Related
Hi guys.
I did it... i screwed up my QTek S100! I tried to upgrade it, maybe the wrong files, dunno... now it is *dead* ! I only get a dark screen with "SERIAL V1.00" or "USB V1.00" if docked (should be bootloader mode). Nothing else.
Would you please be so kind as to help me in recovering from the disaster ? I do not have any backup, nor ROMs. I own a 512 MMC.
I would need English Roms... pleeeese !!
Thanks a lot.
Silver
Do you still have the files you used to upgrade? What's the name of the file?
Also, leave the info on your previous ROM.
I had the same problem with my Qtek S100 when upgrading it with the new firmware. The upgrade process stopped/crashed the first time leaving my unit in the same state you're describing. But, what I did was simply to run the upgrade utility again and then it worked fine the second time.
I don't know where you're from but if you have a swedish unit like me you can get the latest upgrade utlity from this adress:
http://www.smartmobile.se/upgrade/upgrade.aspx
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
slvrbllt said:
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
Click to expand...
Click to collapse
Looks like the same happened to me. Try to open battery cover (or remove battery for several second. Then put everything back and push Power button. Does it turns on (with hard reset)?
Nope buddy! The OS is gone! Whatever I try to do, it always starts in Bootloader mode (Serial V1.00/USB V1.00).
Try removing the battery for 30 minutes (or whatever time it takes for the backup battery to discharge). That should recover your previous configuration although I haven't tested it.
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
slvrbllt said:
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
Click to expand...
Click to collapse
I would like to try upgrading my JAM...but now I`m affraid a little bit... :roll: Have U tried to update with the latest S100 ROM...the swedish one?...or the I-mate JAM WWE ROM...?
Regards,
Primoz
Backup ROM
Is there a way to make a backup of my rom?
I have the qtek s100 with english rom.
Purchased seperate.
rom 1.03.00 WWE
radio 1.05.00 (upgraded)
extrom 1.03.100 WWE
Had the same issue with my radio version upgrade.
Scared the hell out of me ...
Backlight did not lit up ...
And an error apeared on my pc ...
But I was able to upload it when I tried again and the sync program of ms was killed.
If anyone knows how to make a working back-up ...
I like to help.
Think it's interesting to see how everything works.
And ofcourse, if you worked it out already, let me know how ...
And what macrinus said wont work.
When you do a hard reset, you do exactly the same.
So I think it's all gone.
why not dump the os to sd card, ntrw to pc and then put the nb1 fille in the ftp........
Tell me how ...
Tell me how, and I will ...
Sounds like chinese to me buddy.
Just got this pocket pc for 3 days.
First time I use a ppc.
Is that with xbackup?
Then choose all data?
Or do you mean another way?
What is ntrw?
And how do I get it from the backup?
And also, how is he suposed to upload it to his ppc?
Am asking this all to get to know it for myself.
Need the basic information before I can actually do all this ...
ok, sorry, if you are new to this forum, maybe its time now to browse this forum using the "Search" . There are hundreds or maybe thousands really good topics / advices available in this forum, posted by experts.
I and hundreds others I think, have really learn a lot from this forum.
On this specific topic you can search for :
- dump rom
- bootloader / bootloading.
You can also go to this forums ftp : ftp://xda:[email protected]/
to download all the necessary files
pls be patient and enjoy the tour......
Hi all,
I have just bought an XDA-neo from O2 , but a german version. Can someone tell me what i need to do to convert it into an english version. I have been told by O2 that this is not possible as i will loose alot the functionality (the Wifi, bluetooth, etc).
If it is possible to change can you please let me know how and where to get the software. As working withthe german version is being a nightmare.
I have even need to install a german version of Outlook as so that i can perform a backup of my data.
Thansk for your help
Welcome to the forum.
All you need to know is here.
Any WWE (World Wide English) ROM will do (for your device of course).
The O2 people are lying to you because they don't want you messing with the device.
As long as you change to a tested ROM there should be no problems with WiFi BT etc.
But be careful!
Make sure all your data is backed up, your device is fully charged and that you read and understood the instructions fully before beginning.
Interrupted or incorrect ROM update will render your device unusable (brick)!
P.S.
This thread was posted twice please delete the redundant copy.
Also it is highly recommended to check the WiKi an search the forum before posting.
Hello!
I had been using Helmi_UNI_AKU3.5_v1.3 for a while, today i tried to flash WM6_TrueNeytral rom and now my pda is dead. Before that i enabled the RAPI using the enableRapi cab, as my pc kept on saying that "Cannot copy files". But after enabling rapi, i tried again and i was flashing WM6_TrueNeytral rom, half way thru flash(after creation of partition's), i got some error message [some lame win error- i am using win xp xp2). And now my PDA is not working.
I had a some prob before when i had tried to upgrade Phorpeth IVVV, but i used HELMI rom to repair and overcome the problem...
Please tell me an GENRIC version of ROM which i can use to repair it.
Regards,
admin22
admin22 said:
Hello!
I had been using Helmi_UNI_AKU3.5_v1.3 for a while, today i tried to flash WM6_TrueNeytral rom and now my pda is dead. Before that i enabled the RAPI using the enableRapi cab, as my pc kept on saying that "Cannot copy files". But after enabling rapi, i tried again and i was flashing WM6_TrueNeytral rom, half way thru flash(after creation of partition's), i got some error message [some lame win error- i am using win xp xp2). And now my PDA is not working.
I had a some prob before when i had tried to upgrade Phorpeth IVVV, but i used HELMI rom to repair and overcome the problem...
Please tell me an GENRIC version of ROM which i can use to repair it.
Regards,
admin22
Click to expand...
Click to collapse
I would suggest restoring your Doc table with MTTY, then upgrade your BootLoader version if you have not done this allready and re-flash the rom of your choice.
?
admin22 said:
Hello!
I had been using Helmi_UNI_AKU3.5_v1.3 for a while, today i tried to flash WM6_TrueNeytral rom and now my pda is dead. Before that i enabled the RAPI using the enableRapi cab, as my pc kept on saying that "Cannot copy files". But after enabling rapi, i tried again and i was flashing WM6_TrueNeytral rom, half way thru flash(after creation of partition's), i got some error message [some lame win error- i am using win xp xp2). And now my PDA is not working.
I had a some prob before when i had tried to upgrade Phorpeth IVVV, but i used HELMI rom to repair and overcome the problem...
Please tell me an GENRIC version of ROM which i can use to repair it.
Regards,
admin22
Click to expand...
Click to collapse
I think you are on the wrong forum.
universal is NOT the name of universal rom versions for all ppc's, but rather one particulair kind of ppc.
greetings,
Wout
thanks
Hello beast0898 & wout,
Thanks for letting me know what to do next.
I will be doing the needful, and try to get it to work.
It was really helpful.
Mods : If incase this is the wrong forum, please move the thread to the appropriate forum and please pm me sub forum where it is moved. Thanks.
Regards,
admin22
bootolader state working?
Hello,
It has been like 3 days, i am an NDE and dont have time to update it. Hectic work.
Well yes the boot loader mode can be seen. It display's
USB or SERIAL
V 1.0
Hello,
Could someone please help me out?
with this issue? It has been like five days.
Regards,
Hello, Beast
Thanks for all the help.
I could recover the PDA yesterday using the method u suggested.
I was doing something wrong before so could not find the USB port, later i browsed all the posts to get it and did the required thing. Please close the post.
KISSES.
Hehe, u made me that happy!
Regards,
admin22 said:
Hello,
Could someone please help me out?
with this issue? It has been like five days.
Regards,
Click to expand...
Click to collapse
Have you tried installing one of JWright's ROM's?
Also, I have never heard of any of the ROM's that you are trying - I do know that you are using a Universal (since its called the PU10), so thats not the issue.
Additionally, try a different computer and cable - they may be causing the problems
Hello everyone,
i am new to this forum and wanted to seek advice from some pro's. I just bought a ATT/Tilt/Kaiser and I am trying to install a cooked ROM but I read that you need to first do a CIC unlock? Is this true? Well i tried both and everytime no luck! I connect to my PC with usb cord and when i try to install my activsync disconnects on its own. Well due to disconnecting it never gets to complete the download process(installing cooked Rom). My question is: am I doing this wrong? Why is my activsync connection disconnecting on its own when i try to down load the cooked rom? I really appreciate any help i can get. Thank you everyone!
Mel
esmael said:
Hello everyone,
i am new to this forum and wanted to seek advice from some pro's. I just bought a ATT/Tilt/Kaiser and I am trying to install a cooked ROM but I read that you need to first do a CIC unlock? Is this true? Well i tried both and everytime no luck! I connect to my PC with usb cord and when i try to install my activsync disconnects on its own. Well due to disconnecting it never gets to complete the download process(installing cooked Rom). My question is: am I doing this wrong? Why is my activsync connection disconnecting on its own when i try to down load the cooked rom? I really appreciate any help i can get. Thank you everyone!
Mel
Click to expand...
Click to collapse
STOP!!!!
BEFORE YOU MESS UP YOUR PHONE ...go read the kaiser wiki and pay close attention to the rom upgrading section. Trust me it will do you great good and save you from alot of headaches.
Before you flash a rom you need to get a hardspl on your device. If you don't know what this is please don't do anything to your phone until you have done your homework, taken notes, memorized steps, and taken a 8 hour sleep (well maybe skip sleep).
and remember WIKI IS YOUR BEST FRIEND
welcome to xda
esmael said:
Hello everyone,
i am new to this forum and wanted to seek advice from some pro's. I just bought a ATT/Tilt/Kaiser and I am trying to install a cooked ROM but I read that you need to first do a CIC unlock? Is this true? Well i tried both and everytime no luck! I connect to my PC with usb cord and when i try to install my activsync disconnects on its own. Well due to disconnecting it never gets to complete the download process(installing cooked Rom). My question is: am I doing this wrong? Why is my activsync connection disconnecting on its own when i try to down load the cooked rom? I really appreciate any help i can get. Thank you everyone!
Mel
Click to expand...
Click to collapse
Did you NOT read about JUMP-SPL ?
Try page 1 ( yes the very first page ) of the kaiser wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
All answers are here .
Hello, and thanks for you advice. Yes i have actually read about the hardspl,i downloaded: kaiser-hardSPLv1, but the issue still remains. My activsync connection fails as the hardsplv1 tries to install. I am not sure why i am loosing connection. I have made sure the connection from my PC and tilt via usb cord are pluged in well. Do you know what i need to do now? Thanks Mel, also would you mind calling me or can I call you for assistance with this issue?
Make sure U use olipro CID unlock or else u will be dissapointed ..
;D
Make sure U use olipro CID unlock or else u will be dissapointed ..
;D
Ok my problem is I used the tool to upgrade my Windows Phone to mango beta 2 (build 7712) from NoDo. I then got a new computer. No longer having the old NoDo backup I cannot revert, but then Microsoft said you would not have to go back to NoDo. So I have tried multiple times, but everytime I try to upgrade to the RTM 7720. It fails at the end and gives me an error code 80180048 and then my phone is fine, but is still on 7712. I have also hard reset it and that didn't fix it either. Can anybody help with this?
I cannot help you.
I cannot help you, you are very smart, but I cannot help you. I am terrible sorry. I would help you if I could.
themanofwisdom said:
I cannot help you, you are very smart, but I cannot help you. I am terrible sorry. I would help you if I could.
Click to expand...
Click to collapse
I am kinda looking for a somewhat better answer than that, but thank you anyway.
Look on the dedicated forum, or the wiki, for your phone. You'll find the various release ROMs. You can flash one of those ROMs to your phone to either put it back on NoDo or upgrade it to Mango directly. This will erase all content on your phone, but since you already tried a hard reset I'm guessing you won't mind.