Related
Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz
Hi,
Newbie here....A pola200 came to me for password...incoming and outgoing call working..how ever there is a password..wats the best way to remove the password...Or how do i go abt hard resetting it
Thanks in advance
cliffrock
Well as i see there is no one answering me the question....
I found my own solution:
Hard Reset:
On the 02 Orbit2, make sure the phone is powered on and then press AND HOLD the Windows and OK buttons down at the same time, THEN use your stylus to press AND RELEASE the reset button (while you CONTINUE to hold down the Windows and OK buttons). You should get a grey-ish/white screen explaining how to complete the hard reset or how to cancel the operation.
If you cannot see anything on your screen due to the OS being totally messed up (in other words, as long as it's not hardware failure), then you need to put your device into bootloader mode (4-color screen) so that you can flash the ROM (either what you already are using, or a newly cooked one - either way you need to have a ROM image file on your computer to complete the flashing process).
Bootloader Mode:
To enter bootloader mode, press AND HOLD the camera button and then press AND RELEASE the soft reset with your stylus. When the screen is showing the 4 color bands, plug in the USB cable between your computer and phone flash the ROM.
Click to expand...
Click to collapse
Br
cliffrock
Thanks man, working good.
Very thanks
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
squiros1976 said:
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
Click to expand...
Click to collapse
Do entering bootloader : http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#bootloader (With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Already tried that...
erwinpiero said:
Do entering bootloader :
(With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Click to expand...
Click to collapse
That´s exactly why i ended with the phone stuck at the first time... i recently got this phone and i wanted to see the bootloader version and stuff to do a firmware update but now it´s just there all the time. Not even being recognized by the pc.
Thanks.
Had You try flash via SD Card?
erwinpiero said:
Had You try flash via SD Card?
Click to expand...
Click to collapse
Well, no, i don´t have an sd card available now... one thing i forgot to say is the phone, after it is on that screen, never turns off again unless you remove the battery... and yes, i have left it on for a day, same thing...
What is the procedure to do the sd card flash thing? it that needs to get to the tree-color screen forget it... that´s exactly what the phone doesn´t do...
Thanks.
Sergio.
Hello Sir, to flash using SD card, you can read it here http://forum.xda-developers.com/showthread.php?t=448008 see number 5.
HTC Fuze
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
nessab04 said:
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Interesting... i´m not the only one with that problem then.... code doesn´t do anything... still same screen....
...no bootloader...
erwinpiero said:
Hello Sir, to flash using SD card, you can read it here --- see number 5.
Click to expand...
Click to collapse
Hello,
Ok, well, the main problem here is that i can´t get into bootloader... the phone is stuck at the fist "Touch pro" screen and nothing else happens...
Anyone with a clue on this? is this phone bricked then...
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Finally got bootloader...
the-wrangler said:
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Click to expand...
Click to collapse
Finally, after several tries it got into bootloader... now the thing doesn't end here because for some reason when i try to upload the Raphael Hard_SPL the phone goes ok to 0% and in about a minute a communication error appears and that's it...
We are moving forward... at least.
Bootloader Info.
Tried to flash via microSD but the phone says not allow..i guess that's because the hard SPL is not installed and it has the stock... here's what the bootloader shows, i'm not being able to install olinex hardSPL...
RAPH100
SPL-1.94.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
ideas?
...no way to flash it back....
so... i guess there´s no way to get this back into business... when trying to flash always reports communication error at 0%...
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
ya i just noticed the RAPH100 in his info he posted and the t7272 in the header..mines a RAPH800 and bootloader HAS to have vol + power..anyway, i remember having an issue with something similar with my old vogue..have you tried flashing the shipped stock rom back on? if not, try flashing the stock back on it and if it goes, then try the unlock afterwards. dont fret bud, someone here will get you sorted out
here, i found this as im not well versed in raph100s. its a chart with raph100 roms. im sure some must be shipped stock roms and may be worth a try. sorry i couldnt help more, like i said hopefully someone who knows your device better may be able to help
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
How about flashing official ROM via microSD card?
patrick_spd4u said:
How about flashing official ROM via microSD card?
Click to expand...
Click to collapse
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
No way to flash HardSPL...
Hello, thank you for your help! in fact the volume down+reset works perfect to get into bootloader but every time i try to flash hardSPL or stock rom via USB it says "communication error" and the phone displays a 0% bar...
Windows7 is detecting it as HTC USB Sync.
Thanks..
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
...will try it again...
Hi
In fact the most close to the rom i had on that cell is ruu_signed_1.90.401.1_wwe, downloaded it and will try it again later using sdcard... one thing i wonder is the SPL version which is 1.94.00.00 on my phone.
Sergio.
freakzone said:
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
Click to expand...
Click to collapse
Hi all,
after installing volDeus BG tweakv 0.5 my phone died. i can't restart it and i can't perform a hard reset. i also tried the red reset button from the back - nothing. it's not even charging. i tried a different battery but didn't solve the problem. any help would be appreciated. i don't want to send it back for repair.
It happened to me after manilla, i made this factory reset and after that the phone worked fine.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
thanks for reply. like i said, i can't perform a hard reset because the phone is not responding. when i press the volume up, down and power button nothing happens. i don't know what to do.
Ahhhhhh.. me 2
My hd was dead during flashing and still not working but a good thing......
I bought a new HD2.
But if some one have an idea plz let me know.
Thanks in advance
l3onard said:
thanks for reply. like i said, i can't perform a hard reset because the phone is not responding. when i press the volume up, down and power button nothing happens. i don't know what to do.
Click to expand...
Click to collapse
If you're unable to perform a hard reset with the hard keys as explained above, you don't have any other choice but to send it in for repair as far as I know...sorry.
I'd suggest first taking out the battery for a couple of hours and then try again.
de Wolfe said:
I'd suggest first taking out the battery for a couple of hours and then try again.
Click to expand...
Click to collapse
i'll try this. thanks.
de Wolfe said:
I'd suggest first taking out the battery for a couple of hours and then try again.
Click to expand...
Click to collapse
l3onard said:
i'll try this. thanks.
Click to expand...
Click to collapse
Also try this;
1. Remove the battery
2. Plug the USB cable to your computer and to your HD2
3. Push and hold volume down/up
4. Insert the battery
Normally the HD2 would start when doing this.
wardh said:
Also try this;
1. Remove the battery
2. Plug the USB cable to your computer and to your HD2
3. Push and hold volume down/up
4. Insert the battery
Normally the HD2 would start when doing this.
Click to expand...
Click to collapse
thanks but it's not working. maybe because i deactivated charging when connected to PC.
with the combination volume -, reset and power i managed to enter the bootloader. anybody help me to go on pls?
l3onard said:
with the combination volume -, reset and power i managed to enter the bootloader. anybody help me to go on pls?
Click to expand...
Click to collapse
1. L3nny, for future reference, Co0kie's Home Tab v1.8.5 already has the voldeus skinning function built-in, so there's no more need for it in the future... but since you've got it now... calm down and bear with me here...
2. Voldeus' skinning does not mess with your rom image at all, and any changes can be reversed with a HardReset (i've been there and done that). A HardReset does take 3 hands and a few tries to get it for the first time. The red button on the back is only a SoftReset, same as taking the battery out, so that's not gonna work. And since you've just seen the bootloader now, your previous HardReset attempt probably didn't have the correct buttons combination, so it never worked. Try again using this combo from TBoy2000's HowTo thread: remember it's pressing volumeUP AND Down together AND Power button. you need three thumbs
tboy2000 said:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
good luck
atlaswing said:
1. L3nny, for future reference, Co0kie's Home Tab v1.8.5 already has the voldeus skinning function built-in, so there's no more need for it in the future... but since you've got it now... calm down and bear with me here...
2. Voldeus' skinning does not mess with your rom image at all, and any changes can be reversed with a HardReset (i've been there and done that). A HardReset does take 3 hands and a few tries to get it for the first time. The red button on the back is only a SoftReset, same as taking the battery out, so that's not gonna work. And since you've just seen the bootloader now, your previous HardReset attempt probably didn't have the correct buttons combination, so it never worked. Try again using this combo from TBoy2000's HowTo thread: remember it's pressing volumeUP AND Down together AND Power button. you need three thumbs
good luck
Click to expand...
Click to collapse
hard reset is not working. i don't think i do it wrong, because it's not the first time i try this.
i copied shell32.exe and aygshell.dll from voldeus' post an dput it on my sd card. i chose some settings, chose the wallpaper and soft reset. but the phone froze at start-up. i put out the battery and from that moment, i couldn't do anything.
if i can enter the bootloader does it mean i can install HSPL and maybe a stock or custom ROM? but if something goes wrong i loose my warranty!
please help me guys, i'm lost.
1) Maby your battery charge is too low ( maby, your usb port is broken and charging is not ON)
Try to connect your HD2 to charge
Its will be better if you will go to service centre.
sorry for my bad English
l3onard said:
hard reset is not working. i don't think i do it wrong, because it's not the first time i try this.
i copied shell32.exe and aygshell.dll from voldeus' post an dput it on my sd card. i chose some settings, chose the wallpaper and soft reset. but the phone froze at start-up. i put out the battery and from that moment, i couldn't do anything.
if i can enter the bootloader does it mean i can install HSPL and maybe a stock or custom ROM? but if something goes wrong i loose my warranty!
please help me guys, i'm lost.
Click to expand...
Click to collapse
Is your machine tied to a certain provider? If it is send it back and get a new one.You obviously have a faulty machine.Easy way to bootloader,
Hold volume down.
Take off back.
Press red button.
Bootloader appears flash radio or ROM
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
l3onard said:
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
Click to expand...
Click to collapse
New phone definitely.
l3onard said:
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
Click to expand...
Click to collapse
I dont know but i think that: to flash a new ROM you must enter in bootloader.
It is better to change a device for the new
Its a critical problem. This problem can appear again even if you repair your phone.
If you have official guarantee - you must change your device ( go to your service centre )
DUDE!~!!!!~! You're already in bootloader, just flash your original orange STOCK ROM already and be done with this!!! ALSO, you MUST take out your SD card, since that maybe the problem to begin with (having your core system files at the root of your SD is not a smart idea). If that DOESN'T work, then send the damn thing back to Orange for an exchange! Your choices are really simple, why are you wasting everone's time with this!
Good luck
i just wanted your opinion about my problem beeing a beginner in WM phones. i think always is better to ask a second opinion, especially when you are a newbie. if i wasted someones time i'm sorry.
anyway, thanks for the answers. i'll send it back to orange.
I wouldn't send the phone to repair.
1. enter bootloader-mode
2. mtty task29 search forum
3. enter bootloader again
4. flash orange original rom
5. after flashing perform a hard reset
hi all,
heres the deal. i rooted my defy with superoneclick, it worked great.
heres the problem and what i think is the cause but i need a solution!
PROBLEM: i switch my phone on, it starts normally
motoblur screen
then
T mobile screen
then
the normal swipe unlock
i ulnlock it fine but as soon as i do the wallpaper dissapears/goes black. i cannot access any apps. none of the buttons work (menu,home,return/back,search) but the info bar/ menur bar thing at the top that swipes down works fine and what ever is in it works fine i.e when i plug into usb im able to choose portal and tools and those other 3. but when i just leave my phone on lock then press power button/activate unlock screen. it will show normal background with time and everything looks normal.
the CAUSE ( i think )
i was installing apps and deleting motoblur stuff. but it it was one of those two, i isntalled an app and i deleted a file at the same sort of time. the app installed was some startup app killer or a firewall of some type. or it could have been that i deleted an apk file that had a real short name i think, like blur.apk
PLEASE HELP ME. I need a solution FAST its my first smartphone ever and i paid alot for it. if you need my phone info it was
moto defy android 2.1 uk version but then rooted with super one click
THANK YOU IN ADVANCED FOR ANY HELP
ps i have installed rsd lite and it is recognised by it but thats as far as i know what to do...
Did you get my PM lol saw you in the other forum.
try to do a factory reset on the phone from the recovery menu. if anything, reflash your rom or pick a new one. I had this issue with a few mods/roms/kernals aswel.
sgtagem said:
Did you get my PM lol saw you in the other forum.
try to do a factory reset on the phone from the recovery menu. if anything, reflash your rom or pick a new one. I had this issue with a few mods/roms/kernals aswel.
Click to expand...
Click to collapse
i sent you a pm too. thanks for being so quick to reply. but i dont know how to do that stuff im a noob this is my first androidsmartphone ever but im a very quick learner
all good. For my phone. ( droid incred.) when the phone is off i hold power and the volume up key. then i select recovery using the volume keys. I know the buttons to push are different on some phones so you might neeed to use google to find the right 2 keys to hold down while booting
i currently have it in boot loader mode, it says battery ok, ok to program, transfer mode, usb. and thats all it says. no recovery options at all
Ok, found this in another forum. this is how to get into your boot menu i guess:
The boot menu happends when you press the volume down key and the power button.
When it takes you to the triangle part press the volume up key and the power button this action brings up another menu on which you can reboot and other settings.
the first triangle with exclamation mark inside it with the lil andorid man comes up, but the second menu doesnt, im holding vol down and power to get up this image, the to get second one you say to do vol up and power...i tried it, held it for a while but still no joy
ok, give this a try
"If you swipe the bottom right corner when you see the triangle you will get a menu. From there you can reboot or reset"
Still looking for more
nope sorry still dont work. i really appreciate you spending your time doing this it realy does mean ALOT. thank you i hope the solution isnt far away!
Ok, this is from the t-moble forms:
One suggestion...
Pull the battery.
Hold down the volume down key and press the power button.
Continue to hold the volume down key until you seem something happening on the screen.
This should boot you into recovery mode, you'll see a little green Android stood next to a yellow warning sign.
Press the bottom-right corner of the screen, a menu should appear.
Use the volume keys to scroll up and down.
Scroll to 'Wipe DATA/factory reset' and press 'ok' (bottom-left of screen) - you may need to re-confirm in a sub-menu.
After the wipe completes, scroll to the 'reboot' option and press 'ok'.
If you do that, you completely wipe the handset, same as if you performed a full factory reset on the handset.
Obviously, this will get rid of anything you have on the handset but if your only other option is an exchange, you've nothing to lose really.
http://support.t-mobile.co.uk/discussions/index?page=forums&topic=801038121b7ab9012dee673eff007b6f If you wanted to look. its the 2nd guy down. issue has nothing to do with this but same steps
it says it worked that it did the reset properly but still same original problem.
it says first line....
E:cant open /cache/recovery/command
that is in the recovery mode / reset
do you have a rom that you can try to flash? any rom really just to rule out a rom issue. you can try to find a rom here: http://forum.xda-developers.com/forumdisplay.php?f=855&order=desc&page=1
im going to give it a try ill get back to you to let you know how its going within the next 20 mins, thanks for all your help
here is an option for a factory reset.
1. Turn the power off on the Defy (if it's frozen, pull the battery out & reinsert it)
2.Hold the volume down button
3. Press and hold the button until the device turns on
4. You'll get a menu that allows FASTBOOK, RECOVERY, CLEAR STORAGE, and SIMLOCK
5. Select CLEAR STORAGE, by pressing the Volume Down button
6. Press and release the Power
7. Now just confirm your decision Volume Up for YES, Volume Down for NO
it says on rsd lite . fail flashing process. unable to retrieve initialization values from INI (0x07029);phone connected
isnt working for some reason
that menu...mine says
from top to bottom
Android system recovery <2a>
reboot system now
apply sdcard:update
wipe data/factory reset
wipe cache partition
(then at the bottomit says...)
E:cant open /cache/recovery/command.
but yet it will still go through the process like it is working but it doesnt fix it
Did you try the top option. Android system recovery <2a>
i wish i had that same phone to replicate this problem
im sorry i didnt write it clear enough the top android recovery thing isnt an option, its like the header/title for the program or page its written in red. the options to choose are in blue