Related
this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip
Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers
has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu
A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116
actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)
...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz
Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!
Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.
We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...
it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André
sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!
Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
hi,
Having just purchased my M500 today im a noob to all things magician and m500!
Looking around this interesting site i notice a lot of talk about big storage. Sorry if this question has been asked before, but what is big storage?
Lets say i di the big storage thing......would i then loose my current orange rom on my device?
Is it easy to do? I've updated the rom on my c500 and that was straight fwd, can sombody explaain to m500 noob, but is willing to learn!
luvin the site.
I have a m500, and i have changed the original rom (as suplied with the m500) to bigstorage.
It wipes out the hidden partion that is used to brand the phone and increases the "storage" partion (which as default is around 7mb) to 27mb, the only downside is that the branding apps that are hidden are no longer on your device.
This means that when you hard reset the device you will have to manualy choose the files to install.
Imp
Thats a great explanation, thanks.
I've been messing around so far, and i think i understand the whole process. Coudl you just confirm this for me?
I have downloaded the big storage rom WWE.111 from the ftp and swapped the first 416bytes in hex editor with the first 416bytes from my rom which i've got from my ohone. i then load the edited WWE.111 big storage rom back into my m500 using the sd card method. An that will give me a bigstorage rom?
could somebody post the extrom of the m500 please ?
thanks
M500 Rom upgrade
I have been trying to upgrade it to 1.12 ROM, however when I used ntrw to write it onto my SD card, it said parameter incorrect, then when I flash my M500, it said Check Sum error. Any remedy? Also has anyone tried the Radio 1.13?
EggZenBeanz, thats right. should give you bigstorage....remember to ignore the error messages on your phone after you copy the rom from your sd card.
Dutty, there is already the orange m500 ext rom on the ftp site.
vz7, they are the same errors that i got when i big rom'ed mine (even tho i am still on rom 1.06 (not worried in upgrading the rom as yet)
as i said in the other post, i upgraded to 1.13 radio rom last night with no problem.
EDIT
if anyone wants my desciption of the orange ext rom (what each cab files do) give us a shout. i went though them one by one and isntalled them, to see if i wanted them or not.
Imp
Thankyou for clearing these things up. As the post suggested im a noob to all this, so i wanted to get it clear in my mind on top of reading all the tuts i could find.
So, when the rom hack has been applied and is working. i get 25mb extra storage, and i should loose all the clearview stuff etc.. Thats cool cheers.
Impossible said:
EDIT
if anyone wants my desciption of the orange ext rom (what each cab files do) give us a shout. i went though them one by one and isntalled them, to see if i wanted them or not.
Imp
Click to expand...
Click to collapse
I wouldn't mind a discription of the cabs on the rom as im just about to "Go large".
I wouldn't mind a list of what each file does either - I'd thought about doing a big storage hack on my m500, but there wasn't anything available last time I checked.
Presumably I can copy all the files for the storage area onto my SD card, and save them for later?
Where abouts is the ROM on the ftp site? I couldn't see anything that specifically mentions the m500...
Edit - OK, I think I understand now...I found a useful guide that I followed.
The only problem is, I've only got a 1gb sd card, so the hex editor won't open the rom image after I've dumped it! Is there any way around this, or do I need to get 128mb card?
The file of the descriptions is a bit scruffy atm, i will tidy it up and post it again soon here. (scruffy file attached to this post, you need to be logged into the forums to dl'ed it)
the path to the m500 ext rom is ..... i cant connect to the ftp atm.
I backed up the ext rom on my desktop pc, and put the vital cabs on a sd card that i have spare and keep in my wallet, just incase the rom resets.
I had a similar problem to dan13l when i dumped the rom, the ntrw.exe app is a bit of a pig, as it dumps a image of the sd card, and not of the actual rom.... i used a 256mb card, i suppose you could partion the 1gig card to around 256mb then try it out?
something that i didnt read was, when performing the rom dump, is that the sd card will be fully erased during dump. So back it up if you need the data on it.
one word about one of the cabs in the ext rom, OrangeUK_ActionE_Connection.cab is a odd one. It encloses some apps that i didnt like installed on my m500 but it has the gprs settings inside it, i have managed to pull these out and put them in there own cab. This helps prevent installing the annoying "action" programs
Imp
Thanks for that Impossible.
I noticed you've mentioned another MMS version in that text file, is there an updated mms app somewhere?
I found the ext rom on the ftp - that'll come in handy I'm sure.
There appears to be three ways of applying the big storage hack:
1) Apply a rom with Big Storage already hacked into it. This involves copying the first chunk of the standard rom using a hex editor and pasting it over the new rom. Correct?
2) Manually edit two bits of hex on a dumped rom, and reflash using the modified version.
3) Run a tool against a dumped rom to make the changes for you.
Now, I was working towards 2 until I had my sd card problem. I'm going to buy a 256mb card on my way home tonight and try with that. Am I right in thinking that if I dump my m500's rom, then apply the hex changes, that rom could be used for all m500's? As I understand it, option 1 is only relevent if you're applying a rom from one device to another (so a Jam to an M500, for example)?
So, in theory, once one of us has managed to modify the m500 rom (as you've done already, Impossible) then that rom image could be uploaded and used on all m500's? Also, if someone uploads an unmodified m500 rom, that could be used to revert back later if needs be...
Is all this correct? I think I'm starting to get my head around things.
the comments in the cab file description are a bit funny, its my own personal scrall that i found out over the test i did on the cabs, i think i found newer vesions on the ftp and installed these apps instead of the ones that orange comes with, and the "about" on the app confirmed this.
I will revisit the file soon and tidy it up making it more helpful.
i dumped my m500 rom (with the intention of keeping the 1.06 version that came with my m500) then i used mksBigStoragerENG.exe to patch it to bigstorage.
If anyones intrested in me uploading the 1.06 rom with big storage i will, but you have to remember that this has not got any orange branding on. the next step if you did use this rom would be to apply the choosen cab files to apply the settings/apps you want.
Also, i dont mind uploading the original rom (complete with the ext rom) but i think that was on there when i last looked at the ftp.
dan13l, i did just realise, even if you formated your 1gig card to a smaller size, the dump will clear that out
prehaps you could find a different hex editor? or even use the mksBigStoragerENG.exe app that I used to patch mine, instead of a editor (which reverts the rom file from your storage card size, back down to its original size of around 62mb)
Imp
Yay! It worked
Now I just need to reinstall everything.
I'll post everything I did later, got to go and eat something now!
Impossible - thanks for your help. Do you have the GPRS settings you extracted? I don't want to have to install the whole action engine thing...
Thanks again all.
All sorted - I managed to extract the gprs settings myself and create a cab.
FYI - the latest MMS app I found was dated May, and doesn't appear to work on the m500. I've not tried the March version yet.
GPRS settings etc are available on buymobilephones.net
V
Noob alert
Is there a nice HTML guide which tells a muppet how to do this? How to keep any Orange apps copied somewhere else and re-install after the hack IF wanted? A list of the additional Orange apps and what they do?
Thanks.
Meth
can someone post the link to the orange extrom - i can't find the ftp....
cheers
al
ftp://ftp.xda-developers.com/Magician/Extended_Roms/M500_WWE1.06.175/
Methanoid said:
Noob alert
Is there a nice HTML guide which tells a muppet how to do this? How to keep any Orange apps copied somewhere else and re-install after the hack IF wanted? A list of the additional Orange apps and what they do?
Thanks.
Meth
Click to expand...
Click to collapse
Go to the link posted by sporkguy and download everything - that's the contents of your extended rom.
Next, go here: http://tinyurl.com/dhgoc
That's about the best guide I've found (although there are a couple of good ones on this site). Follow the steps on there to use the mksBigStorager executable to patch your rom.
I think it would be possible to upload a pre-patched rom image for the m500 to the ftp, and simply write that to an sd card (using the last section of the guide linked to above).
Please can you take a loo at this screen grab. What do i stand to gain from the storage hack? This piccy is pre storage hack.
Dear all expert,
While trying to flash my German Black O2 mini from Ger to ENG. (Using MAupgrade_noID)
After some steps, the o2 mini turn black and display
"Serial V1.02"
At this time, even though I softreset or hardreset the device,
the same wording also appear and can't further boot.
I even use SD card method but the same wording still appear again.
Can any expert teach me how to rescure my device?
Thanks
Are you sure you did the SD-method right?
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available. Now do the following:
Get ntrw from this site
Get a 512 MB SD-card (maybe a 128 MB one will work, too, but I am unsure about this).
Put ntrw into C:\
Extract the RAR into C:\, which should produce C:\11301bs.nb1
Enter the following into the command line at C:\:
Code:
ntrw write 11301bs.nb1 [your SD-card drive letter, e.g. I:]
, ignore error messages
Fully load your Magician!
Disconnect your Magician from anything, especially USB
Shutdown your Magician (press power button)
Put the SD-card into the Magician
Put Magician into Bootloader-Mode (Camera+Power+Reset at once, until you have the "Serial 1.02" screen w/o backlight)
Wait some seconds for "Press power to flash" to show on screen. Do just that.
This might just work.
Thanks KK.
What's wrong is that, it seem the bootloader is dead.
WHile I input the SD card while enter into the bootloader.
The screen still display "serial V1.02" and hold it.
No further wording like "Press power to flash it" etc.
Is it the bootloader is dead?
I do not think so. Make sure you shut down the Magician before placing the SD-card with a fresh ROM-image written to it into your device. Power on into Bootloader-Mode afterwards.
Another option to check your loader is the following:
Shutdown the Magician
Go into Bootloader-Mode
Wait for "Serial 1.02" to be displayed
Connect to PC via USB. The Bootloader should display "USB" shortly after connecting. If it does not: Maybe really you managed to kill your loader.
What exactly did you do? I used the NOID-Tool too, and had absolutely no problems with it. Besides: I also have a bootloader version 1.02.
kk
While plugging the usb cable to the device , yes, it show "USB" on the screen then.
However, when I use the romupdate.exe and try extract the rom into SD card at this time. After pressing "d2s" , the device shut down at once. No words appear on the screen.
Do you know what does it mean?
Besides, can you tell me what is "NOID-Tool" ?
thanks
The NOID-Tool would be MAupgrade_noID, which you used.
I am not sure about it, but as your device does not boot into the OS anymore, it seems reasonable to assume, that the ROM in your device is not valid anymore, due to errors while flashing it in the first place.
So - if there is no valid ROM, there is nothing, which the bootloader can write onto the SD-card.
Please try the method suggested in previous postings before anything else. If all this fails, I have no further suggestions - your device might really be dead.
You can try regular upgrade insted of doing it through SD card.
Danload shipROM, extract it and use MAupgradeNOID to run ROM and that is all you should do.
kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M
kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M
Hi there!
The FTP-master kindly converted the file to ZIP format. It is now available here: ftp://xda:[email protected]/Magician/BigStorage_ROMs/DE_T-Mobile_1.13.01.zip.
Remember: I used a 512 MB SD-card to create it, so maybe it won't work with smaller ones (but I think it should, since the ROM stored within this SD-card-image is no more than 64 MB in size).
Hi KK,
I found it along with the other BS roms and feel ashamed I couldn't find them. I tried it first with my 512MB card, but the cardreader won't write the file (no question about formatting whatsoever). Tomorrow I'm going to try with my 256MB mini SD card, which I know will be written by NTRW. I'll let you if I succeeded.
Regards, M
It works for sure with my 512 MB Kingston SD-card!
Don't bother about an error at the end of the ntrw-writing process. That's absolutely normal, since it would like to make the SD-card-drive the current drive, which is not possible after the writing process, as the SD-card now contains a ROM-image instead of a valid filesystem.
Hi KK,
Didn't manage to get it flashing. I used both cards but my magician doesn't accept the image somehow. No sign of any message like 'press power to load', not on serial nor on usb connection in the bootloader. It did work before with my own dumped rom, but lost the storage than, but it did accept the rom. Now it keeps awful quiet, I copied the first bytes and all, so maybe I'll give it a try with another rom. I want to sort this problem out.
Cheers, M
nbfdec made my big storage
Hello KK,
Yesterday I tried with the steps from hlt, out of the radio 1.13 upgrade thread http://forum.xda-developers.com/viewtopic.php?t=32274. It doesn't involve any rom dumping or sd-card action whatsoever and it worked first time.Just one tool: nbfdec and a shipped rom. It is fast and simple. Thanks for your advices, hope others will try this method as well, because it is much easier than bigstorager and bytecopy etc.
M
The "no SD-card required"-method in this thread only works for shipped ROMs. The ROM i prepared is a combination of the latest german OS & Radio versions plus BigStorage, which is to my knowledge _not_ available in this combination elsewhere, and should therefore be the most up-to-date ROM usable for any german magician user with very few simple steps.
Since you require a non-german version, my ROM will not be appropriate for you, but this thread started out with a cry for help with a non-booting magician, and I thought, that my ROM-modification would be of some help here due to the simplicity in applying it and its actuality.
But be it as it may.
KK,
I had the same problem as Netmon, only bootloader and I couldn't make the sd flash. That's why I was looking for a decent rom. With the tooling found on this site I probably could turn my magacian from German to English again. Since all my storage was gone I could take the risc.
I solved my problem with the upgrade 1.13 thread and that method would have worked for Netmon to I guess, just put the magacian in bootloader connect to usb and flash with a German shipped rom or an altered version.
Anyway thanks for your time, M
Dear rilazi and all
The device has been proofed for dead by the manufacturer.
The symptom is
1) romupdate.exe can't detect the device
2) press softreset button can't reboot the device to normal screen, only display "Serial V1.02" on the screen
3) Use SD card method doesn't got any respone from the device, keep displaying "Serial V1.02"
4) Use shipped rom (with MaupgradeNo_id.exe) also can't detect the device.
I don't know whether it the V1.02 version of bootloader problem or not.
Before, I try to flash many time which it V1.01 with no problem.
So, all of the V1.02 German device (Black color Mini) should pay attention to it.
I have a bootloader v1.02, too. Absolutely no problems with flashing on my side.
Hi all,
Almost everytime I check the forum I see a lot of rom upgrade & BIG Storage questions. Apparently not everyone is familiar with the wiki and search options on the board. That's a shame cause almost all the questions are answered in the already existing threads. So why a new thread about the same topic?
1. I'm chauvinistic and want my name on the board ;-)
2. To aggregate a part of my knowledge in one place for easy access.
3. To promote the wiki
- So if you tried to upgrade your rom and got an error 120: follow this description http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
- If you failed in upgrading your rom somehow & now you're stuck in the bootloader: just make sure usb connections are allowed in Active Sync, connect your magician with usb to your PC and run the rom upgrade program again.
Sometimes it helps at this stage to downgrade ActiveSync to version 3.8 (see the post from benenglish).
- If you need to go to bootloader for any reason (including incorrect rom upgrade) press 'camera, power and soft-reset' all at the same time for some seconds, till your screen fades and reads: Serial V1.0x. When you connect it to usb it should read ' usb V1.0x
- If you want to change the language from your magician (not including from or to Greek, cause those roms and devices are protected), just use http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade again.
- If you want to flash your magician with a charmer or any other rom, please don't you will loose your device when you kill your bootloader and that's very likely to happen while flashing a not suitable rom.
- Want a WWE BIG Storage rom the easy way? Follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade and download ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip This NK.nbf is patched for BIG Storage, you only need to put it in the directory with the extracted shipped-rom.
- Want a BIG Storage rom in any language the easy way? Download a shipped-rom from the ftp or any telco and follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
- Want to get BIG Storage via a SD Card flash, read it here http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash
- Don't know what BIG Storage is? It is your ext-rom (with the operator customization cabs) exchanged for a larger internal Storage folder. So remember to backup those cabs before upgrading.
- When you want to revert from BIG Storage to the original Storage and ext-rom combination, make sure you put > 8MB data in your Storage folder before flashing it back with a normal rom. Otherwise you'll loose your Storage folder completely :-(. Seems that this might be a solution & doesn't work for everyone. Try it if reverting with empty \Storage folder isn't successful.
Any questions left, I guess so. Now don't be scared and put them on the board, nobody is going to eat you (at least not straight away) and someone will answer.
But remember that when this topic is still visible in the first page of this board I will probably stop answering new threads about BIG Storage and rom upgrading questions, I've done that for 5 months now and I'm starting to loose my interest.
Regards, M
Ps If you're really stuck in a rom upgrade & can't get it working, last resort is to pinpoint me to a location where I can download your rom-dump or the shipped-rom & I can prepare it for you. All it takes is a cup of coffee on my, for now, virtual world trip. Got Italy, Cyprus, Argentina, Asia, UK, Germany, Belgium, Greece, Turkey & US allready. So if you're living in any other country, especially Indonisia, Australia or New Zealand, be my guest.
Great job OLTP..
Your the man :lol:
- If you failed in upgrading your rom somehow & now you're stuck in the bootloader: just make sure usb connections are allowed in Active Sync, connect your Magician with usb to your PC and run the rom upgrade program again.
Click to expand...
Click to collapse
AND USE ACTIVESYNC 3.8
My upgrade was stuck at this stage - removed Activesync 4.0 - Installed 3.8 and ran the firmware update again - its now "Upgrade Radio Stack - Please wait" with the progress bar going along on the screen.
Hope this helps
I've heard/read more complaints about Act.Sync 4.0. Though 4.0 is working flawless on my side, every contribution that works is valuable information. I updated the first post with it.
Thanks
Big storage
I did a big storage for my Mini by using a copy of my rom, changing the bytes as told in the guide to upgrading with a HEX Editor. I have installed programs to new storage gained but my main memory is showing very little memory. I have no programmes installed in main memory. What should I do now ?
How much memory have you got free. I got now, on my fully loaded device, 9.6MB storage & 22.5MB program memory occupied.
Did you happen to load all the cabs you copied from your ext-rom again? Those cabs install in RAM.
Cheers, M
stotage lost
pls help... i lost my storage when i flash my mini in my stock shipped rom i followed instruction of olps to soted data at least 8mb of files but it didnt works still lost my storage...
how can i back it again..is there any hope?..
thanks
First thing to do is to load the BIG Storage rom again. This should give you back the \Storage folder.
Now did you use the same rom version for BIG Storage as your original rom version? Some do claim it needs to be at least the same country version.
So pls try to revert to the same version only without BS & you can always try with an empty \Storage folder.
Seems that some tricks work out different on several devices.
Good luck, M
First thing to do is to load the BIG Storage rom again. This should give you back the \Storage folder.
Click to expand...
Click to collapse
thanks i got my storage is back...
Now did you use the same rom version for BIG Storage as your original rom version? Some do claim it needs to be at least the same country version.
Click to expand...
Click to collapse
yes i flash it wid the same version i followed the instruction on your post to be able to back the extended rom..
ill try again for the 2nd time...ill post if i succed
many thanks oltp
Can I upgrade my Mda compact 2 also with a sd-card like the compact ?
When I make a hardreset with the card in the slot, i cannot chosse to install from sd-card.
That's something I don't know. Try one of the board's for WM5 devices like the Wizard. Maybe you can find your info there.
Success, M
[edit] could you append it here too pls, if you find it?
Hi OLTP,
Right now I have 8.04mb free in storage memory (big hack). In MAIN memory around 3.10 mb in program memory (in use 23.47 mb). Storage (main) - in use 28.29 mb and free 2.55 mb. This keeps going less and less so from time to time as I use and close programs. So I keep doing a soft reset. I get critical memory short error. What do I do.
Should I flash with my saved original ROM (the one I had before doing the hack) and then immediately flash the saved Big Rom ? Please let me know. You are the Guru.
@ Galahad: What kind of software did you install after the update? & how's the memory pressure right after a hard-reset (don't forget to make a proper backup first)?
Do you use cabinstl to install cabs to another location then 'default' (which is RAM)? & tell Act.Sync to install to Storage or Storage Card, otherwise your RAM will be used up very soon.
My advice no need to reflash right now, a hard-reset should be sufficient to see what is causing your prob.
M
After the hack I had installed couple of commercial software, all into storage memory thru active sync which prompts you where you want to install. I choose storage memory (26.92). I keep doing this for all the commercial software I need to install. When I finished doing this I had 6 mb free. so far so good. Then I started installing cabs files from Ext Rom copy on harddisk, with cabinst. These were smart dial cab, O2 connect and a few other (which I thought necessary) cab files. These too I installed into storage memory. If my memory serves me right, I started experiencing a sudden slide down in memory after this. Before this I had around 25 mb memory free. Then suddenly the slide down in memory. In fact Resco today plug in shows me the dramatic slidedown as if the memory is getting sucked down a black hole.
I will do a hard reset as suggested by you and then load my software into storage memory. This time I will not install cab files from Ext Rom. Is that OK ?
Your O2 software is def. causing your probs. If you need some apps from it, try WinCECabManager. With it you can see which files are stored where on your device. After cab installation you can move them to eg. \Storage\Windows & change all links & reg keys referring to those files. Or change tea cab-file of course. It can take some time, but ves a huge amount of RAM.
M
Thanks ! I will try your suggestion. Have never used WINceCab Manager. Hope it is not too technical.
Not for me, it's a bit like explorer. But then again I'm not standard.
Some good news !
Like I said, I had around 24 mb free memory after the big storage hack (after installing all applications, whether in storage memory or storage card).
The good news is that all my FREE MEMORY has come back. Don't know really how it happened. I was using my blue tooth device which I switched thru the icon on the screen bottom right.
In error I touched the icon to rotate screen orientation. When I finally got my orientation correctly, I also got all my lost memory.
IMAGINE THAT !
Thanks for all your quick responses and great help you gave me. I will surely emulate you helping ways.
oltp said:
Hi all,
- Want a WWE BIG Storage rom the easy way? Follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade and download ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip This NK.nbf is patched for BIG Storage, you only need to put it in the directory with the extracted shipped-rom.
But remember that when this topic is still visible in the first page of this board I will probably stop answering new threads about BIG Storage and rom upgrading questions, I've done that for 5 months now and I'm starting to loose my interest.
Regards, M
.
Click to expand...
Click to collapse
Dear OLTP, I am not able to find the patched nk.nbf on the ftp. Kindly check it is not there.
When I use nbfdec.exe for decoding the NK.nbf it gives me crc error and the decoding fails. whereas with the same set of NK.nbf,ms.nbf and radio.nbf I have success fully upgraded my magician to WWE1.13 with radio1.13 Kindly help
Hi all, im new here in terms of posting but have been reading for a while now.
I have a Plam Treo 750 vodafone which is unlocked. I installed vodafone wm6 update on it a month ago... but since then i've stopped using the phone due to this:
I'm used to fast systems such as my linux desktop and i was really frustrated how the wm6 interface is slow. Even with few progs installed the phone gets very sluggish and hanging up calls even takes time.
Now here's my question:
Is there any way to speedup WM6 ? or install a custom WM6 that is faster ?
I tried Rest of the World wm6 ROM but it wouldn't install on my phone when i opened the installer it would say not compatible.
Would this speedup my phone ?
http://forum.xda-developers.com/showthread.php?t=345748
What should i do... i really love the phone and its features... but i just want wm6 to run faster so that the phone is usable.
thanks
blip said:
Hi all, im new here in terms of posting but have been reading for a while now.
I have a Plam Treo 750 vodafone which is unlocked. I installed vodafone wm6 update on it a month ago... but since then i've stopped using the phone due to this:
I'm used to fast systems such as my linux desktop and i was really frustrated how the wm6 interface is slow. Even with few progs installed the phone gets very sluggish and hanging up calls even takes time.
Now here's my question:
Is there any way to speedup WM6 ? or install a custom WM6 that is faster ?
I tried Rest of the World wm6 ROM but it wouldn't install on my phone when i opened the installer it would say not compatible.
Would this speedup my phone ?
http://forum.xda-developers.com/showthread.php?t=345748
What should i do... i really love the phone and its features... but i just want wm6 to run faster so that the phone is usable.
thanks
Click to expand...
Click to collapse
Got it right mate! Nice research!
can anyone please help me install "WM6 AKU0.7.0 WWE Cooked ROM Lite"...
http://forum.xda-developers.com/showthread.php?t=345748
I've never done something like this before and have no idea how to begin.. I can't find any guides only random text throughout the posts so i don't know what applies to me and what doesn't. I'm really worried about damaging my phone by doing something stupid.
My Phone:
750v from vodafone UK with vodafone wm6... but it was unlocked by previous owner... since i can use it on other phone providers in other countries. I have usb cable and 1Gig microSD.
The installation notes of the rom say i need to install Hard-SPL then flash radio then flash OS. Now for Hard-SPL do i need to install it if my phone is unlocked because i read some confusing posts there... then what is a radio flash do i need to do that ? how does it affect radio...
then after that i need KaiserCustomRUU.exe to flash the rom... i only found a post about CustomRUU with "RUUWrapper.zip" is that the same thing... sorry but i'm really confused and need someone to guide me through the process for my first time if possible.
You are ready to go. Download the ROM from Chaimd on the 750 Upgrading thread, rename it to CHEEIMG.nbh (the ROM file name the 750 expects to see) and copy it to the root of your miniSD card.
Insert the miniSD card, hold down the bottom right button on the side while you do a reset and the bootloader will start. And away you go.
Make sure you backup (backup program is best) all your data - it starts you out with fresh device and default settings. ROM works perfectly - fast and lots of extra storage.
txzman said:
You are ready to go. Download the ROM from Chaimd on the 750 Upgrading thread, rename it to CHEEIMG.nbh (the ROM file name the 750 expects to see) and copy it to the root of your miniSD card.
Insert the miniSD card, hold down the bottom right button on the side while you do a reset and the bootloader will start. And away you go.
Make sure you backup (backup program is best) all your data - it starts you out with fresh device and default settings. ROM works perfectly - fast and lots of extra storage.
Click to expand...
Click to collapse
Thanks txzman for the info. But just to be sure i understand... you're saying i don't need to install Hard-SPL from:
http://forum.xda-developers.com/showthread.php?t=334100&page=1
Nor do i need to flash the radio ?
UPDATE:
ok i didn't install Hard-SPL or flash the radio.
I tried to install the rom straight away... i put the ROM on my memory card root and renamed it, then did the reset with sidebutton...and i got to the wierd colors screen and nothing happenes after that.
It says on the screen:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
In the end nothing happens... this method doesnt work. i tried using KaiserRUU.exe update method but also that doesn't work it gives me and "Error [260]: Connection" even though activesync is connected... please tell me what i can do to install this rom.
i posted the question in the thread for the cooked rom. i guess this is not the right place to ask thus no one is replying.
sd needs to be formatted fat32 - re-format card to fat32, re-copy cheeimg and try again. Google or search here for the available formatting apps.
INSTALL HARD-SPL FIRST....
i can't stress this enough...
blip said:
Thanks txzman for the info. But just to be sure i understand... you're saying i don't need to install Hard-SPL from:
http://forum.xda-developers.com/showthread.php?t=334100&page=1
Nor do i need to flash the radio ?
Click to expand...
Click to collapse
If your Palm Treo is unlocked, you still need to install Hard SPL but just run step 1 and ignore step 2 & 3. This will allow you to flash your Treo with ROM's other than your provider as well as modified/cooked ROM's like the one made by Chaimd.