HI,
I have been trying to connect to the internet on my Jam but via a Bluetooth connection to my Sony-Ericsson K750i.
I need to do this because my company pays the bill on the SE phone and I don't want to have to pay to download my email!
I can connect successfully from my old Palm (which I don't use anymore), from my laptop (which I don't want to carry) and from an O2 XDA Exec (tried in an O2 store) but not from my Jam.
Is anyone else able to do this? Or is it a restriction of Windows Mobile 2003 SE?
Thanks in advance
xerxes
How about putting the K750i sim into the Jam when you want to check your email? That should work.
That does work but I'm trying to get my Jam to automatically connect to the phone and download my email every 60 mins.
Also, I'm interested to know whether PPCPE 2003 SE has been limited in some way to prevent the user from making a connection via an external phone.
I've also noticed that I am unable to dial over bluetooth from Pocket Informant, while my mate's Ipaq can dial my phone with no problems.
xerxes said:
That does work but I'm trying to get my Jam to automatically connect to the phone and download my email every 60 mins.
Also, I'm interested to know whether PPCPE 2003 SE has been limited in some way to prevent the user from making a connection via an external phone.
I've also noticed that I am unable to dial over bluetooth from Pocket Informant, while my mate's Ipaq can dial my phone with no problems.
Click to expand...
Click to collapse
I know exactly what you're talking about. I can tell you what, though. WM2003SE does not have a limitation you're thinking of. At one time I was successfully using my girlfriend's Nokia 6681 as a BT modem for my Magician, taking full advantage of the EDGE network. It was working fine. The sad part is that it doesn't now for some wierd reason. So it can work. But for now I have yet to figure out (again) how to make it work. Maybe there is a conflict with some software, like that A2DP patch. But I think I tried it also right after a hard reset. No go.
I also tried it after a hard reset - with no better result.
I was wondering whether it might be an issue with Bluetooth on the K750i as I know it also has a problem with some headsets but if you have seen the same thing occuring with a different phone I guess it must be a PPCPE problem.
use pocket bluetooth tools
I've been using this software for about 4 months, and it works fine for my mini. I'm using a nokia 6255 bluetooth modem cdma as a bluetooth modem cause the internet rate is cheaper than gprs
Related
As can be seem above, im having mucho trouble pairing successfully with my XDA2s (Win Mobile second 2003 edition ver 4.21.1088 (build 14132)
(The receiver is fine as I have paired it with other devices) It picks it up in the wizard on the xda but with a question mark against it and when I try to go to the next stage it keeps saying service discovery was unsuccessful
Any ideas?
let the receiver drain totoally then the recharge it fully an try again
as a metter of interest what makes u think that will work? It wont work even with the power supply plugged into it?
Could it not be the software on the xda2s as it wouldnt work on my friends identical model either.
I did have a rikaline 6031 x7 which worked no problem on the xda2s though
Strange and stranger
It might work because: By draining the GPS, it resets to factory defaults.
This is the only way ie. to get a Holux GR-230 / DConnex DC-230 come back to live when you acidentally messed with baudrate & protocol at the same time (on some GPS Rom versions that is).
Nope, that didnt work either, its still showing on the xda as having a problem
Just a thought but have you enabled the Receive all Beams function under the connection tab ? :?:
disabling the "receive all incoming beams" is only applicable when using COM1 (ie via a wired GPS).
BT GPS's mostly (standard anyway in ROM 1.72) connect via COM5 (the outbound port).
Also: try the Blue Angel (the XDA2s is a Blue Angel right?) forum
Make sure you download the latest GPs driver for the XDA series from the tomtom website. Worked for me.
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Guru Meditation said:
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Click to expand...
Click to collapse
Hi, which version of WM6 did you use? Also, have you got MDS working yet?
Hi,
I tried bb connect 4 on WM6, Laurentius WM6 Pro Business Release V7
it didn't work...
somebody knows how to run BB connect??
thx
blackberry connect WM5
Wondering anyone got luck getting bb connect to work on HP IPAQ hw6955?
I have tried few bb connect version but none of them worked it is stuk in Pin Pending. Anyone knows of a fix or knows if HP been test please let me know.
Thanks in advance
BB Connect - Desktop won't connect to device
I was trying to get my Universal to connect to the Blackberry Connect Desktop for Window Mobile Devices. I followed the install guide and from what I can tell it seems like active sync is still blocking the device from talking to the blackberry software. When I disable the USB connect option in activesync the device cannot be seen from the laptop at all.
I am using BB desktop software is 4.0.0.17 and BB connect software on device is 4.0.0.67. Active sync is 4.5
My understanding is you has to activate using the desktop method and it can not be done wirelessly. I did try wirelessly and I get Service: "not connected".
Any help or ideas are appreciated.
Blackberry Desktop Manager USB Driver
Wrong forum, sorry
on some devices you have to go into the registry and change the AKU to 0.4.2 can someone verify I am scheduled to pick up a Universal this week and need bbconnect capability
I love the phone but I cannot believe that its so hard to sync with Vista via Bluetooth. It has the latest mobile software and vista is the new OS, how can they **** things up so badly?
I know there are some issues with the Sony Vaio Bluetooth stack. Its super confusing and the Bluetooth settings are hard to find.
Is it actually possible to Sync with Bluetooth to vista from WM6? Has anyone got this working?
Thanks, even a yes or no would be great here, so that I know if I'm wasting my time.
Ben
I did. After connecting my TP to the PC via bloetooth, i synced them, but using the phone's ActivSync, and not the Windows Mobile Device Center.
You need to go to your phone and instruct a "bluetooth activesynce".
It worked fine for me and my Vista SP1, using a dead-cheapo USB-bluetooth adapter.
Got it working too. Paired the 2 devices and entered passcode. Then started AS on the phone and selected Connect using BT and off it went. No problems what so ever.
Its good to hear that it works for people.
I think its an issue with the Sony Bluetooth stack. I can pair the devices but the device doesn't show that the laptop has activesync, just wireless stereo. I think I might hate Sony more than Microsoft, Mac next time for sure, so so sick of Vista and spending a week online working things out.
Its a long shot, but I don't suppose anyone has it working on a Sony Laptop with Vista?
Thanks for the replies and listening to me moan.
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
Did you try this https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=2382825&SiteID=65
I had the same problem with my VAIO TZ and my Tytn II, didn't try with the TP yet.
Apart from replacing the drivers, I seem to remember there was a trick related to changing the COM Port or something (the default port was incompatible with Activesync) but I'm afraid I don't remember. I'll give it a go when I have time to connect both, but it may not happen until I getmy new laptop.
EDIT: forget the above, that's the trick I half remembered (and used): http://forum.xda-developers.com/showthread.php?t=397419
i have the same problem with Toshiba laptop..i have tried everything
remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
If this is the case, try adding comm port for both your laptop and tp. Outgoing for TP and incoming for laptop. Then you need to set Windows Mobile Center to connect via COM?? (?? is the number you've chosen)
ActiveSync connection (via bluetooth) is actually a comm port connection.
lbhocky19 said:
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
Click to expand...
Click to collapse
Try removing the pairing and rebond.
It also works fine for me with Vista (non-SP1), newest version of Mobile Center, and a Bluetooth dongle with Microsoft stack.
This worked for me
I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.
NB: There was no need to reinstall any software or windows operating system (as some other posts on other websites have suggested)
I still cannot get this to work. I couldn't on my Sprint Touch and now I can't on my Touch Pro.
I have Vista Home Premium SP1 with WMDC 6.1
Computer was formatted to factory settings today. Touch Pro is new as of yesterday.
I paired the phone to the computer and the computer to the phone. ActiveSync was a profile available for the computer and I made sure it was ticked.
I plugged in the phone via USB and set up the partnership. All is good there.
When I open ActiveSync on the phone and click "connect via bluetooth" it tells me it cannot open the port.
This is the exact same problem I had with my Touch. The computer is newly formatted and isn't communicating with any other bluetooth device at all. How can the port not be available? I've tried the regedit. Tried making incoming ports on the computer. No avail. However, I cannot make new outgoing ports on the phone. The tab is there but no option to do so.
Any help?
Thanks in advance
EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
P/S :- BTW i just bought my HTC TP 2 weeks ago ...
woks perfectly!!!
many thanks.
Hi all,
I have searched and searched the forum and the internet but can find no answer to this issue.
I'm using an HTC Touch Dual (Neon 200) that I had set up to connect to my PC via bluetooth for Activesync.
No problems there, it all worked fine. The issue comes with my attempts to automate the synchronization. I had found and successfully used a program called CT Scheduler to start the bluetooth radio and then instigate the "Windows/repllog.exe" file to start a bluetooth activesync.
In Activesync, on the Touch, I go to "Menu-->Connections--->when cradled, synchronize all pc's using.........."
I had the option to select "`USB" or "`DIRECTORSOFFICE" (the name of my PC).
Now, I have no idea how the "`DIRECTORSOFFICE" option got there but I selected it and it all worked fine. I could connect via USB or Bluetooth and the auto-sync worked fine.
BUT, Here's the kicker, after a hard reset, I've restablished all my connections via bluetooth etc. and can manually initiate a sync via bluetooth. HOWEVER in the Activesync connections I can no longer select aything other than "`USB". For the life of me I cannot remember how I got the Touch to give me that other option and it is the ONLY thing preventing the auto bluetooth sync from working.
Any insight would be much appreciated.
Hi and welcome to XDA,
did you do a H-Reset or a new rom flash? the new rom may not support BT Activesync, you should also pair your phone to your PC, that may enable the option
Eh - my bad...should have specified in my OP. This is running stock WinMo 6.1 Professional.
Did you pair to your PC?
Not this time around.....dammit you know that sounds like it might be it! I'll have to a backup, hard reset and try it out.
If that's truly the case and I can get that option available again then I have a really tidy solution for people wanting to Autosync via Bluetooth.
(Although this is probably not an issue nowadays as most phones are coming with WiFi, so I guess people are syncing that way)
Badwolve1 said:
Did you pair to your PC?
Click to expand...
Click to collapse
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
woodbane said:
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
Click to expand...
Click to collapse
Depends what stack you have
Sorry, i don't think i can help
If i find anything, i'll let you know
Default MS BT stack for WinMo Pro 6.1. I haven't changed anything on this ROM at all.
I must have done something during BT setup that allowed that option to appear but I'll be damned if I can remember what it was!
It's not a huge deal as I luckily had a backup with that configuration working, I was just being a bit anal about doing a complete clean install, there were a few programs I wanted to get rid of and felt my phone had slowed up a bit.
Cheers.
Hi, I am moving across country. I bought a GPS but the movers stold it. I also bought a bluetooth dongle from Walmard, downloaded it as well. I have 4 pets in my car and limited time. I uses AT&T and had them sign me up for TelNav. No one there can tell me how to configure and everytime I try to call and or get a signal I loose them or they don't cover roaming where I am... I also have a Dell Netbook with Microsoft Streets & trips. I looked up how to get it to sync with phone and use software as well as the best and saw Garmin... but could not get all of the settings in correctly. Can someone please post directions for either or both so I have back ups.... Thanks,
I should add, I tried to sync my X1 to my XP and can't do that over Wifi or with the usb plugged into it. I had to reinstall windows XP before leaving home but I checked all the drivers and they look to be installed on the XP. I tried changing so many different things though that I might have messed that up so if you know specific settings on phone and netbook any help there would be great. I have Microsoft active sync but don't know if I was suppose to download any software for thw X1, it's i by the way...