TomTom3 freezes on start when BT is turned off (ROM 1.72) - MDA II, XDA II, 2060 Accessories

Previously i had TomTom3.0 with BTHTools and a Holux BT GR230 GPS
and it worked fine.
I recently upgraded to ROM 1.72.00 WWE so i no longer needed BTHTools and it still works fine.
EXCEPT : When the GPS receiver is not found (BT turned off or GPS off or out of range), TomTom freezes or slows down terribly. This didn't happened with my previous rom/BTHTools)
upgraded to TT Navigator 3.03 and TT GPS 3.03 but that didn't help.
I found others reporting the same problem in other threads,( see Kim71 in http://forum.xda-developers.com/viewtopic.php?t=3341&start=350 ) but this specific problem was lost in the mainstream of those threads.
anything usefull will be greatly appreciated

The only way I found to get over this was to deselect the gps in tomtom before closing down each time, it would then need selecting if you wish to use bluetooth gps. If this wasnt done and bluetooth gps was switched off when starting tomtom the pda would slow to a crawl, I know it isnt a perfect fix but seemed to work ok for me.

the problem is you have selected the wrong com port in the gps setting (i have 3 to choose from on mine!) first uncheck the box on the left. then drop the menu and select 'bluetooth gps'. Then turn on the receiver and the check the box again
that should sort it.
Regards
The Pilgrim

Right now i have NMEA 0183V2 Bluetooth / COM5:
Tried to uncheck : OK
Tried choosing Bluetooth GPS : OK
Tried to check : NOK it simply will not check :?

is the reciever switched on?

As I have posted earlier in other threads and other sites, I have the exact same issue.
However there seem to be people that have got it to work without any extras installed.
Only port to get TomTom to work with my DConnex DC-230 (=rebadged Holux GR-230) is COM5.
I cant tick the blue box with 'Bluetooth GPS' in the lower combo=box.
To get by for now by I digged into the registry.
I created 2 CAB's that do the following:
Set the registry value of TomTom GPS to enabled or disabled.
By starting one of these CAB's I can easily enable of disable the GPS. Would be nice to have a Today Plugin that toggles the TomTom GPS Enabled value (any volunteers???)
BUT I see this solution only as a work-around.
The solution MUST be in selecting 'Bluetooth GPS' instead of 'COM5'.
The task is to find out on how to achieve that.
Any help appreciated.

Hi
i still have rom 1.66.00wwe. and BTTools installed
i run the latest tt gps v3.3 (?) and a fortuna bt clipon.
I can check the box with 'bluetooth gps' without any problems.
You might want to visit www.pocketgps.co.uk
The forums are excellant
i hope this is of use
Regards
The Pilgrim

Pilgrim,
I allready noticed the excellent forums on pocketgps.co.uk, but until now I only got the advise to select Bluetooth GPS instead of COM5. And that is just what is not possible with my 1.72 rom . . .
:idea: Like I said: any suggestions are more than welcom, as is an offer to creat a small program (Today plugin!) that toggles the Enabled registry value of TomTom GPS.

If anyone wants to write that pgm, he might consider simultaneously turning bluetooth on / off.
State 1 : Bluetooth on / TT GPS enabled
State 2 : Bluetooth off / TT GPS Disabled

even better: Make that configurable (via registry setting or whatever lean & mean) for both states

I have been investigating this annoying issue with "ronald2oo2".
He does not have any issues like we do with his 1.72.00WWE ROM.
We did notice some interesting differences between his and my device-behaviour. Also the registry settings between him and me are quite different.
The biggest difference between the two devices is the origin of the OS rom. He uses the iMate based rom, I use the Qtek based rom.
Could anyone with 1.72.00WWE OS ROM, BT GPS and TT3 please post:
1. If (s)he has the possibility of checking the blue--ish box in TomTom GPS when the post is set to 'Bluetooth GPS': YES / NO and with what protocol (NMEA, SiRF, GPS specific)
2. What the origin of the 1.72.00WWE (OS!) rom is: QTEK, IMATE, T_MOBILE beta, . ....

I experienced the same problem for several months now and hoped that it would dissapear when I upgraded to TT3.07 and TT GPS 3.07 but it still didn't work.
Then I came across this post and started playing myself with these settings and found a solution. I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver
I have a Qtek 2020 with 1.72.00WWE OS ROM and Rikaline 6030 BT GPS and TT3.07
I was able to check the blue-ish checkbox with Bluetooth GPS setting after choosing 'NMEA 0183v2 Bluetooth' in the drop down list above 'Bluetooth GPS' and after unchecking 'Outbound COM port: COM5' in my Bleutooth Settings (Start -> Settings -> System).
I hope I am helping a lot of people who have the same problem as I did for months and didn't find a solution for it.
Cheers,
Gino

The sentence: 'I can now use TomTom Navigator 3.07 with a bluetooth connection with my Rikaline 6030 GPS receiver' should read 'I can now use TomTom Navigator 3.07 with a bluetooth connection without my Rikaline 6030 GPS receiver'

Or without bluetooth turned on at all. Sorry for the confusion. Must be getting tired
Gino

Did you have to delete the existing bonds?
Because i tried your solution and it still won't let me choose "Bluetooth GPS". Am i doing something wrong? or is it some else different between our xdaII?
I don't know exactly where the bluetooth drivers come from. Can you check if you have OEM_WWE_04071402.sa.CAB in your ExtROM?
or another OEM_WWE_04???????.sa.CAB.

No I didn't have to remove the existing bond(s). I just first unchecked the Outbound COM5 setting in Bluetooth settings, then I removed the checkmark in the GPS Settings so I could select the NMEA 0183v2 Bluetooth option and then I selected Bluetooth GPS. Checked the check box again and closed all open windows and everything was working fine with or without bluetooth/GPS receiver .
Regarding your other question, where can I find this info about the OEM_WWE_04??????.sa.CAB file. I remember looking in the extROM but I forgot where to find it. I'll do a quick search to see if I can find it again.
Cheers,
Gino

you have to install extendedromunlocker
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=extendedromunlocker
and then unhide it, and then you would be able to see what's in there.

I also have OEM_WWE_04071402.sa.CAB in my ExtROM. I remember that my Bluetooth connection was not turned on when I tried to change the settings.
Gino

I have Radio version 1.14.00. Is this different from your version? I see that in your profile you pur 1.12.00 but I have noticed that 1.14.00 is not available.

I allready heard from 'ronald2oo2' that he is able to choose the Bluetooth GPS 'port' in TomTom GPS. I went thru all the options with him but still I cant select the 'Bluetooth GPS'. Also TomTom could not provide me with an answer, they eventualy offered to test my MDAII, but thats not an option since I rely on my MDAII.
BUT: I ams till using TomTom GPS 3.03. I will try the update tomorrow since maybe this version has some changes specific for Himalaya . . .

Related

Rikaline 6010 for xdaII

I am not able to use the receiver with Autoroute 2004(pocket streets). The manual suggests that I ensure a virtual COM port is established before connecting the receiver, which I am not able to get around. I am lost and stuck with an expensive receiver. Can some help, please? ASAP
Daz, when you try to run the program does it give the option to choose your gps/com port?
no, nothing came up on the screen. Fortunately I have been able to resolve the problem. Need to disable to incoming beam option in connection setting
I currently have the same problem with rakaline 6031-x7 and tomtom navigator. I use to connect the gps reciever via blutooth manager as slave and then set it up in tomtom on my ipaq. now I can't find any options in bluetooth settings on my xda2. Any chance of a little help?
:?
gavcha, the xda2 is braindead where bluetooth is concerned, are you running the latest gps 2.09 from tomtom? If you are using that and it still isnt working, download towas patch, remove the gps from the bonding on your bluetooth, install towas patch, run tomtom wizard, gps manager in discoverable mode, add device in bt manager by choosing "new", choose the gps, ok everything, towas patch should then come up and give you the serial option, choose that. When finished go to tomtom gps, choose tomtom bluetooth and in the second drop down your gps should be available, choose that and it should work.
Cheers mate. me being the impatient ba£$%rd that I am found this site
http://bluetooth.i-networx.de/index_e.html
Very usefull, up and running in no time. Seems to be in the same vein as your suggestion. Thanks for all your help I am slowly getting use to this xda milarky! Finaly I can sell the Ipaq!!!!
Cheers again.
Good to know it works, when O2 release the update it should get better, by the way that link you posted has been a pain in the ass for me, I have clicked that link in numerous posts and NEVER been able to connect, I have the patch now but does anybody else have problems linking to the above link.?
yeah i had problems going back to it when i was checking it to put it in my last post. try googling xda2 bluetooth manager. thats what took me to another forum with the link to this. worth a try. :idea:

Pairing my GPS receiver with bluetooth + tomtom problems

I got a GPS receiver, this one: http://www.widget.co.uk/asp/product...cat=45&ph=&keywords=&recor=&SearchFor=&PT_ID=
It didn't come with any instructions.
I am trying to pair it with my phone, as Tomtom 5 asks me to, but I don't know what passkey to put in or how to go about doing it...
I have created a connection to it in bluetooth manager and tried to add it in tomtom to no avail.
I have an XDA 2i with all the default ROMs etc.
Can anyone point me in the right direction please?
Thanks.
[Edit]
After digging around on the net I found out how to pair them. It seems that the company who sold me this didn't even include the code to pair the device with! Now I have the problem of tomtom not detecting it...
It seems that COM6 is the port which the bluetooth GPS receiver is on but in tomtom it only lets me select from COM4, COM2 and COM9 - how should I go about connecting it?
NB: I have tested the GPS with some application that I found for it on the net and it *seems* to not have a fix, though it has been connected and turned on a long time.
Try this;
http://forum.xda-developers.com/vie...ostorder=asc&highlight=tomtom+5+gps&start=100
Edit
1st Post on page 1

Samsung Omnia Pro B7330 - Problems with TomTom internal GPS

Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.

htc magician WWE 05,64mb version help needed to get tomtom 7 to work with ext bt 541

hello and happy new year to all!!!!
i have tried all wwe roms from wwe 03 up till present wwe 05 rom which im currently using on my htc magician device.i keep trying everyone of these roms in hope to get tomtom 7 up and running.i cant get my external gps devise to be seen by tomtom i get as far as pairing via bluetooth i have gpsgate and also gps proxy gps2blue also tried gps test version 1.04 which scanns ports but still does not find my gps! my gps devise is bt 541 holox which working fine with nokia n95 but due to tomtom mobile maps being up to date. i would be gratefull if some one might help me step by step manythanks
Hi Mr Joe,
I've tried to use Tomtom 7 with wwe 03 and same problem.
The only way to use it that i've found is to download GPS proxy on this site :
http://sourceforge.net/projects/gpsproxy/
You had to add a outgoing port in your GPS BTH (port 6 by exemple)
With gps proxi , you've to create a virtual port 4 (automatically) and via the option, configure entry port 6 and outgoing port n° 4.
with tomtom, u choose port 4 for you GPS and it's works.
hi thank you for your swift reply
i tried as mentioned above and gps proxy says
the nmea input provider failed to start creatfile failed 55
lol still pulling hair out i must have spent about 60 hours searching forums and diffrent apps
after uninstalling gps proxy i reinstalled gps proxy to find error on screen saying i needed opennetcf.sdf.ppc.arm.cab im still searching for this file lol
every time i try install gps proxy it say you need blah blah file befor it will work i keep downloading these diffrent files and installing them then keep uninstalling gpsproxy 2.2. then again and again .......... im so frustrated all i want is tomtom 7 up and running with my gps device. is there anybody who has wwE 05 FOR 64MB DEVICE who has not had to spend approx 65 hours trying diffrent roms diffrent apps to get tomtom 7 working?????????????????anyone know what other files are needed in wwe 05 64 mb device to run gpsproxy????????????? anyone have a list or even a simply way?
OK I FOUND FILES HERE http://sourceforge.net/projects/gps...6/GPSProxy-1.6-ARMV4-NoInstaller.zip/download
I INSTALLED BUT I KEEP GETTING
THE NMEA IMPUT PROVIDER FAILED TO START: CREATFILE FAILED :55
ANYBODY ANY IDEAS?
STARTING TO THINK AM I JUST BEST TO INSTALL WM 2003
How can i close posts?
i tried this with gps proxy....
i have a bluetooth gps mouse from nokia...
model: ld 1w
I pair my magician with the mouse.....after that i set the gps mouse to comport 6.
Now i run gpsproxy and setup my device:
i add Virtual port com4
in nmea i use for incoming port 6
then i set outgoing port to port 4...
the i push start...
then come "fix typ: invalid"
any idea??
i found 'igo8' to work best on magician.
i use a blue-tooth gps, use standard gps port with the rom, done. no issues and quick.
i can still use my bluetooth car hands free at same time too.
(wwe rom 3.06)
I too have problems with my external GPS (sold under T-Mobile NaviGate Bluekit III mouse, but it's Leadtek under the hood) under WWE_O5 , but I think it's more related to the Bluetooth stack
here's what I did
-> add new device
-> Leadtek Bluetooth GPS shows up, next
-> Passcode is prompted, 0000, next
-> Device added, your pocket PC has connected with Bluetooth GPS
everything is fine up till this point, now the GPS shows up under "disconnected"
Now when I single tap it to turn on Serial Port, save and connect it say
CAnnot connect, your device did not connect With Leadtek Bluetooth GPS. The connection failed or the passcode is incorrect
I'm pretty sure it's not the GPS itself since it ran fine with the vanilla firmware
This is pretty much the only thing that keeps me from fully enjoying the rom, though
Hello
I'm in the same situation as you. I have tried a large number of settings to get TonTom/ to connect to my BT GPS ( I've tried Holux 236slim firmware 3.1.0, Holux236slim Firmware 3.1.1, Holux1000B). None of them are identified by TomTom. I have also tested a handfull of other GPS applications without any problems, they are running perfect. I,ve resetted all GPS's to factory basis, I've modified baudrates, S/N and so on without sucess. tested with and w/O WM "external GPS"-program. The "external GPS" does anyhow transfer the correct comport to Tomtom.
No sucess. No sucess.
By trying the other GPS alternativs inside Tomtom gps-configuration, I've ben able to for a second been capable to get the GPS signal.
-Something is wrong inside WM6.5 , S100 or Tomtom.
P-O
Edit
After first removing all setting for BT then removing the main battey, getting low capacity in back up battery, reinstalling BT-GPS ( Holux m1000b) i've got the Tontom to connect to the GPS. I've used the port (in Tomtom GPS konfiguration) given by the BT-setting, com 7 in my case. It failed when chozing the port given by the "external GPS#
The installation is not stable. after shutting down the S100 and restarted. It failed and I had to remove main battery again. Now its working.
I do not dare to test with another GPS yet.
P-O
Second edit
I have sucessfully connected all my GPS decvices. Anyhow the connection to Tomtom is more unstable on the magician then on my other phones (Wizard and Herald with WM6.1). Unstable in my case means: loss of connection, have to reinstall GP-device and reboot. Anyhow. I have beiing driving 400 km today without any problems.
P-O

WWE05ROM64mb tomtom settings help +how can i delete old threads i made?

hi,
im using mda compact(htc magician and 05 64mb rom cotulla ) i have tomtom 7 with new maps demo works great ,only problem is can not get tomtom to see my bluetooth gps!
(gps works with a program called sky traq only settings i needed to set up is find bluetooth device and then connects, picks satellites up in a split second )
my question is there a program that will tell me what port my gps device using? is there away maybe with a registry editor to find out what port tomtom 7 is using?and possibly if needed a program to see what com port my bt 541 gps device uses or needs??
bluetooth setting
do i pair(i imagine i need to so i have
secure connection tick or untick?
bt com port?
only have choice com 6 com 7!
what are the recommended settings in external gps ?
program port?
hardware port?
manage gps automatically do i tick or untick? i have tried lots of settings i got as far as seeing no gps device in tomtom but with satellites greyed out like its stuck but i cant remember settings i used
hope some one can help me out ?????thanks for taking the time to read my post

Categories

Resources