Hi again and again folkes!!!
I recently instaled the (in)famous bluesoil bt stack that was found in a recent topic here at xda... first impression was good but... there is always a but... i've noticed that it ****s up my gprs connection and my modem settings... gprs network card disapears even when i return to MS BT... any soluction to solve this problem? i use the S110 to connect to msn in a regular basis and it sucks not being able to use it... and if someone bothers.. how (dont know if its possible) to stream video/sound from my pc via bluetooth and how to acess shared folders in my pc from the pocket also via bt? i already set auto ip(DHCP) in both... no way... assigned ip's in both and still nothing. If someone give it a time to post a How-to about PAN and VCN(control pc with pocket via bt) and other nice but strange to most users it would be very apreciated.
Deactivate the GPRS before installing
which installer of blusoleil stack do u use? is it the xxx.r2.arm ?
in this case the gprs problem should not appear, otherwise, you have to disconnect the GPRS so that only the white "G" appears.
installing the stack with shown the "G" only the GPRS Settings will work well after installation.
but another question, do u use the pan? and if its working for you
can u PLEASE post all the settings of your 3 lan adapters (btpda btwin and lanwin)
*gate/ip/dns/sub for each adapter and the ics on which adapter.
i'm getting the same error message every time if i try to activate the ics.
(like: 192.168.0.1*needed for ics could not be assigned, the ip adress is assigned to another pc in the network) i'm using german xp, don't know the exact words.
after reading 1000 posts and trying this all the last week and the pan won't work.
thx for every tip
greets phr³³k
Hi, I have a HTC P3600 WM6Pro with bepe rom. In the comm manager I can disconnect from a data connection but can't enable one with out opening another program first ie Opera or Slingbox.
Is there a cab to enable this in the comm manager settings or using the data icon on the top of the screen, which i'm sure i was able to do on a previous PPC.
Thanks in advance,
Andy.
Don't know The exact answer to your question but I am using PhoneAlarm and the skin that I am using as the Today Screen Plug-In has a very convenient icon to swItch On and Off the data connection.
Though I have not used the other one myself but I hear that SPB GPRS Monitor also provides a similar Today Screening Plug-In
hey, I have a problem with my HTC TP.
it always prefers the HSDPA link when connecting with a web based application souch as opera or MSN.
Even if I have it connected to a Wi-Fi it still boots up the HSDPA and goes online using that link.
I'm new to WM, so this is a bit vague, but I had the same problem, but I fixed it at some point last week...
There is a setting, somwhere (I told you it was a bit vague!), that tells programs to use WiFi as the default connection. I can't for the life of me remember where, and I've flashed roms since, but I'm sure it was a windows setting in "settings > Connections".
Sorry I couldn't be any more help, but at least you know there is a fix, somwhere...!
Hehe, thanks, I've tried looking for this feature for hours, becouse I can't for the love of whoever understand why there wouldn't be an option for it
there isn't one because it shouldn't need it. As long as your Wi-Fi is set to Internet, and Not work, it should always use that as long as it is connected.
Just having Wi-Fi turned on doesn't cut it.
There are certain applications that will always use the cellular network, like pushmail, but in general, all apps will use whichever internet connection is available. and if Wi-Fi isn;t connected, it will automatically connect to GPRS/3G.
Wellt hats the problem, I connected it t my home Wi-Fi set it as internet connection and the problem remains. I have redone the settings several times and it still prefers the HSDPA connection.
if I turn of all other alternatives to connect to the web, like removing APN settings for GPRS and HSDPA it uses the Wi-Fi, but as long as there is another Access link to the net the Wi-Fi isn't used
I have the same problem with Hotmail syncing (not defaulting to Wi-Fi), but not with Opera. I do have to change the connection settings though first from the T-Mobile Internet (and their magic transparent proxy) before Opera can work over Wi-Fi, but I thought the connection settings were just for HSDPA/GPRS connections. I'm finding this increasingly frustrating that I need to reconfigure everything depending where I am.
BTW, to get Hotmail to use Wi-Fi I have to go to the Comm Manager and turn off "Phone", turning off "Data Connection" doesn't work, because it craftily turns it back on, seconds later!
first off - i tried searching but could not find any solid info, from start to finish, how to make tethering work
i've never had to tether till now.. tried enabling Internet Sharing and connecting it both via USB and Bluetooth - no success.. i'm using Media Net $15 a month data plan, if that makes a difference (wap Vs gprs in user name but i did try both)...
is anyone using their phone as a modem? what settings do you have? please point the noob in the direction of a step-by-step guide if one is available (i did try to search but nothing than enabling Network connection via registry edit - not relevant)..
thanks a bunch to anyone who could help!
I'm online using the "internet sharing" connection now (in Florida cleaning up after a flood) (Yes, I need to get back to work . . . .).
I also have a Fuze and am using EnergyROM 2.0. Haven't changed any settings since installing the new ROM. Works like a charm for me.
Make sure the proxy box under the MediaNet settings is NOT checked.
vovan75 said:
first off - i tried searching but could not find any solid info, from start to finish, how to make tethering work
i've never had to tether till now.. tried enabling Internet Sharing and connecting it both via USB and Bluetooth - no success.. i'm using Media Net $15 a month data plan, if that makes a difference (wap Vs gprs in user name but i did try both)...
is anyone using their phone as a modem? what settings do you have? please point the noob in the direction of a step-by-step guide if one is available (i did try to search but nothing than enabling Network connection via registry edit - not relevant)..
thanks a bunch to anyone who could help!
Click to expand...
Click to collapse
Open up taskmanager and make sure that activesync is not running on the phone. this will not allow internet sharing to work. what does the phone say when you open internet sharing and click connect?
download a registry editor (i use total commander, and it works just fine).
open it up, go to \plugins\registry\HKLM\Comm\InternetSharing\Settings\ForceCellConnection and simply delete the contents of the value so that it's empty. Go ahead and do a soft reset and open up the internet sharing app. From there, select the Media Net connection and hit connect. Voila, good to go!
Enjoy!
ps I've gotten 2+ Mbps speeds via tethering
Dane Austin said:
Open up taskmanager and make sure that activesync is not running on the phone. this will not allow internet sharing to work. what does the phone say when you open internet sharing and click connect?
Click to expand...
Click to collapse
I keep activesync enabled so that i'm able to receive corporate email when on the road.
I was able to tether via USB (was doing nothing different from last night when i was unable to internet share via USB, however I noticed when shutting down that BT stack crashed); internet sharing app came up automatically once I selected internet sharing right after hooking up the cable to my laptop, and MediaNet was there by default (I guess it's all cooked into the ROM; did not have to delete any registry keys; kudos to NRGZ)... was able to get close to 1Mb/s download speed (upload is really slow however, less than 50Kb/s) - not too bad overall
Still have problem connecting via Bluetooth
maybe i'm having problem pairing laptop and Fuze? is there a pre-defined code/pass key that i'm supposed to use for the Fuze?
i was just using my security/lock code.. when laptop starts dialing (is dial up number *99# correct?), i get the following error box:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99#...
Error 678: The remote computer did not respond. For further assistance, click More Info or search Help and Support Center for this error number.
-------------------------------------------------
Anybody had this issue? or can share their connection settings for Bluetooth?
thanks everyone who responded!
vovan75 said:
I keep activesync enabled so that i'm able to receive corporate email when on the road.
I was able to tether via USB (was doing nothing different from last night when i was unable to internet share via USB, however I noticed when shutting down that BT stack crashed); internet sharing app came up automatically once I selected internet sharing right after hooking up the cable to my laptop, and MediaNet was there by default (I guess it's all cooked into the ROM; did not have to delete any registry keys; kudos to NRGZ)... was able to get close to 1Mb/s download speed (upload is really slow however, less than 50Kb/s) - not too bad overall
Still have problem connecting via Bluetooth
maybe i'm having problem pairing laptop and Fuze? is there a pre-defined code/pass key that i'm supposed to use for the Fuze?
i was just using my security/lock code.. when laptop starts dialing (is dial up number *99# correct?), i get the following error box:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99#...
Error 678: The remote computer did not respond. For further assistance, click More Info or search Help and Support Center for this error number.
-------------------------------------------------
Anybody had this issue? or can share their connection settings for Bluetooth?
thanks everyone who responded!
Click to expand...
Click to collapse
now, i just tried leaving User Name and Password fields blank on the Bluetooth connection wizard, and using dial-up number *99***1#, like they suggest here: Answer Center - Create a Windows XP Dial-Up Networking Connection for a Bluetooth Device , and got a new error:
------------------------------------------------
Error Connecting to BluetoothConnection
Dialing *99***1#...
Error 777: The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order.
-------------------------------------------------
this is just getting funnier but kind of frustrating...
nhshah7 said:
download a registry editor (i use total commander, and it works just fine).
open it up, go to \plugins\registry\HKLM\Comm\InternetSharing\Settings\ForceCellConnection and simply delete the contents of the value so that it's empty. Go ahead and do a soft reset and open up the internet sharing app. From there, select the Media Net connection and hit connect. Voila, good to go!
Enjoy!
ps I've gotten 2+ Mbps speeds via tethering
Click to expand...
Click to collapse
tis fixed my tethering issue... thank you!
Damn AT&T trying to force people to pay more for tethering... shame!
smittyofdhs said:
tis fixed my tethering issue... thank you!
Damn AT&T trying to force people to pay more for tethering... shame!
Click to expand...
Click to collapse
smitty, do you tether via bluetooth or usb? i have no problem with usb now but still get the same "error 678: the remote computer did not respond..." i wonder if my BT driver is corrupt or i'm blacklisted by at&t
if anyone is able to connect using bluetooth and Internet Sharing app on Energy or any other similar ROM, can you share your dial-up settings with me?
after i start Internet Sharing app, with PC Connection = Bluetooth PAN and Network Connection = MEdia Net, and then right click my Bluetooth Modem in Dial-up Network Places on my laptop, the icon shows "connecting" for about 5 seconds (and the data icon H on the phone starts rotating) and then the error comes up on computer screen.. i can't believe no one else has had the same issue, i must be something with my laptop
vovan75 said:
smitty, do you tether via bluetooth or usb? i have no problem with usb now but still get the same "error 678: the remote computer did not respond..." i wonder if my BT driver is corrupt or i'm blacklisted by at&t
if anyone is able to connect using bluetooth and Internet Sharing app on Energy or any other similar ROM, can you share your dial-up settings with me?
after i start Internet Sharing app, with PC Connection = Bluetooth PAN and Network Connection = MEdia Net, and then right click my Bluetooth Modem in Dial-up Network Places on my laptop, the icon shows "connecting" for about 5 seconds (and the data icon H on the phone starts rotating) and then the error comes up on computer screen.. i can't believe no one else has had the same issue, i must be something with my laptop
Click to expand...
Click to collapse
I haven't been able to get my HP laptop to pair via bluetooth with my Fuze yet so I was doing USB. With regards to your issue, do you ahve one or two pull down menus in INternet Sharing app? If you have 1, then your registry needs to be hacked. AT&T used a registry key to force Internet Sharing app to only use the isp.cingluar access point (instead of wap.cingluar). If you pay the extra bucks for the full unlimited with tehtering then your account is setup to use isp.cingluar as well as wap.cingluar. If you just have the normal unlimited w/o tehtering option (which is not unlimited it caps at 5GB/month) then you only can use wap.cingluar. THis is how AT&T is going more easily find people using the cheaper plan with thethering and of course charge them up the butt for violation of the TOS (that they keep changing). Removing the registry key, fixes the issue.
smittyofdhs said:
I haven't been able to get my HP laptop to pair via bluetooth with my Fuze yet so I was doing USB. With regards to your issue, do you ahve one or two pull down menus in INternet Sharing app? If you have 1, then your registry needs to be hacked. AT&T used a registry key to force Internet Sharing app to only use the isp.cingluar access point (instead of wap.cingluar). If you pay the extra bucks for the full unlimited with tehtering then your account is setup to use isp.cingluar as well as wap.cingluar. If you just have the normal unlimited w/o tehtering option (which is not unlimited it caps at 5GB/month) then you only can use wap.cingluar. THis is how AT&T is going more easily find people using the cheaper plan with thethering and of course charge them up the butt for violation of the TOS (that they keep changing). Removing the registry key, fixes the issue.
Click to expand...
Click to collapse
sounds like we are in the same boat here - i can tether my HP laptop with Fuze via USB no problem now using Internet Sharing app, but no luck with Bluetooth whatsoever... i don't think there is an issue with the registry ever since i switched to Energy 2.0 ROM which must have the settings customized (so yes, I do have 2 pull down menus, and I have Media Net selected in the second one). So, I tried to use both wap.cingular and isp.cingular APN's (both [email protected] and [email protected] for User Name, CINGULAR1 for password; then I tried leaving User Name and Password fields blank...) with no success... nothing works, damn it!!!
looks like it gets paired up briefly, then starts dialing and gets the error in a couple of seconds.. the problem must be with the bluetooth dial-up settings for AT&T, because: 1) i have no problem tethering via USB; 2) Fuze is being paired up with my laptop and trying to use HSPDA data connection (as indicated by rotating H on the phone for a few seconds while my laptop tries to dial up).
by the way, have you tried dialing *99# or *99***1# (i tried both numbers as well as *99***3# for Samsung phones) from your Fuze, did you get any modem dial tone??
thanks!
I was able to connect to internet through bluetooth by using the following settings.
After pairing the bluetooth on both Fuze and laptop:
On my Fuze: open 'Internet Sharing' then select Bluetooth PAN and choose the appropriate network connection (in my case TZones) then tap 'Connect'
On the laptop: open bluetooth neighborhood then 'discover service' or 'explore' on the Fuze device. You should see 'Network Access Point on [Fuze]' and then double click on it.
Done.
ICS on AT&T HTC Fuze Cut Off (NRG Rom Series 2.0)
AUTiger83 said:
I'm online using the "internet sharing" connection now (in Florida cleaning up after a flood) (Yes, I need to get back to work . . . .).
I also have a Fuze and am using EnergyROM 2.0. Haven't changed any settings since installing the new ROM. Works like a charm for me.
Make sure the proxy box under the MediaNet settings is NOT checked.
Click to expand...
Click to collapse
I've been using ICS with no problems with a ThinkPad T43 for a few weeks at work to circumvent the proxies and reach out to my home machine via RDP. The RDP app for the Fuze just doesn't cut it with its whopping 640x480 screen. Turns out that AT&T in NY/NJ is somehow monitoring the connections. I was watching a bunch of videos to pass some downtime, and I guess I triggered some kind of alert on their end. ICS will connect to MediaNET with no problems (settings read wap.cingular), ICS status shows connected (I am connecting over USB) and my ThinkPad network connection shows a private IP address handed to it by the phone (192.168.0.x range). However when I am trying to connect to something, I'll get timeout errors. Running a simple ping comes back with no DNS capabilities as I can't even ping google.com... Has this happened to anyone on the forum? Can anyone offer some advice? I am thinking of just calling AT&T and playing dumb, saying that I was watching videos, as well as moving lots of music from my home computer via FTP ... Any advice appreciated. I pay for the $40/month PDA plan... I don't see the point of paying for tethering when you're already paying for data. Yes, before people start flaming me, I was stupid by using the connection to watch a bunch of videos, but you're able to watch youtube on your phone anyway....
--UPDATED 7-31-09 3:03PM --
So I downloaded ICS Control v0.21, which by the way is an awesome program. I went through the config, was able to connect my laptop to my HTC Fuze via WiFi. That was easy. As palringo (win xp version) was connecting in the background, I was able to do a test google search and get back results. Ran a continuous ping on google (ping google.com -t). Turns out that after about 25 ping replies or so, just about the time it took me to do a few web searches, the requests start timing out. Directing the ping at another website shows that the ping request couldn't find the host... basically the same problem I had tethering over USB. It's as if the AT&T network is determining that the request is coming from a PC and not the PDA and not passing the DNS requests... Either way, I tried to ping google via 74.125.45.100 and got back a request timed out. I am now wondering whether or not this may have to do with the packet MTU and whether or not the PDA packets differ from regular PC/WinXP packets. I just don't know enough about networking to be able to know. I am able to ping the Fuze gateway (for all-intensive purposes set to 192.168.2.1) and get back replies within 2-4ms. I really would love to hear from someone to whom this has happened before. I haven't called AT&T yet as the data connection on the phone itself works just fine, and I am able to load pages on the phone just fine. It's just any form of ICS that's beat...
Come on XDA-Dev, I know the collective intelligence can come up with something here.
I didn't think ATT could detect the difference between tethered requests and ones that originate on the phone, that would be bad though, if that were the case. Since the previous poster was watching videos, it seems to me the bandwidth would be the comparable to watching videos with the YouTube app on the Fuze, which I'm sure is within the terms of service contract.
My experience is closer to vovan75's. ICS works fine via USB, but does not work via Bluetooth. The strange thing is with the BT connection, I can ping the gateway, and even do nslookup with the default DNS, and sometimes if I get lucky, the connection works for a few seconds, allowing a page to load, totally random.
I thought everything worked using the original ATT rom, so I have a feeling culprit is something in the NRG rom, or maybe a radio incompatibility. I might re-flash to the old official rom just to try this, before the next time I update to the latest NRG build.
My setup:
Fuze with EnergyROM (July 22 build)
Radio: 1.14.25.35 (from official HTC 6.1 update)
Notebook with Windows 7 RTM
Windows calls this "Bluetooth Network Connection" (I don't see a reference to DUN, at least not in Win7)
ICS using BT (not working):
IPv4: 169.254.46.56
Gateway: 169.254.247.172
ICS using USB (working):
IPv4: 192.168.0.102
Gateway: 192.168.0.1
Windows 7 calls this "Remote NDIS based Internet Sharing Device"
DSLReport speed test (Flash) - down: 696Kbs, up: 336Kbs (varies quite a bit, much better at night of course)
Okay, figured it out. The DHCP setting for the bluetooth PAN should be off (I know, counter-intuitive). I found this by diff'ing the entire HKLM-Comm registry branch of the last EnergyROM build (Sept 6) vs the official ATT 6.1 rom (5.11.502.2WWE), which did work after all.
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\BTPAN1\Parms\TcpIp]
"EnableDHCP"=dword:00000000
BTW, you don't need to setup Dial-Up Networking when using the Internet Sharing application (IntShrUI.exe). DUN needs to be configured on the PC when using the phone's modem bluetooth service, and AFAIK, needs to be provisioned by AT&T before it will work. The Internet Sharing app acts like an uplink for paired devices in the bluetooth personal area network (PAN).
rasterX, you rock! That little illogical registry fix is all I needed... I'd been banging my head against this Bluetooth DUN thing for days.
Thanks!
Hi!
What is the best application for monitoring usage of all the different connections in the winmo device (I have a Diamond2 btw)?
I have tried SPB Wireless monitor, but didn't like it for some reasons. The main thing I'm after is the ability to separate the usage on all the different connection type
ActiveSync
Wifi
GPRS/EDGE/3G
MMS data
To me it doesn't look like SPB Wireless can do this separation.
Any other recommendations?
Regards,
PK
SPB does it for me, monitors all connections individually. That said the only one i use is GPRS/3G which it quite correctly aggregates into one connection.
Hi!
I have tried SPB wireless monitor and it works good with the cell based connections (GPRS/EDG/3G), what I miss is the Wifi and ActiveSync part.
Regards,
PK
Mine does USB and wifi as well, they need to be enabled on the Today settings bit though. I'm running version 3.0.1.
Hi!
OK, I see! I run TouchFlo 3D on my device so I haven't tried the today plugin part of the application, just the "standalone" mode.
Regards,
PK
deedee said:
Mine does USB and wifi as well, they need to be enabled on the Today settings bit though. I'm running version 3.0.1.
Click to expand...
Click to collapse