Hi!!
I was happily using tomtom v.4.4 with a bluetooth gps. Last day I made a hard reset, and I reinstalled Tomtom.
Now it is impossible that tomtom sees the bluetooth gps.
1) The gps is visible by other application (pocket street)
2) I installed tomtom with pocket bluetooth tools AND without
3) I tried the patch tomtom5 that is here posted (carefully following the instructions) but no....nada....niet!!
When with tomtom I go to preferences....gps.....I select bluetooth gps and the program DOES NOT show the menu with the ports it simply goes back to the gps config file, obviously saying "no gps unit" (I have it in Italian, not sure how that is translated in english)
What else can I try?
Thanks!
ahhh I have Himalaya and windows mobile 2005
Related
Previously i had TomTom3.0 with BTHTools and a Holux BT GR230 GPS
and it worked fine.
I recently upgraded to ROM 1.72.00 WWE so i no longer needed BTHTools and it still works fine.
EXCEPT : When the GPS receiver is not found (BT turned off or GPS off or out of range), TomTom freezes or slows down terribly. This didn't happened with my previous rom/BTHTools)
upgraded to TT Navigator 3.03 and TT GPS 3.03 but that didn't help.
I found others reporting the same problem in other threads,( see Kim71 in http://forum.xda-developers.com/viewtopic.php?t=3341&start=350 ) but this specific problem was lost in the mainstream of those threads.
anything usefull will be greatly appreciated
The only way I found to get over this was to deselect the gps in tomtom before closing down each time, it would then need selecting if you wish to use bluetooth gps. If this wasnt done and bluetooth gps was switched off when starting tomtom the pda would slow to a crawl, I know it isnt a perfect fix but seemed to work ok for me.
the problem is you have selected the wrong com port in the gps setting (i have 3 to choose from on mine!) first uncheck the box on the left. then drop the menu and select 'bluetooth gps'. Then turn on the receiver and the check the box again
that should sort it.
Regards
The Pilgrim
Right now i have NMEA 0183V2 Bluetooth / COM5:
Tried to uncheck : OK
Tried choosing Bluetooth GPS : OK
Tried to check : NOK it simply will not check :?
is the reciever switched on?
As I have posted earlier in other threads and other sites, I have the exact same issue.
However there seem to be people that have got it to work without any extras installed.
Only port to get TomTom to work with my DConnex DC-230 (=rebadged Holux GR-230) is COM5.
I cant tick the blue box with 'Bluetooth GPS' in the lower combo=box.
To get by for now by I digged into the registry.
I created 2 CAB's that do the following:
Set the registry value of TomTom GPS to enabled or disabled.
By starting one of these CAB's I can easily enable of disable the GPS. Would be nice to have a Today Plugin that toggles the TomTom GPS Enabled value (any volunteers???)
BUT I see this solution only as a work-around.
The solution MUST be in selecting 'Bluetooth GPS' instead of 'COM5'.
The task is to find out on how to achieve that.
Any help appreciated.
Hi
i still have rom 1.66.00wwe. and BTTools installed
i run the latest tt gps v3.3 (?) and a fortuna bt clipon.
I can check the box with 'bluetooth gps' without any problems.
You might want to visit www.pocketgps.co.uk
The forums are excellant
i hope this is of use
Regards
The Pilgrim
Pilgrim,
I allready noticed the excellent forums on pocketgps.co.uk, but until now I only got the advise to select Bluetooth GPS instead of COM5. And that is just what is not possible with my 1.72 rom . . .
:idea: Like I said: any suggestions are more than welcom, as is an offer to creat a small program (Today plugin!) that toggles the Enabled registry value of TomTom GPS.
If anyone wants to write that pgm, he might consider simultaneously turning bluetooth on / off.
State 1 : Bluetooth on / TT GPS enabled
State 2 : Bluetooth off / TT GPS Disabled
even better: Make that configurable (via registry setting or whatever lean & mean) for both states
I have been investigating this annoying issue with "ronald2oo2".
He does not have any issues like we do with his 1.72.00WWE ROM.
We did notice some interesting differences between his and my device-behaviour. Also the registry settings between him and me are quite different.
The biggest difference between the two devices is the origin of the OS rom. He uses the iMate based rom, I use the Qtek based rom.
Could anyone with 1.72.00WWE OS ROM, BT GPS and TT3 please post:
1. If (s)he has the possibility of checking the blue--ish box in TomTom GPS when the post is set to 'Bluetooth GPS': YES / NO and with what protocol (NMEA, SiRF, GPS specific)
2. What the origin of the 1.72.00WWE (OS!) rom is: QTEK, IMATE, T_MOBILE beta, . ....
I experienced the same problem for several months now and hoped that it would dissapear when I upgraded to TT3.07 and TT GPS 3.07 but it still didn't work.
Then I came across this post and started playing myself with these settings and found a solution. I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver
I have a Qtek 2020 with 1.72.00WWE OS ROM and Rikaline 6030 BT GPS and TT3.07
I was able to check the blue-ish checkbox with Bluetooth GPS setting after choosing 'NMEA 0183v2 Bluetooth' in the drop down list above 'Bluetooth GPS' and after unchecking 'Outbound COM port: COM5' in my Bleutooth Settings (Start -> Settings -> System).
I hope I am helping a lot of people who have the same problem as I did for months and didn't find a solution for it.
Cheers,
Gino
The sentence: 'I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver' should read 'I can now use TomTom Navigator 3.07 with a bluetooth connection without my Rikaline 6030 GPS receiver'
Or without bluetooth turned on at all. Sorry for the confusion. Must be getting tired
Gino
Did you have to delete the existing bonds?
Because i tried your solution and it still won't let me choose "Bluetooth GPS". Am i doing something wrong? or is it some else different between our xdaII?
I don't know exactly where the bluetooth drivers come from. Can you check if you have OEM_WWE_04071402.sa.CAB in your ExtROM?
or another OEM_WWE_04???????.sa.CAB.
No I didn't have to remove the existing bond(s). I just first unchecked the Outbound COM5 setting in Bluetooth settings, then I removed the checkmark in the GPS Settings so I could select the NMEA 0183v2 Bluetooth option and then I selected Bluetooth GPS. Checked the check box again and closed all open windows and everything was working fine with or without bluetooth/GPS receiver .
Regarding your other question, where can I find this info about the OEM_WWE_04??????.sa.CAB file. I remember looking in the extROM but I forgot where to find it. I'll do a quick search to see if I can find it again.
Cheers,
Gino
you have to install extendedromunlocker
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=extendedromunlocker
and then unhide it, and then you would be able to see what's in there.
I also have OEM_WWE_04071402.sa.CAB in my ExtROM. I remember that my Bluetooth connection was not turned on when I tried to change the settings.
Gino
I have Radio version 1.14.00. Is this different from your version? I see that in your profile you pur 1.12.00 but I have noticed that 1.14.00 is not available.
I allready heard from 'ronald2oo2' that he is able to choose the Bluetooth GPS 'port' in TomTom GPS. I went thru all the options with him but still I cant select the 'Bluetooth GPS'. Also TomTom could not provide me with an answer, they eventualy offered to test my MDAII, but thats not an option since I rely on my MDAII.
BUT: I ams till using TomTom GPS 3.03. I will try the update tomorrow since maybe this version has some changes specific for Himalaya . . .
Hello,
I've the following problem. I've a MDA Pro with WM6. It's a german Maxstegi 4.7, but I tried 2 differnt ROMs from your board but my problem persists.
Bluetooth is activated and working. This I checked with a Siemens HHB-750 A2DP Audiotransmitter. Then I tried to connect my i747
http://www.transystem.com.tw/p-gps-iblue747.htm
and googlemaps, wififofum and Tomtom can't find it, regardless of every combination of settings in external GPS and Bluetooth. The funny thing is that Navigon detected the GPS on COM1: serial cable but wasn't running because of memory problems. I checked the gps mouse with my laptop and it's running fine.
My question now: Has anyone this gps running on a Universal with WM6 or does anyone know about problems with the bluetooth stack and how to correct it, or which GPS via Bluetooth works somewhere with Tomtom?
Thanks
Alsaya
I have 727 and universall and WM6.0 (but french FLA242). no problme just have to do partenership and open a com port (for tomtom and universal it's com4. uncheck secure connect
@stephane.papin
Hello Stephane, I tried com4 with and without external GPS - no success. Secure connection is unchecked. Any more suggestions, please.
Alsaya
I've Radio 1.17. Is Bluetooth a function of radio? Will 1.18 help?
Thanks
Alsaya
I've just recieved a HTC Himalaya which was running WM2003 coupled with an external NAVMAN "ONE" Bluetooth GPS unit. Everything works fine when running WM2003, the GPS is set up and is set to (COM7) by default and registers in the TT6 GPS config fine.
After flashing to WM2005 using the "Hima Helmi WM5 SP3 (XOJ Edition)" located here, the NAVMAN will pair to the GPS as usual, but won't have a COM port automatically selected. After selecting an outgoing port (I think COM0,4,5,9 work without giving an error about being unable to create) and leaving the manage gps connection automatically checked, setting the baud rate, etc, I set the intermediate GPS port that WM2005 suggests to COM6.
After starting TOMTOM6 from SD-card, and setting up the GPS config to the right baud on "BT on COM6", the GPS will not connect with the Himalaya.
The same happens on WM2006.
Has anyone had a similar problem?
This is the closest link i could find:
http://forum.xda-developers.com/showthread.php?t=238883
Help much appreciated!
Basically, When running on WM2005 or WM2006, the bluetooth com-port will not appear in TT6.
It all works fine on WM2003.
Any ideas?
Dear all,
I have an issue with tomtom7: prog well installed, map available, but have error message "No GPS device found"
This problem has been referenced several time on other site/forum but havnt found any proper solution
Looking to the solutions proposed, I have tried:
- Hard reboot and reinstal: It has worked for one day only (in the evening I ve only installed google maps and run QuickGPS, so should have no impact)
- Configure tomtom as it was a wired gps connected to COM4 => not successful...
- installing another GPS prog (like NoniGPS) and run it in background of tomtom7 (as this one managed to connect to internal GPS device...) =>
It works... but not really good as sometimes tomtom loose the signal, and I ve to shutdown noniGPS and relunch it, then tomtom find again the gps
Im starting to think that my french provider (Orange) is blocking tomtom to force us to use their own gps prog.......
Does anybody have the same problem and found a good solution?
Many thanks,
Fabrice
i think you'd better look into the thread dedicated to tomtom on HD (blackstone)
use the search function, tomtom is working perfectly on the THD
hello and happy new year to all!!!!
i have tried all wwe roms from wwe 03 up till present wwe 05 rom which im currently using on my htc magician device.i keep trying everyone of these roms in hope to get tomtom 7 up and running.i cant get my external gps devise to be seen by tomtom i get as far as pairing via bluetooth i have gpsgate and also gps proxy gps2blue also tried gps test version 1.04 which scanns ports but still does not find my gps! my gps devise is bt 541 holox which working fine with nokia n95 but due to tomtom mobile maps being up to date. i would be gratefull if some one might help me step by step manythanks
Hi Mr Joe,
I've tried to use Tomtom 7 with wwe 03 and same problem.
The only way to use it that i've found is to download GPS proxy on this site :
http://sourceforge.net/projects/gpsproxy/
You had to add a outgoing port in your GPS BTH (port 6 by exemple)
With gps proxi , you've to create a virtual port 4 (automatically) and via the option, configure entry port 6 and outgoing port n° 4.
with tomtom, u choose port 4 for you GPS and it's works.
hi thank you for your swift reply
i tried as mentioned above and gps proxy says
the nmea input provider failed to start creatfile failed 55
lol still pulling hair out i must have spent about 60 hours searching forums and diffrent apps
after uninstalling gps proxy i reinstalled gps proxy to find error on screen saying i needed opennetcf.sdf.ppc.arm.cab im still searching for this file lol
every time i try install gps proxy it say you need blah blah file befor it will work i keep downloading these diffrent files and installing them then keep uninstalling gpsproxy 2.2. then again and again .......... im so frustrated all i want is tomtom 7 up and running with my gps device. is there anybody who has wwE 05 FOR 64MB DEVICE who has not had to spend approx 65 hours trying diffrent roms diffrent apps to get tomtom 7 working?????????????????anyone know what other files are needed in wwe 05 64 mb device to run gpsproxy????????????? anyone have a list or even a simply way?
OK I FOUND FILES HERE http://sourceforge.net/projects/gps...6/GPSProxy-1.6-ARMV4-NoInstaller.zip/download
I INSTALLED BUT I KEEP GETTING
THE NMEA IMPUT PROVIDER FAILED TO START: CREATFILE FAILED :55
ANYBODY ANY IDEAS?
STARTING TO THINK AM I JUST BEST TO INSTALL WM 2003
How can i close posts?
i tried this with gps proxy....
i have a bluetooth gps mouse from nokia...
model: ld 1w
I pair my magician with the mouse.....after that i set the gps mouse to comport 6.
Now i run gpsproxy and setup my device:
i add Virtual port com4
in nmea i use for incoming port 6
then i set outgoing port to port 4...
the i push start...
then come "fix typ: invalid"
any idea??
i found 'igo8' to work best on magician.
i use a blue-tooth gps, use standard gps port with the rom, done. no issues and quick.
i can still use my bluetooth car hands free at same time too.
(wwe rom 3.06)
I too have problems with my external GPS (sold under T-Mobile NaviGate Bluekit III mouse, but it's Leadtek under the hood) under WWE_O5 , but I think it's more related to the Bluetooth stack
here's what I did
-> add new device
-> Leadtek Bluetooth GPS shows up, next
-> Passcode is prompted, 0000, next
-> Device added, your pocket PC has connected with Bluetooth GPS
everything is fine up till this point, now the GPS shows up under "disconnected"
Now when I single tap it to turn on Serial Port, save and connect it say
CAnnot connect, your device did not connect With Leadtek Bluetooth GPS. The connection failed or the passcode is incorrect
I'm pretty sure it's not the GPS itself since it ran fine with the vanilla firmware
This is pretty much the only thing that keeps me from fully enjoying the rom, though
Hello
I'm in the same situation as you. I have tried a large number of settings to get TonTom/ to connect to my BT GPS ( I've tried Holux 236slim firmware 3.1.0, Holux236slim Firmware 3.1.1, Holux1000B). None of them are identified by TomTom. I have also tested a handfull of other GPS applications without any problems, they are running perfect. I,ve resetted all GPS's to factory basis, I've modified baudrates, S/N and so on without sucess. tested with and w/O WM "external GPS"-program. The "external GPS" does anyhow transfer the correct comport to Tomtom.
No sucess. No sucess.
By trying the other GPS alternativs inside Tomtom gps-configuration, I've ben able to for a second been capable to get the GPS signal.
-Something is wrong inside WM6.5 , S100 or Tomtom.
P-O
Edit
After first removing all setting for BT then removing the main battey, getting low capacity in back up battery, reinstalling BT-GPS ( Holux m1000b) i've got the Tontom to connect to the GPS. I've used the port (in Tomtom GPS konfiguration) given by the BT-setting, com 7 in my case. It failed when chozing the port given by the "external GPS#
The installation is not stable. after shutting down the S100 and restarted. It failed and I had to remove main battery again. Now its working.
I do not dare to test with another GPS yet.
P-O
Second edit
I have sucessfully connected all my GPS decvices. Anyhow the connection to Tomtom is more unstable on the magician then on my other phones (Wizard and Herald with WM6.1). Unstable in my case means: loss of connection, have to reinstall GP-device and reboot. Anyhow. I have beiing driving 400 km today without any problems.
P-O