In the last night I flash file "os1.11wwe_bigstorage.nb1" form ftp.forum.xda-developers.com/Magician/BigStorage_ROMs in my xdaIImini by program romupdate.exe for make it to bigstorage
When it finish the device message "checksum errot"
after i reset my device it can't access to bootloader mode
Who can help me????? please!!!!!!!!!!!!!!!!!!!!!!!!
PS now i can't use my device because it can't switch off
Remove mainbattery, allow to drain backup battery overnight and try restarting the device once main battery has been inserted again.
NEVER heard of a device that could not be reset at all!!!
Greetings
P.S.: Next time you want bigstorage rather use the mksbigstorage routine described thoroughly in this forum!!!! I figure it to be more exact!!!
Related
hi everyone,
I just buy a Qtek S110, It is a english Version, and I download a dump chinese rom for Dopod 828, after i fully charge the device, I upgrade the device straight forward by following step
1,use romupdate.exe to backup the ROM
2, use command ntrw read oldrom.nb1 i: to read the rom out
3,use Hex Editor to read first 416 bit in the oldrom
4,replace the first 416 bit in the dump rom which i Download in the FTP
5 use command ntrw write NewRom.nb1 i: to write the new rom to SD card
6, enter the serial mode again and press Power button to start upgrade, after 100% it display Checksum failed
7, Restart
is there any problem for my steps? after i restart my device it keeps in the serial mode, the device can not start again! even restore to the oldrom (the one I backup)
I attempt to flash the rom few time, but noting can be fixed.
and finally I download the MaUpgradeUt_noID.exe to flash back to Orginal rom and now the Back light can switch on and stay in White,
Did anyone can help my situation? thx in advance.
ericcc said:
is there any problem for my steps? after i restart my device it keeps in the serial mode, the device can not start again! even restore to the oldrom (the one I backup)
I attempt to flash the rom few time, but noting can be fixed.
and finally I download the MaUpgradeUt_noID.exe to flash back to Orginal rom and now the Back light can switch on and stay in White,
Did anyone can help my situation? thx in advance.
Click to expand...
Click to collapse
ericcc,
what knd of sd did you use, people, including myself, are reporting problems with mini-sd and flashing. And did you do the 'restore' with a shipped rom? Cause that can solve your problems, see the upgrade to radio 1.13 for details on steps and downloads.
Final question, tried a hard- or soft-reset? Cause normally the magician doesn't stay in bootloader after flashing and restarting.
Regards, M
I've had the same problem flashing a wrong rom image.
My MDA was stuck in serial mode but also reported an error: ROM image to small (or something). I decoded a .nbf file but obviously this went wrong.
Maybe this is of any help.
At least you can access your bootloader mode!
Got a device from Germany over here in the Netherlands and after trying to update my rom I only have a black screen with a splash screen maybe once in 300 hard resets (but no bootloader!).
Can't be serviced in the NL because the imei is unknown and in Germany you can't send to a service center but only return it to a T-Punkt..
So this sucks....
Cheers
BuDDaH
A disaster!
My very good friend (Qtek S100 Italian) have a big trouble!!!!
Now it's on boot loader and no way to go out
I think that the rom was f**ked, I try with a SD with the rom(I used Multi-port/USB TTY Ver1.11a to do it with another Qtek) but the PDA don't show the download menu
I tried with the original ROM from Dangard but the program say that the rom was not for my device
I used the MaUpgradeUt_noID, but it's not working
the pda screen is always on boot loader, changing only from serial to USB (when I Connect)
I don't know if I can use Multi-port/USB TTY to solve my situation, I tried to use the lnb command but the answer was that I have not the permission
By the way, I disconnect the battery and wait, but when I give power I have always the boot loader
Any way to help me? tnx
Stefano
I've made these operations on my G4 prophet:
after to have CID unlocked the phone, I've tried to install an official italian ROM (a very good choice ), but I've trusted the man that sold me the phone.
Now powering on the phone normally, it shows the splash screen (HTC innovation) and after it power off
if start in bootloader mode (CAMERA + POWER) it shows the three colour display and IPL and SPL version (both 2.18.0001 )and after about 1 second, before to show USB enabling, it power off;
if I try an hard reset (CAMERA + COMM + POWER) it has same behaviour like in bootloader mode;
if I connect USB cable, it resets continuosly ...
Can somebody help me?
how are you cid unlocked? with a buyed tool? or some free issue?
I've cid unlocked the phone with an IMEI based paid tool
Anything to suggest? Thank you.
I don't know if I can resume my prophet so ...
do you have a sd image rom backup (complete of IPL and SPL) for G4 model or do you know where to download it ?
Thank you very much.
have you,charged the phone 100%?I mean with the normal charger,not usb.... Also download this http://forum.xda-developers.com/attachment.php?attachmentid=41869&d=1182254462
(a collection of G4 IPLs,and try to flash 2.20.0001)
Hi tonydeli7,
first thing, thank you for your help,
I will try this evening the suggested solution, but the problem is that I can't access the phone via usb.
I've erroneously upgraded the prophet (the upgrade process terminated with success) with a k-jam rom without backup before the running rom image on SD.
I'll let you know.
Nothing to do, Ihave full charged the battery phone but I 'm not able to access it via USB so that I cannot execute any upgrade by this way. Nobody has a G4 backup available on SD to try the restore?
Thank you.
I've read better the Jesterz topic about Gold Card project and I've found this other one http://forum.xda-developers.com/showthread.php?t=292667
that seems to be same problem of my phone. I'll let you know.
Thanks.
My phone is working again . Thanks.
T-mobile MDA compact 2.
Tried to flash to WM6. Unfortunately used wrong rom. ( I was naive about the process then !)
When trying to start the unit intermittent faint flashes on screen while trying to reboot itself. It contines this way until the battery dies.
Activesync Cant Detect The Unit anymore
How can i recover and get WM5 back on this unit. ?
How do you get into boot loader mode on this device ?
Can Somebody help me by giving step by step instructions on recovery.
All Help will be greatly appreciated...
Thanks
Aheron147..
I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help
You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.
Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help
Hmm, can u fully upgrade your rom ?
Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo
I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.