Related
My touch pro crashed before I can backup it. It cannot enter windows interface.
I just wondering how can I back sms from it now?
I am trying to use mtty, but each time when I enter r2sd it show me command error!!!
what can I do.
first of all, you're posting in the wrong section.
second of all, we need more information. ROM? what happened to make it crash? what DO you see if you can't get to windows interface?
fatpandas said:
first of all, you're posting in the wrong section.
second of all, we need more information. ROM? what happened to make it crash? what DO you see if you can't get to windows interface?
Click to expand...
Click to collapse
The rom in my phone is the original rom from three(australia).
I change an ini file of my input method I installed( and set it as the default input method), and this input method has a short cut in startup file in windows. so I guess my phone crashed because it can not load that ini file.
I can see start menu and even the time is correct, but not all hard button is working and the today screen is crashed. beside I can't start any software on my phone and it can not connect to ActiveSync.
I post it here because I think it related to rom dumpping.
I am trying mtty now, but it show "command error!!!" when I try to use "rtask a", "rtask b" or "r2sd".
I think if I can get to the AT commond interface I can dump my sms out
Moved as not ROM Development.
hi.
I'v got loox n560 that was upgraded to WM6.1-6.5 servel times without any problem.
the last time i did update, i did it accidentally with a bad firmware file(uncompleted download).since then, the device wont boot(just a white screen).and the pc wont recognize it.
any way to save it? or i made myself a nice paper weight?
thanks.
I think there was a way to put the N560 in bootloader mode by pushing some keys and soft-reset hole manually (the "monkey grip" it was called or something similar...) and with the file of the rom to be flashed in a SD card... perhaps you can google for information on this ancient -and more unsure that the cable one- flashing mode. Worth to try it better than have a paperweight...
Good luck!
I give you more information (shame that FIRSTLOOX information is not there anymore)
For manual bootloader mode: press On-Off button + left side button (voice recording) + stylus soft reset (for some seconds). Keep pressed On-Off and recording untill the dolphins appear.
I can't find references to flash from SD card. Anyway, for incomplete flashing, Newplowe gives this procedure:
"You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA."
I got this reference from "http://forum.xda-developers.com/showthread.php?t=429148&highlight=flash+n560+card".
Good luck anyway.
this is very interesting...
i was able to put the device into boot loader mode and ran the command "L c:\os_213u.nbf" ("l" didnt work, but L did).
it did something to the device, a progress bar till the end of the screen.but the device didnt reboot.when i try to run POCKETFLASH program it couldnt connect to the device.
i runing windows 7, so i guess it the problem(ACTIVE SYNC is a XP PROGRAM).
i'll try installing XP on another computer and try this again.
thansks.
almost...
i have installed Windows XP just for this, and everything seems to go well, i connect with MTTY, put the l c:\os_213u.nbf command and the device respond.
the next stage i to flash with PocketLOOXN560FlashTool.
when i start it, i receive connection error, and then i go to recovery mode.the program try to communicate with the device, but i get at the end error that the ROM language is different than the language on the device.it says "(ENGLISH)" and there are also empty
()
Click to expand...
Click to collapse
at the end.
i doubled checked this with the original WM5 English rom, and its the same.
is there a way to change the language with MTTY?
any other ideas? its a shame to stop now after i can get a response from the device...
thanks.
The only idea I have is to check if after the failed flashing your N560 is still an "english" one. Perhaps the defective rom has changed the language of your device to something else...
If your device respond to communication with the XP computer, perhaps you could make a rom dump (in newplowe's page you can got tools for doing that) and check in the dump file with an hex editor which language actually has. You can always check newplowe's blog and forum (with google translator ), or ask him
Sorry i didnt post an update.
i have fixed the rom language.it had a gibberish mark at the end of the ENGLISH, after i have fixed that, .the device was flashed correctly and its working!
thanks for thelp guys
hi , AS ABOVE.
i've tried to read all the possible solution and tried it out already
change the host file , try changing the regedit method , tried using device manager to troubleshoot the device driver.
it just cant work. im doing the correct steps . i even flash wp7 again to double confirm my steps.
i have my key already , im just lacking this step to proceed further.
help ? :/
HELP ??
The instructions you can find here are all pretty clear and they work.
I went according to this one:
1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;
You are probably just missing a step
you must be doing something wrong ..cause as i just stated above all the tool and unlocker still works as it did 3 months ago...check some of tutorials in the forum...
http://forum.xda-developers.com/showthread.php?t=916497
hi there , it still doesn't work.
install
1. Install WP7 sdk Windows Phone Developer Tools;
just installing the software only right ?
lionhart1001987 said:
hi there , it still doesn't work.
install
1. Install WP7 sdk Windows Phone Developer Tools;
just installing the software only right ?
Click to expand...
Click to collapse
hi , i connected my phone using wpconnect , im still having same problem
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
I cant remember where I read this but it helped.After completing the above instructions,Open task manager(Ctrl ,Alt &del).Go to processes ,select zune launcher and click on end process.reboot pc ,connect phone , wait for it to sync wit zune ,if it doesnt ,run zune then run chevron and you are done.I did this for 3 phones and it worked.hope this helps.good luck.
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
jasontac said:
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
Click to expand...
Click to collapse
hi , im sure ive done all the steps above .
like i mention , im not those ask before looking through thread.
yes it was not guest r/s with phone - zune .
i sync first before doing it and the r/s was not in guest.
regedit.exe was use to change the registry key before all. any other alternative ?
what kind of machine and os are you using?
jasontac said:
what kind of machine and os are you using?
Click to expand...
Click to collapse
window vista 32bit enterprise and home edition
jasontac said:
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
Click to expand...
Click to collapse
how do you ensure that it is not GUEST?
i seem to be unable to get it to sync with ZUNE
Wow... you can come and work on our helpdesk any time, they log calls about as badly as you explain a problem lol.
You've said it's "not working". Why isn't it working? Where are you getting up to? Are you getting an error message?
Have you deleted all entries of Developerservices... from your host file?
make sure you have corrected date and time
and if possible use SIM Card with "big operator" in your country (well known operator)
sorry for bad english, using google translate
Host File?
pkoper said:
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
Click to expand...
Click to collapse
What Do I Do In This Case?
I gave up with it am not thick had my previous Android phone with root and was loading new roms on daily but just won't work with this get the same thing over and over,
Sorry I'm having trouble communicating etc etc.
Please make sure its connected using USB ( yes it is)
Please start the Zune application ( its open and running)
No matter what I try resetting phone it would never work so thought bugger it what a load of crap, currently on the look out for a nice Android phone had my fill of this.
had sam problem, went and deleted
xx.xx.xx.xx developerservices.windowsphone.com
from host file, and now it works aging.
pkoper said:
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
Click to expand...
Click to collapse
it does on mine... w7 ultimate... dont have to delete anything
Try to reset your phone. It worked for me.
Hi all you wizards,
I had this now brick rooted and jiggling around it with uninstalling some preinstalled apps, but when I attempted to replace some fonts which was my main goal, it turned out that it was not really rooted!!! probably the rooting method and app was malicious. Then none of the apps could fully root it. Z4root followed by Superoneclick and Universalandroot have been tried, no chance but slow and unstable device. finally I decided to master reset. After this, a strange virus like fake warning sticks to the screen saying the battery cover is open and asking to restart! when I really open the cover another warning comes up that battery cover removed. phone is working in background. It responds to USB connection, even detects an update of ROM I copied to solve the problem but no chance.
Has anybody any idea to get it back to life by using PC as there is no direct interactions with the phone coz of the virus?
basically I prefer to get rid of the virus through SDK and ADB if possible although I am a mushroom and Dono how.
Is it possible to wipe off some infected data or I have to wash out all the ROM and install a new one?
I have another phone handy exactly the same thing, should I copy all data from other one to this one or the update version of original ROM would work?
it is Garmin Asus A50 nuvifone with built in full GPS and navigator; 256 ROM, 256 RAM, 600 MHtz CPU, ARMv6, android 2.1 update 1
Thanks so much in advance for any participation even your experiences without useful result
here is some more information about the matter;
I needed to install some fonts for other languages which are not supported by android
So I tried to use information and files to get my device rooted and replace some fonts in system/fonts directory and some files in system/lib directory to use other languages in my android.
1- I started with Z4root , I downloaded through device and installed it, and I uninstalled my antivirus as it always said it is not safe, so I activated USB debugging and then permanent root and I had the super user. I installed some apps and used them to uninstall some preinstalled app and similar issues. When I tried to replace fonts and files, my file explorer with root ability, it said I don’t have enough authorization or something to access the file, I tried more root file explorer but same result, even a root checker said my device is not rooted!
2- Then I tried UniversalAndroot-1.6.2-beta5. Again I downloaded it through my device browser but it could not help as it said fails! I thought it is because of Z4root so I uninstalled Z4root but failed to root again.
3- I wanted to use pc method and root my phone by PC, even though this method was for android ginger bread and not my brand but as much as tried, my device did not show a recovery mode in start up by pressing power button and volume key but when I pressed middle key of arrow keys went to safe mode. so I ignored it.
4- Finally I downloaded the oneclick app through my device from the net. It was a zip file with so many files and super user, I just installed superuser but not helpful to replace font, then uninstalled.
5- Again installed Z4root but my phone was freezing and unstable so decided to master reset to factory setting. I did it once but after reset, nothing changed so I did it again. This time a warning sticks on the screen says;
” close the battery cover, and restart the device to complete first time set up.”
and asks for restart.
There should be something wrong as when I really open the battery cover, another warning comes up and says; battery cover removed!
Phone is working in background, even I copied a factory update of my ROM and its been detected but the crazy warning does not let to do anything but restart!
Now I need help to show me how I can use my PC to reset my device as upon a usb connection it asks for interaction and lets me to work via usb cable, and then how I can go to recovery mode in start up?
Otherwise it is a brick, lol
it does not let me to do any interaction cause of the crazy warning. it asks for restart, thats all I can do, or other warnings like asking to do update or usb connection option or battery cover removed, but no more. it means I can not activate usb debugging if needed or follow update process through mobile UI. besides in this kind of phone there is no recovery mode but just something like "USB polling mode" and "safe mode." the warning is in safe mode too and I dono how to use "USB polling mode".
however the only option is ADB, and I do not have an backup of the rom but another simillar phone to make copy or the update file, if possible to copy them via ADB which I am dono how; like which commands and where to copy them?
honestonline said:
it does not let me to do any interaction cause of the crazy warning. it asks for restart, thats all I can do, or other warnings like asking to do update or usb connection option or battery cover removed, but no more. it means I can not activate usb debugging if needed or follow update process through mobile UI. besides in this kind of phone there is no recovery mode but just something like "USB polling mode" and "safe mode." the warning is in safe mode too and I dono how to use "USB polling mode".
however the only option is ADB, and I do not have an backup of the rom but another simillar phone to make copy or the update file, if possible to copy them via ADB which I am dono how; like which commands and where to copy them?
Click to expand...
Click to collapse
same situation, no solution ???
ogabic said:
same situation, no solution ???
Click to expand...
Click to collapse
solution for this?
http://kazzi.net/tips-tricks/revive...r-deadly-close-the-battery-cover-message.html
found this but dont know how to adb .
but for sure on giving a missed call and following the idea in link u can use the phone but annoying error wont go away
I have the same problem but I cannot receive calls
Hello
A couple days ago I got a Garminfone from a friend, I use it mostly as a GPS only, because T-Mobile does not have any coverage in my country and I don't have the unlock code.
Yesterday I wanted to make a hard reset to start over, holding the D-pad left while powering on the phone, **WIPE USERDATA** appeared on the screen.
Everything was fine until it restarted, after the restart it showed the following warning: "Close the battery cover, and restart the device to complete first-time setup", the battery cover is closed and it does not let me do anything, the official ROM update does not install and If I do another hard reset the error persist and the phone does not make or receive calls.
Before this issue I got it rooted using z4root
Is it there anyway to update the device without using the update launcher from the phone?, or reinstall the 2.1 update using the usb cable via command prompt or any tool?.
I just want to get rid of this error and keep using the device as a regular GPS
Anyone can help?
I really appreciate any help you can provide.
So I have a Samsung Focus running Mango 7712. I had no issues updating to that, no 'walshed' phone or whatever it's called. I have been trying and looking for solutions for 3 days now on how to update to Mango 7720 but I'm stuck now and nothing seems to work, so I'm hoping someone can shed some light on this.
I have:
1. All the proper drivers installed I'm pretty sure
2. Zune 4.08.2134
3. The 7720.rar and everything extracted directly and properly to the C: drive. I even uninstalled the update tool I had and installed the one that was located in the 7720.rar folder.
So here's my issue:
When I go to run the .bat file as an administrator, everything starts fine, transfers the updates, perfect...except when it gets to "restarting phone". That's when the problem occurs. I feel like it hangs on the 'Goodbye' screen too long, and THEN the command prompt just quits...a few seconds later the phone finally restarts and is stuck on the screen that says to plug it into the computer. So I have to pull battery and restart...obviously with 7712 still on there
I have tried to clear up more space on the phone ( I have 8.0GB free), I have tried unplugging and plugging the USB back in, just trying to restart the .bat file while it's stuck on that screen (to no avail), and I have tried 'pausing' the process in the command prompt until the phone gets back up to the connect to PC screen- but then when I resume the command...it just auto closes.
PLEASE someone help...I'm tired and can't find any solutions
Thanks to any replies in advance.....
I had the same issue. Instead of right-click, Run As Admin, try running the .bat by double-clicking. It still took quite a while for my Focus to reboot, but it finally restarted before the tool timed out.
Also, make absolutely sure all folders are in the C:\ drive. When I first extracted 7720.rar to the C:\ drive, it actually put everything into C:\MANGO. So I had to move it all to C:\ before anything would work.
Hope that helps.
GAlonzo said:
I had the same issue. Instead of right-click, Run As Admin, try running the .bat by double-clicking. It still took quite a while for my Focus to reboot, but it finally restarted before the tool timed out.
Also, make absolutely sure all folders are in the C:\ drive. When I first extracted 7720.rar to the C:\ drive, it actually put everything into C:\MANGO. So I had to move it all to C:\ before anything would work.
Hope that helps.
Click to expand...
Click to collapse
sigh....thanks for the idea but it didnt help still nothing
maybe this can help
ISVTo7720.bat Hangs on restarting phase/Error 801812c1 after run
This was the most common Error listed and had many solutions which seemed to work sporadically.
1. Do what @DavePerman said, and use the pause command so freeze the cmd command until phone reaches flashing phase.
2. Execute ISVTo7720.bat in a standalone CMD instead of through Windows Explorer. Do this by Run(open as Admin)>cmd>cd Mango>cd RCToRTM>ISVTo7720.bat
3. Remove all music from the device to free up 6+ gigs of memory.
4. Have at least 12 gigs of hard drive space on your computer. Some clam they needed 20
5. press the off button on the phone to force the phone into its flashing screen. (some say they pressed the button, some say they held it down until the screen turned off)
5. The most extreme, and last resort for this problem is to reset your phone through its settings menu. You will lose all information on the phone. (remember your contacts and apps are all in the cloud, so they can be recovered. Music/pictures/videos can be re-synced if backed up before hand.)
nothing seems to work
zune is not running while ur doing this is it ?
make sure zune is not running also try uninstall and reinstall the phone drivers...
bigtime1 said:
zune is not running while ur doing this is it ?
Click to expand...
Click to collapse
No I even killed off all processes with zune in them
also try uninstall and reinstall the phone drivers...
yea I did that, but I'm pretty certain its not the drivers since the phone rebooted, it just hangs...
did u install the windows phone developers tools 7.1
bigtime1 said:
did u install the windows phone developers tools 7.1
Click to expand...
Click to collapse
Yup I have them installed