but keeps turning off on every reboot).
SAMSUNG_USB_Driver.exe version 1.5.51.0 installed successfully on Windows 7 x64.
Phone shows in Devmgmt.msc as "SAMSUNG Mobile USB Modem" , driver version 2.11.11.0.
QPST 2.7 Build 4.1.1 installed successfully.
"QPST Configuration" > Ports > "Add New Port" , shows:
"COM1 - Serial (Communications Port)"
"COM3 - USB/QC Data Modem (SAMSUNG Mobile USB Modem, xxxxxxxx)"
"COM4 - USB/Unknown (SAMSUNG Mobile USB Serial Port , xxxxxxxx)"
Placing a checkmark in "Show Serial and USB/QC Diagnostic ports only" hides the second two.
But selecting any/all of those three results in the QPST Ports screen showing "No phone connected" for each.
Tried DEVMGMT.MSC > Right click "SAMSUNG Mobile USB Modem" > Update > Browse > "Let me pick" > "Show compatible hardware" checkmarked , which shows 4 results with same name. Tried each one, no change.
Any ideas?
---- EDIT 20170104 ----
Managed to get much further, after much research and many hours of messing around.
Unless I am mistaken, the option "CDMA Modem" (via dialer code "##3424#" , or "CP" via dialer code "*#0808#") just doesn't want to stick.
But the main problem now is that the communications connection just seems to reset or something after a short time.
My process:
Devmgmt.msc > modems > RIGHT CLICK on "SAMSUNG Mobile USB Modem" > Properties > Modem tab > Com port at top.
QPST Config > Ports > Add New Port > UNCHECKMARK "Show Serial and USB/QC Diagnostic ports only" box > Should be 3 ports, ignore COM1 and the same COM port as listed in DEVMGMT.MSC , use the remaining one.
Example:
COM3 is reported in DEVMGMT.MSC for "SAMSUNG Mobile USB Modem".
In QPST:
"COM1 - Serial (Communications Port)" --(Shows also when box is checkmarked.)
"COM3 - USB/QC Data Modem (SAMSUNG Mobile USB Modem, xxxxxxxx)"
"COM4 - USB/Unknown (SAMSUNG Mobile USB Serial Port , xxxxxxxx)"
So add COM4, (Also, optionally: Right click COM4 in the "Ports" tab of the main QPST window and click "switch modem port to diagnostic mode").
Then "Start Client" menu > "Software Download" option > new popup window happens > "Backup" tab > Input the SPC (MSL) code in the box ("000000" gave error: "SPC given could not unlock the phone", so called Sprint and got the real MSL / SPC code) > "Start" button > then always at 12% comes "Status: Memory Backup Failed" and "Errors: Could not Communicate in Diagnostic Mode".
Close QPST Configuration program.
Open QPST Service Programming (ran as Administrator) program.
New phone connection > select phone > "retry" a bunch of times > "UMTS System" tab > "Read from phone" button > prompted for MSL, so I put in the MSL > wait > "The phone has stopped responding to memory read/write commands".
So the problem appears that the communications connection seems to reset or something after a short time.
Any ideas?