Related
Hi folks,
Hope you can help me with a big problem.
2 weeks ago I bought a I-Mate Jam 128mb and I wanted to upgrade it with a dutch firmware. I followed the instructions, bypassed the country-error and it began to upgrade. Halfaway the upgrade the I-Mate didn't respond and the computer crashed!!
Now the pda is stuck in the boot-loader and I can't update the firmware anymore. I get error 114 and it doesn't respond.
Can anybody help me?
Thanks in advance.
Greetings,
DutchTiger
If it's still in bootloader, then keep trying with a shipped-rom (exe-file). Now you can even try without the maupgradeut_noid cause you're id is correct. One of our Belgian members had the same & fixed an error 113.
& If you happen to live near Nijmegen drop by.
Regards, M
I tried this a lots of times, but it gets stuck at stage 1. And never proceeds.
Did you back-up your previous rom, so you could try it with SD-flash?
Yup, made a backup, but when I flash it says on the screen something like: update not allowd
That's probably because the id of your magician is changed by flashing with the shipped-rom. Dump your current rom on a second SD or make a copy of the original dumped rom on your hard-disk & dump the current rom on your SD. Then copy the first 416 bytes of the current rom on a copy of your original rom & save it. Always keep one original copy of that original rom-dump! Now write the changed rom-image back to SD & try to flash it.
M
We'll my romupdate.exe doesn't recognizes my usb, so there it stops.
I have still almost one year of guarantee, so I'll think i'm going to use it.
Hopefully the guarantee covers this problem... what do you think?
Always worth to try the warranty. It wasn't an official I-mate shipped-rom I guess, but then again now you have nothing more than an expensive brick :-(
Pls post the result, maybe we all can learn from it.
Still strange that romupdate doesn't recognize the usb anymore. You still got usb connection unchecked in Act.sync? Tried rebooting the PC, etc etc. Cause the bootloader does the communicating with usb, this is very strange.
Succes with the warranty claim, M
I just got a new I-Mate... I'll never do a firmware-upgrade again.
Thanks for the help.
Grtz,
DutchTiger
Veel plezier met deze!
Inderdaad blijven er risico's aanwezig, maar het kan ook goed gaan
Groet, M
How can I go back to the original Qtek 9100 ROM after using several versions of WM6?
Same way you did upgrade, you can downgrade...
I wish it was that easy. I get an error message.
...well it would be nice to kno what kind so we can better assist you...
I fixed it already. Turned out that I could go back to original QTek 9100 NL version. (2.18) The file I downloaded first was corrupted I think.
Case closed
Hello everyone..Im newbies here.I lost my radio when trying to upgrade to cotulla`s rom.Here is brief explanation on what i have gone through.
-i use magician(02 xda ii mini)with default wm2003se and 1.11 radio.
1.I try to upgrade to cotulla`s 03 wwe where its need 1.12 radio version
2.I flash the radio using MusikMonk instruction in upgrd radio 1.12x thread.
3.1st i use usb flashing method and receive annoying 141 error.
4.I move to SD flashing method where i notice the radio have lost from my device.(red text in start screen show only wwe info istead of other before/there is no radio info in device information in os)
5.I try all other radio installation in ftp and receive same 141 error.
6.follow MusikMonk advice by backup the current os using romupdateutility and got the .nb1 file.-read using ntrw in cmd.
7.copy the 416byte header and edit to radio (.nb1) file attached in MusickMonk instruction.write to sd card but when try to flash in bootloader receive section=1 not allow update!.
8.Try same method with different radio file i found in ftp(I convert .nbf to .nb1 using nbfdec)
9.again stuck when flashing(section=1 not allow update!.)
10.try to update with shipped rom but receive 141 error(stuck in 50%/step 1:updating radio.Since i think i have no radio this error occur)
11.still going around with other radio file->convert->edit->flash->stuck...
I still browsing around this forum to find solution.Got fever because its exhausting me..i need to done this fast since this is the only phone i have and cant afford other.
So.I really need everybody expertise and advice especially for those have experience with this problem..Really need all of u.Thanks for view.
p/s:thanks for kind guys,MusikMonk who help me much in his thread..
plis forum expert,i need your help..
you try download WWE_04 include radio 1.12 and flash this rom.
Look http://forum.xda-developers.com/showthread.php?t=514864.
there is where i lost my radio daley.Upgrade with wwe 01,02,04 still wont work.stuck in 141 error.(i have no radio,i think what the heck can those rom upgrade?)
before wwe3.03 installing your pda call normal? but with 2003SE and r1.11 shiprom, radio still work? try other no success. I think you have a pda with damage radio hardware
before it try to flash the radio,my magician work normally as it is..
Hi,
is your battery ok? I've just the same problem to flash a radio... the battery seams OK, but it's too old. I've inserted a new one from my other xda mini, and the flash works well.
Try again with a new battery...
So long,
MrFX
mistereffiks said:
hi,
is your battery ok? I've just the same problem to flash a radio... The battery seams ok, but it's too old. I've inserted a new one from my other xda mini, and the flash works well.
Try again with a new battery...
So long,
mrfx
Click to expand...
Click to collapse
谢谢!谢谢!谢谢!谢谢!
Hello,
i have saw this uninstallation, but have something i dun understand, so any one please help me.
Uninstallation
*Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
*Connect via USB to PC
*Install ORIGINAL 1.12 or 1.13 ROM. No big storage etc. Install original one!!
[YOU *MUST* REPLACE ROMUpgradeUt.exe TO MaUpgradeUt_noID.exe]
*Now you can flash any other old custom roms.
NOTE: This is ONLY ONE right instruction how to uninstall my rom, otherwise you can have problems with new rom.
the highlighted part i don't know where to get the original.
anyone can guide me on more in detail how to downgrade ?
really appreciate who can help me.
thanks.
Just install WWE 3.03 ROM. I did it on my magician (problem with 3.04 and SAMSUNG touchscreen) and it works fine.
just flash 3.03 just like you flash 3.04..
ok thx man
how about downgrade to wm2003 ROM?
how about downgrade to wm2003 ROM? where i can get the original ROM for magician? I have been searching only to find broken links... can someone post link for Original ROM? Thank you in advance!
arjaylight said:
how about downgrade to wm2003 ROM? where i can get the original ROM for magician? I have been searching only to find broken links... can someone post link for Original ROM? Thank you in advance!
Click to expand...
Click to collapse
I hope this would help, I've found the Original wm2003 ROM in other forum, I've downgraded sucessfully after installing Cotulla's WWE 3.03 ROM on my Magician.
http://rapidshare.com/files/18878892/UK_11200_131_11210_ship.exe
Wm 2003 rom
arjaylight said:
how about downgrade to wm2003 ROM? where i can get the original ROM for magician? I have been searching only to find broken links... can someone post link for Original ROM? Thank you in advance!
Click to expand...
Click to collapse
I hope this would help, I've found the Original wm2003 ROM in other forum, I've downgraded sucessfully after installing Cotulla's WWE 3.03 ROM on my Magician.
http://rapidshare.com/files/18878892/UK_11200_131_11210_ship.exe
Thanks!
teguhokta said:
I hope this would help, I've found the Original wm2003 ROM in other forum, I've downgraded sucessfully after installing Cotulla's WWE 3.03 ROM on my Magician.
http://rapidshare.com/files/18878892/UK_11200_131_11210_ship.exe
Click to expand...
Click to collapse
Hi teguhokta, ive downloaded the file successfully and will try it later! Many thanks!
success downgrade
Hi teguhokta, i forgot to tell you that your download link works and so as the ROM. Many thanks.
Error 150
I downloaded the ROM from teguhokta and used MaUpgradeUt_noID.exe, but I always get this error message:
(Currentently usind HTCMAG_ROM_WWE_O1)
header2k said:
I downloaded the ROM from teguhokta and used MaUpgradeUt_noID.exe, but I always get this error message:
(Currentently usind HTCMAG_ROM_WWE_O1)
Click to expand...
Click to collapse
Please note that you can extract the .exe and be sure that you wont use the included ROMUpgradeUt.exe. Use MaUpgradeUt_noID.exe instead. You can get it from here http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade.
Hello,
I have juz download the NBH file for WinMo6.5 for Touch Viva.. can any one tell me extactly how to install this stuff...i googled a lot...but din't get any straight info...i only have the 28002_ruu_signed.nbh file.
Thank You.
Welcome aboard
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Opal
you´ll find all you need.
Good luck,
Thank you
thank you...let me check..today on leave...so got enuf time to upgrade my Viva
no luck
nop man...i found nothing there about how to install an .NBH file...it juz gives the product spec and diferent ways for resetting the device.. wht i am looking for is a step by step info on how to upgrade my ROM using this RUU.NBH file...any help??
Have a look here:
http://forum.xda-developers.com/showthread.php?t=441870
And then here:
http://forum.xda-developers.com/forumdisplay.php?f=444
Hope it helps,
Thank you again
i have download the CustomRUU tool..thanks...one more question..the tool shows tht my existing version is 1.35.xxx and the image version to that i have downloaded is 1.27.xxx..
is tht a problem..i am having WinMo 6.1 Pro on my device..and this downloaded image file is WinMo 6.5.
error
n now i got an ERROR 270..says the image is corrupted...i tried download 3 times...nething like the device is locked or somthing...whn i turn on my device..its show ONBL, SPL and OS version 1.35.0000
did you Hard-SPL your Opal before flashing with custom roms?
http://forum.xda-developers.com/showthread.php?t=446446
still confused
hello,
thanx for your support. But can u give me a brief about the flashing processes..i mean the SPL and hardspl and bried step by step info..plz..
Thank You
Razeen Abdulla
flashing is quite easy, after connecting via ActiveSync... double click ROMUpdateUtility.exe and follow the on-screen directions... that's it.
if you want custom roms, you have to Hard-SPL your device first. you won't be able to flash your device with custom roms (cooked) if it's not Hard-SPLed but you can flash it with NON-custom roms (roms that are downloadable from HTC websites).