Related
i upgrade my rom from german to english
there is a way to go back ??
i meen to downgrade the rom to german again ?
thanks
please anyone ???
please anyone can help ?
at least the bootloader method will work. if you use an 'upgrade' tool im not sure if it denies to install when it detects a higher version on the device as the upgrade it contains.
bootloader doesnt care for versions it just overwrites all the rom.
Yes, download german version for sd card flashing, use xdatools to program sd card with rom from kitchen, then insert sd card to xda, push reset while holding power button, when prompted push the action key, once programmed, push once in the hole next to headset socket, wait one minute push once more, your phone will now be restored to german rom.
can you please tell me where to find xdatools and does...
does there is a manuel to read how to do it step by step
because im afraid to crash my device
second - do i must put the german rom for sending my device to the company if something happen ??
i heared that it can cancel the garentee of the device am i right ?
thanks
i appriciat if someone can please write a simple manuel how to do it because it is very important issue
thanks
please anyone ???
please anyone ???
xda2nbftool
pilpel said:
does there is a manuel to read how to do it step by step
because im afraid to crash my device
second - do i must put the german rom for sending my device to the company if something happen ??
i heared that it can cancel the garentee of the device am i right ?
thanks
i appriciat if someone can please write a simple manuel how to do it because it is very important issue
thanks
Click to expand...
Click to collapse
I think u must read http://wiki.xda-developers.com/index.php?pagename=FullTextSearch&s=xda2nbftool
2. I think so...but don't worry...btw u can flash u rom with the default O2 from germany...:wink:
Cherss
J10DA
Please ignore my advice, I thought I was in the xda section not the magician section.
so can anyone pls tell me how?
so can anyone pls tell me how?
After flashing from sd card with a german big Storage rom and a soft reset, the phone doesn't switch on anymore.
I can't go into the bootload either.
What can i do now to bring back my rom bachup?
thanks!
When you can't go into bootloader you've probably killed it. Pls try once more & connect it with usb or ac to charge.
You need to be in bootloader to rescue it, a shipped-rom works best in this situation.
Still got warrenty, use it claiming it's cause by regular TMO update.
Cheers, M
the phone, doesn't react at all.. so if i can't get into the bootload, i will have to change it?
Is there any other possibility to reactivate it, or to boot the broken rom?
The bootloader is the most important part of the rom, so when even that's part is corrupt I see no repair possibilities other than chip swapping.
You'll have to send it back. Try out the warrenty issue, when the rom is this much damaged I can hardly belief that a service engineer can see what caused it.
Hope the best for you, M
You don't know someone in your neighborhood with a magician too? Or Live close to Arnheim. So you can try another battery, it might be empty & not charging.
No, the battary is fine, i've just got a new one on friday form Warrenty-Service, because of a broken speaker, so i'll send it away again..
I've read about some others that had same problems with that rom, and surprisingly there were people, where that rom is working well, i just don't belive that, because i did erverything right and it should've worked...
now i'm worried weather i should try it again with an other rom when i recive a new phone, or leave it as it is! :lol:
P.S: Thank you very much for your help!!!
Is the Bootloader a part of the rom, or is it an independent prog. on the phone?
The bootloader is a special part of the rom. Pls visit the wiki for complete explanation http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
There's a bootloader section & a section about BS from a shipped-rom which is in my opinion the safest way to achieve BIG Storage.
Hope they fix your magician soon.
Cheers, M
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
More detail please...
Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II
well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%
its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?
it says just usb and v1.0
it tries to flash and then stucks at 7%
new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N
please help!!
Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT
Did you try a google search? I found this related to error 112...
Thanx, trying possible Fix!!
aahh it doesnt work... please can anyone help more??
tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???
can i get some help? please =(
i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?
Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.
close this thread plz
OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.
hi everyone,my problem is that after uprading my pm300 it stuck into bootloader any idea on how to solve this problem and is g4 i realy need your help urgently thx in advance
What ROM did you upgrade to? If it was to a WM6 ROM using the "new" upgrade method, you may have failed to hard SPL your device. What ever the cause, the solution (as ever) can be found on the wiki.
yes you are right i didnt HARDSPL my device befor updating with (ROM
MY GREEN EDITION WM6.1)is there any hope that my phone will come back to live,by the way thx for the reply
If the device can get into bootloader, it should be possible to recover it In my previous post there was a link to the wiki page for recovering devices from bootloader. If you want any more info, I'll be happy to try and help...
thx for the quick reply but my problem now is if i connect the phone i can see the usb on the screen alright but the computer doesnt sync it and if i go ahead and update the rom i get error make sure the usb/cradle is connected properly i dont know what to do plssssssssss i need help to revive this phone thx in advance
thx mr 13v5y for your help my is alive and working like never before thx to you once again i rely appreciate the help you gave me more greep to shoulders ve a nice day
No problem! If you ever have any issues, take a look at the wiki first though
I double posted! I blame Linux!