Hi all,
Dialpad input is not available after I installed WWE rom on MDA compact II. Can anyone help me with this?
Also I am not able to hard reset the above mentioned gadget. I press pwr and reset and it simply resets.
Any ideas?
Thanks
Andrew
zsizsi said:
Hi all,
Dialpad input is not available after I installed WWE rom on MDA compact II. Can anyone help me with this?
Also I am not able to hard reset the above mentioned gadget. I press pwr and reset and it simply resets.
Any ideas?
Thanks
Andrew
Click to expand...
Click to collapse
To hard reset, run Clear Storage in Settings>System or hold down the camera and voice buttons on the left side then push the reset button. Keep holding the 2 side buttons (not the reset as well) until your asked to reset by pressing send.
Hi, what do you mean by NOT AVALIABLE?
It is missing?
what kind of Rom is it? Is it a big storage WWE rom?
If it is the case, you will have to find the CAB file of dialpad in the extended rom.
Related
Hey,
I can't remember how to do an hard reset, and I don't have my user guide with me. Need your help
Thanks
OK, found it : Press the two softey (up to Windows and OK button) and reset.
how is making a hard and a soft reset on Qtek S200 ? which button combination ?
Soft reset is just putting the stylus in the little hole. (It's like a reboot on a PC)
Hard reset (deletes all data and restores factory defaults) is done by holding power + camera + comm manager buttons while pressing reset.
fuhayer said:
how is making a hard and a soft reset on Qtek S200 ? which button combination ?
Click to expand...
Click to collapse
Sorry but the info you look for is in the Wiki... I think you could've go there, as this forum is full of threads asking the same old things...
Hi,
Newbie here....A pola200 came to me for password...incoming and outgoing call working..how ever there is a password..wats the best way to remove the password...Or how do i go abt hard resetting it
Thanks in advance
cliffrock
Well as i see there is no one answering me the question....
I found my own solution:
Hard Reset:
On the 02 Orbit2, make sure the phone is powered on and then press AND HOLD the Windows and OK buttons down at the same time, THEN use your stylus to press AND RELEASE the reset button (while you CONTINUE to hold down the Windows and OK buttons). You should get a grey-ish/white screen explaining how to complete the hard reset or how to cancel the operation.
If you cannot see anything on your screen due to the OS being totally messed up (in other words, as long as it's not hardware failure), then you need to put your device into bootloader mode (4-color screen) so that you can flash the ROM (either what you already are using, or a newly cooked one - either way you need to have a ROM image file on your computer to complete the flashing process).
Bootloader Mode:
To enter bootloader mode, press AND HOLD the camera button and then press AND RELEASE the soft reset with your stylus. When the screen is showing the 4 color bands, plug in the USB cable between your computer and phone flash the ROM.
Click to expand...
Click to collapse
Br
cliffrock
Thanks man, working good.
Very thanks
Today i installed the Ezinput 2.1 on my phone, so i reboot. Then i find my phone not booting which means hard reset. So i go on the bootloader and hard reset and it says something about no image. Then i rememeber something would of affect it probably the HTC Asian Characters Support i installed before which made the phone recognize i had a CHT ROM instead of a WWE ROM when you go to 'Device Info '. So hopefully some people who has experience to be kind enough to help me please. Thanks in advance.
[email protected]
You dont hard reset lyk that, your device thinks your trying to flash a rom image thats why its saying that
HOLD VOL DOWN, THE ROUND OK BUTTON AND PRESS THE RESET BUTTON
hi guys having problme on my xda zinc it has user lock i m trying to hardreset but not let me do it what to do?
To perform a hard reset, use the stylus to reach the reset button found besides the device's camera button. Keep the stylus on the reset button and press the Up Navigation button at the same time.
*Note: Hard resetting the device will cause the device to be reset back to its original default settings and all data will be lost
Click to expand...
Click to collapse
i try like this but phone restart stil has lock code