i have a ppc6700 and im here because alot of the forums i keep reading alway has a link to this site. it seem to help out alot of people, so im here woundering if any one knows where i can find the registry for the record hard button.
this is my problem. i have removed the junkware and some registry hacks to the ppc6700. when i did this, i asigned voicedial to the record hard button but instead of going to voicedial. it goes to wireless manager, the button setting show it's asigned to voicedial but i just dont understand why it doesn't go to it's asigned app or how to fix it.
djmadclass: I don't know if this is directly related, but one of your PPC6700 friends had a similar problem.
http://vijay555support.host4phpbb.com/viewtopic.php?t=29
V
no but it's a start, thanks.
Related
hey guys
have an i-mate SP5 which i was using last year (i've since upgraded to a Palm Treo 750). the reason why i stopped using it was because the far right soft key wasn't working.
i've tried hard-resetting the phone to no avail. every now and then it works then drops out... so i can't access any menu functions at all.
does someone have experience in opening it up? i thought maybe a cleanup might fix the problem... or maybe something's preventing the button from making contact with the board...
or shall i just pay someone to do it?
Right soft key not working? You might need to clean up the keypad, someone in modaco posted a tutorial
http://www.modaco.com/Mate-SP5-Tornado-Disas-t241033.html
As variant: Try AE Button Plus. By this program you can remap your button.
Hi guys
When I connect the phone with the usb cable activesync makes a BEEP every 5 minutes. I cannot find the registry key to disable this. Anyone know it?
BTW i'm trying to disable the BEEP when I press the red HANG key. I know the sound played is "dpadctl.mid" and I disable it on all the registry keys it appears, reset, and is still making that sound everytime i press that key.
It might help a little too if you told us what Phone Device you are using and what ROM/Radio you are using.
I don't think it helps too much since the registry keys for events are the same for all windows mobile phones with WM5 and WM6.
I got a TyTN (HERMES 200) with Super D-Lite ROM.
Please close thread.
I found the solution disabling the active sync sound. (well, that's more a workarround than a solution)
And for the HANG KEY i found more registry keys with the sound. I previously missed it cause i searched '\windows\dpadctl.mid' and not 'dpadctl.mid' directly.
I hope this is usefull for somebody.
Hey Man Im Having The Same Exact Problem On My T-Mobile Wing How Do I Disable That I Only Find That dpadctl Sound in Windows File Explorer windows/ Can You List A Step by Step to Disable It ?
Hey guys,
I'm clearly a newbie here, been so for sumtime trying to learn while looking for tweaks and solutions, and I've been trying not to post so that I don't stupidly ask answered questions but unfortunately I have a problem that I need urgent fix. I've tried to search but haven't found what I need.
So here it is:
When I receive calls, the caller id and number seemed to be crunched together and unreadable under 1 line instead of usual 3 or 4. So I cant see who is calling me or from which number. This is rather important for my business to decide who to ignore and who to address properly.
I hope somebody can help me fix this.
For added info, I have made few registry changes and the last ones involve changing soft keys 112 and 113, and also installing HTC action screen before this problem.
Thanks guys!
I've never heard of this problem occuring, but I would recommend you skip stright to it and hard reset your PDA.
Backup all your files by connecting your PDA to your computer and copying over all the files you want to backup.
To backup all your PIM data (appointments, contacts, messages, call logs, speed dials and tasks) use a program called PIM Backup - details of this program can be found on this thread - Click Here
To hard reset a HTC Polaris, insert your stylus into the softreset hole and press it whilst pressing the 'Windows' and 'OK' buttons. Let go of the buttons 1-2 seconds after taking out the stylus. The send button is the green pickup call button, which you will be required to press to confirm you want to go ahead with the hard reset.
Hope this helps
I was hoping I didn't need to resort to that but I guess if that's the quickest easiest way.
Thanks for your help!!
Btw, which buttons do you mean by "windows button" and "Ok button" ??
Sorry thats the only thing I can advise you to do, but at least you will know that its probably the second best thing to do (apart from re-flashing the ROM).
Regarding the 'Windows' and 'OK' buttons, it is my bad that you probably cannot find them - the XDA Orbit 2 has these buttons, but the HTC Polaris has the 'GPS' and 'Internet Explorer' buttons instead. Basically, they are the two buttons under the pickup and hangup buttons.
Attached is a picture which may help you further.
Hope you get this problem sorted out.
I know this may sound stupid... But I just received the HTC touch fuze from at&t and it doesn't seem to have that special interface which it should have. It's just a simple list like the windows mobile interface. I tried changing the themes and whatnot but i'm going no where. I think I'm missing the touchflo 3d? Is there a way i can reinstall it?
try flashing a ROM or hard reset? or taking it back to the store?
hellonaty said:
I know this may sound stupid... But I just received the HTC touch fuze from at&t and it doesn't seem to have that special interface which it should have. It's just a simple list like the windows mobile interface. I tried changing the themes and whatnot but i'm going no where. I think I'm missing the touchflo 3d? Is there a way i can reinstall it?
Click to expand...
Click to collapse
Try going to settings items and make sure TF3D is checked.
A little detail
Press Start>Settings>and press Today icon > click the Items tab on the bottom and then make sure that Touchflo is checked and nothing else. Close by pressing OK and see if that launches Touchflo.
Okay, after the hard reset, it works. I think it's because i was too eager to use it so i didn't let it load all the way. But now i have another issue. The keyboard just randomly stopped working....?
I press the power button to turn the screen black and turn it back and then the keyboard works for like.. 5 seconds? What is going on!!!
Hello all. Does anyone know how to remap or change the PTT Button on the ATT Fuze. Under Settings/Buttonsrogram Buttons Tab I only have "Button 1(hold)" listed and not the PTT buttons as I have seen in several screen shots posted on this forum. I have the stock ATT Fuze ROM installed.
Any help would be greatly appreciated. I have used the forums search function looking for this answer and have had no luck.
no way unfortunately. Unless a third party mapping program.
Actually you can! But it requires a bit of registry work. Check it out at: http://www.fuzemobility.com/?p=598
on stock rom it just involved deleting the ptt app and making two shortcuts in the windows folder for short and long pressing. i have da_g's clean fuze rom and on it theres the ability to easily change all the shortcut buttons provided by xcsdm. its not to hard and worth doing.
Here's a cab that will enable you to reassign the ptt long and ptt short button presses in Settings>All Settings>Personal>Buttons
->Clicky<-
see thats what im talkin bout.
yea Da_G's roms have this built in by default.... VERY sweet.
The only buttons missing are the Volume buttons, Home and Back.
Go to http://www.fuzemobility.com/ and type "ptt remap" in the search field on the right side. This was discussed and solved at least 50 time!
Thank You all for your help. I guess I was just using the wrong keywords when searching this forum. I never checked fuzemobility, I will start doing that in the future as well.
Thank you all again for your help.