need your help guys, i cant open nor read my messages coz it yields an error message that says, "Cannot open 'tmail'. A critical component is either missing or cannot start because program memory is unavailable. Tap Start > Settings > System tab > Memory, stop programs that did not automatically stop, and try again. Afterwhich, all links to some progrmas cannot be open.
already conducted 2 hard resets, upgraded my rom and restored my previous backups but to no avail.
Rom is 1.11 WWE
Related
Hi Folks,
first thanks for the new rom. Here my experiences/questions.
First of all, the installation went quite smooth.
I am experiencing the following problems:
1) when starting the device I get the message the file screenrotate.exe cannot be opended. Ehter it is not signed with a trusted certificate or one of its components cannot be found. Same for sms_alert_fix.exe
2) phone link at the left bottom of the screen results in Shortcut Target Error opening the shortcut or locating the target filename
3) active sync with sbs2003 exchange and own certification authority results in The security certificate on the server is invalid. Contact you exchange server administrator or isp to install a valid vertificate on the server Support code: 0x0072F0D. I have downloaded the CA certificate as a file certnew.cer, copied it over to WM2005 and installed it. It is availiable under settings - certificates - root
4) Start - programs is has corrupted programs IA Album, IA Camera, xBackup
Any ideas how to work on these problems?
Tnx
What is the exactly name of the rom file you have downloaded to flash your device ?
XDA2_WM2k5_1.70a.96.WWE.zip ??? if this , it is a corrupted rom ...
try to flash http://tofclock33.free.fr/rom/Wm2k5_170.zip
Downloaded your link and still the same.....
OK, my mistake.
Did not read the installation instruction up to the end.
after modifying the boot options it appears that point 1,2 and 4 are solved.
But there is still the active sync problem.
OK, my mistake.
Did not read the installation instruction up to the end.
after modifying the book options it appears that pint 1,2 and 4 are solved.
But there is still the active sync problem.
Changed HKLM\Security\Policies\Policies\00001017 from 128 to 144
My Domain runs its own CA. So I went to
http://<certserver>/certsrv and downloaded "Download CA certificate", copied it over to XDA and doubleclicked on it.
I can see it now in the certificates
If I manually go to OWA using internet explorer I receive the message "The certificate was issued by a company you have not chosen to trust"
How can I trust it?
XDA2_WM2k5_1.70a.96.WWE.zip ??? if this , it is a corrupted rom ...
I have used the above file from day 1 and it was not corrupt!!!
OK, sorted out my last issue as well.
Besides installing the CA-Certificate I needed to install the Server Certificate as well.
This could be done by opening MMC, adding the Certificates snapin for local machine and exporting under personal certificates the servers certificate.
Copy the export to MMC and doubleclick on it. That's it.
i installed the wm2k5_170.zip
but have problems..
when trying to install any program..
most of the programs needs to be installed to local, but it seems i have 6 mb memory after installing the rom..
i have 32 mb storage memory and 1gb sdram.. but for example pocket plus wants to install itself to device memory.. and when trys to install it says that i dont have enough space..
A slightly strange ugrade problem
TofClock - thanks for the 1.65 and 1.70 upgrades. I've had a weird problem that's stopped me performing the upgrade. I thought I'd ask if it's something specific to your upgrades or some other problem:
I've got Buzz's 1.60c.00 with his 96Mb RAM disk on my Humalaya and it works like a charm. However, when I tried the 1.65 and 1.70 upgrades HimaUpgradeUt.exe failed both times with Error 101 - connection error. But my Himalaya IS securely in its cradle and seems to be communicating properly with the PC: ActiveSync, for example, seems to work perfectly.
The cradle is connected directly to a USB port on my PC and not through a hub, so I'm at a loss what's causing the problem.
Has anyone else had the same experience?
I have got
rom version: 2.06.00WWE
Rom date: 06/14/04
radio version: 1.18.00
protocol version: 1337.38
extended ROM version: xda2jopjo.v3.2zs
When upgraded to xda2jopjo.v3.2zs I had no problems. When I loaded xda2jopjo.v3.2zs it did tell me the all the information under "your Pocket PC software is about update from:", and then it loaded properly. However, with every version of 2005 it gives me none of the information on what I am updating from, and the only information he gives me I'm updating to is "ce image version: 1.70a.96.
And when I click on the upgrade button anyway it does try to upgrade, there is even some activity on the xda, but every time after about 10 minutes it tells me "the current software is now being erased from your PC", it tries a little longer and then tells me "there has been a problem while updating your pocket PC software. To continue the update please:
1 disconnect your Pocket PC and the USB cradle.
2 preform a normal reset by pressing the reset button as picture left show.
3 reconnect your Pocket PC and the USB cradle and run this pocket PC software update program again.
I've tried this several times, but it hasn't worked.
Can anybody help?
fk
When I try to uninstall any software from my jamin (prophet) i get the following message: "this program was not completely removed. do u want to remove it from the list of installed programs."
And in fact the program is not removed at all and I have to delete the files manually, then go to the registry etc...
If i try to uninstall from activesync on the pc, the uninstall windows will simply shut, and uninstall would not proceed.
On the "first days" of my jamin this odd behavior never happened.
Any clue about this?
Thanks all
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
levenum said:
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
Click to expand...
Click to collapse
Thanks for ur reply. But it is not due to either of the 2 causes u mention...
Same happening to me and it's driving me crazy!
please someone help!
You're problems may not be from device side but from software side...
I also had this problem as a developer when i used releases for 2003 devices on 2005 devices (they work well no doubt about it but the message error ocures constantly). The main problem comes with softwares that have a customised setup.
Cheers,
Raul
xusso said:
Same happening to me and it's driving me crazy!
please someone help!
Click to expand...
Click to collapse
Whenever I have had this a soft reset normally solves it.
In other words when you see the error message "not successfully uninstalled do you want to remove the files in the installed list" answer NO then soft reset and try again.
BTW if the program has a today plugin - this should be unchecked before doing the soft reset.
Matt
his has hapened to me also with my Qtek S200 WWE.
But if I soft reset my device and once it boot's up (after quite some time Evil or Very Mad ) I unistall whatever I need to uninstall, then it works just fine.
I have also noticed that by using "Freeup Ram" (part of SKTools) then I'm able to unistall without problems.
Best regards,
Rayan
Hi all,
I have an issue on a nearly magic (TIM 32a).
Each time I run the music or gallery application the following message appears:
"Sorry! The process android.process.media has stopped unexpectedly. Please try again".
I have to click on "Force close" to relaunch them.but same issue.
I reseted the phone: same issue.
I reflash the rom cm4.2.14.1:same issue
Any idea?
Thx 4 UR help.
radio:3.22.20.17 spl:1.33.2010
recovery :Ra-sapphire-1.5.2
rom:cm4.2.14.1
i have searched on internet to find the reason for this mistake.
some people said this is Android Socket unusual.
After running the program pop-up "The application *** has stopped unexpectedly. Please try again" then will have to pray to Force close.
This is a classic mistake . socket is unable to be external connection.The specific error will not be reported out of.When debugging,it can be seen exception.As long as there is network connectivity, they come forward so that you can not run the program.
so wht we need to do is :in the AndroidManifest.xml, we need to make the following configuration
In the following permission of the third page, select "Add ..." select "uses permission", and in right side of name ,choose “android.permission.INTERNET” ,then <uses-permission android:name="android.permission.INTERNET" /> will appear in the AndroidManifest.xml. after it ,runing the application again . this problem will be solved.
but i don not know how to find AndroidManifest.xml. can anyone help me???
Have you do a wipe your data before you flash the new cm rom?
simon1234567 said:
Hi all,
I have an issue on a nearly magic (TIM 32a).
Each time I run the music or gallery application the following message appears:
"Sorry! The process android.process.media has stopped unexpectedly. Please try again".
Click to expand...
Click to collapse
This really doesn't belong in here. You should be posting this in the general forum.
That said, plug the usb cable in, run adb lolcat, and see if you can provide a more descriptive error message when media/gallery crashes. usually the lolcat will give you a more useful idea of why its failing.
apacheo said:
This really doesn't belong in here. You should be posting this in the general forum.
That said, plug the usb cable in, run adb lolcat, and see if you can provide a more descriptive error message when media/gallery crashes. usually the lolcat will give you a more useful idea of why its failing.
Click to expand...
Click to collapse
thx 4 ur answer. does the adb error cause this problem ？？ when i flash new radio this media problem will be solved while other application have same issues. how can i completely solve this problem ？？？ thx again.
Hello,
as the Title says, I have a problem with the Adroid Rever Tethering Tool 3.8.
My Device is selected, my (working) DNS too. But when I hit the Connect button 2 differnt things happen.
First try: the progress stops at the point:
Open connection to android
-> takes 25 seconds
-> nothing happends
I close, restart the program and hit again the Connect button at the second try, that happends:
Everything goes fine and very fast (about 3 secs.) but at the point Run script an error occures
-> Run script
-> Script error.
-> Unable to connect
I close, restart, connect and the first error occures.
I close, restart, connect and the second error occures.
I close, restart, connect and the first error occures.
etc etc etc
I restarted both devices many times. What shall I do now?
I had to install all .apks by myself. the program didn't do anything.
When I search in the internet, I didn't find a question similiar to mine
My phone is an Huawei Y300, rooted, Caynogenmod 11 is installed
In the "tools"-tab of the program it let me choose the path to the ADB.exe. When I change it from ADB.exe to the true path (C:\Users\myname\Downloads\ReverseTethering_V3.8_andromint(1)\ReverseTethering_V3.8_andromint\adb.exe) the program doesn't detect my smartphone then :S, so i rest the path with ADB.exe
Sorry for gramatically or ortographic mistakes; english isn't my mother-language
So thanks for reading and pls help me if you had this problem too and solved it.
I'm open for tips and questions
your,
TheSlashed
Hello, everyone. I have installed but it simply fails to launch. I have searched my options on various sources. I was running Windows 10 and now 11. Same case in both.
Fixes I have already tried:
Added disable.android.first.run=true in the idea file
Did a clean installation
Installed the latest version of Java
Did all of the above again as Admin just in case
Set the JAVA_HOME and JAVA_JRE and cmd %echo% came back with the correct path
There is one thing I noticed. When deleting the Google folder in my Roaming the program runs again but once I pick "Do not import settings" then the program creates this folder but pops the error.
I would post the error message but the error window comes blank.
Thank you in advance for any and all help!