Related
Hi,
Help needed to restore GSMFSS.NB0 cause flash stops with message,
"GSMFSS at 0x13000000
GSM Doesn't exist
Spin Forever
Use (format All) instead."
Is there a way to format all rom?
Thanx
If you have an original RUU (from either manufacturer or vendor), you could try that and see if you can flash an official rom. First thing would be if you can get into bootloader. If you can't, then I am afraid that you got yourself a pretty expensive paperweight.
However, if you can get into bootloader, there is still hope...
I am sorry but I cannot guide you through the bootloader process for your phone, but I do not own that device. However, this seems to be a way to possibly recover most phones I have seen so far.
Well if press "volume down+Left OK+Reset" i go into this main menu option, with Xand, Nand Format, diagostic,etc but when i press the respective key it does nothing... the GSMFFS error appears when i try to flash from the original RUU. So the device is comunicating, and i can access IPL- insert usb cable...
Can i access the device with rom with P525 Kitchen Tool?
Thnx
santosru said:
Well if press "volume down+Left OK+Reset" i go into this main menu option, with Xand, Nand Format, diagostic,etc but when i press the respective key it does nothing... the GSMFFS error appears when i try to flash from the original RUU. So the device is comunicating, and i can access IPL- insert usb cable...
Can i access the device with rom with P525 Kitchen Tool?
Thnx
Click to expand...
Click to collapse
Well, that is fairly good news... you can apparently access bootloader, so not all hope is lost. As far as the P525 kitchen, you always have to be extremely careful when using a program that was designed to work with a different device from yours.
Have you tried using the RUU after getting the device in bootloader mode? In other words, get it to this status, connect the USB cable to the computer (establish a connection), and then try to use the RUU. It could be that the GSMFFS error could be from the RUU not being able to put the device into bootloader.... It might just work... Good luck!
I got this out of an Asus Russian forum
"Proshivatsya in expert mode, though, and so like to ask
But if you do not return startanet through the expert mode
Hold down, press and hold OK (side button), tyknut stylus reset.
Wait for the appearance of the caption "IPL: Insert USB CABLE"
On the PC run P527FUU.exe, in the back left corner click on the program icon, choose the Expert Mode
Connect the cable and click Update
Do not guarantee the accuracy of keystrokes, but in the manual for the R527 is written that way. "
Here is the link for the site (already google translated)
http://translate.google.com/transla...earch?q=GSMFFS&hl=en&rlz=1C1GGLS_enUS310US310
Browse through some of the posts and see if you can come up with something. From what I have read the "Format All" is accomplished only via "Expert Mode" described above. If you can access that, then you might have a chance to restore the device.
egzthunder1 said:
Have you tried using the RUU after getting the device in bootloader mode? In other words, get it to this status, connect the USB cable to the computer (establish a connection), and then try to use the RUU.
Click to expand...
Click to collapse
Yup, the error appears just 5sec after pressing update button...
I guess the problem resides on the fact that gsmffs.nb0 file is missing from the rom, cause RUU log shows:
ClientDriver.dll Attach
g_Driver=0 g_RTimeout=0 g_WTimeout=0 g_DebugON=0 g_PurgeTx=0 g_PurgeRx=0 g_WaitRx=0 g_splitReadAck=0 g_splitReadAckSize=0
Client_QueueJob(): FeatureID=3, FileName=temp3, HeaderLen=0
Client_QueueJob(): Assumed flashing a Asset Data File because there is no header
Client_QueueJob(): FeatureID=3, FileName=temp2, HeaderLen=0
Client_QueueJob(): Assumed flashing a Asset Data File because there is no header
Client_QueueJob(): FeatureID=17, FileName=temp4, HeaderLen=0
Client_QueueJob(): Assumed flashing a Asset Data File because there is no header
Client_Initialize(): Model=(null), Language=0
Client_Initialize(): Skipping the model verification check
Client_Initialize(): Skipping the language check
Client_Initialize(): rebooting device...
Client_FormatDiskEx(): Type=3 Backup=c:\gsmffs.nb0
OpenComPort(): Wceusbsh
GetWceusbshDevicePreset
OpenComPort(): Wceusbsh \\?\usb#vid_045e&pid_00ce#5&1e9a0cb1&0&1#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
Windows Closing end
OpenComPort(): PC is XP plus
OpenComPort(): PC is XP plus
OpenComPort(): cto.RIT=0 cto.RTM=0 cto.RTC=0
OpenComPort(): cto.WTM=0 cto.WTC=0
OpenComPort(): sucessful
SendFormatDisk() cmd=3
GetEachROMSize(): GSM size=5242880
GetEachROMSize(): OS size=70254592
GetEachROMSize(): EXTROM size=1048576
SendFormatDisk():USBWritePacket
SendFormatDisk(): USBReadPacket
...
And then it hangs on the last command, it should return
SendFormatDisk(): receive format ok
ReadBackup(): Get a packet Remain=65536
...
I assume C:\ is on the pda not my computer right? I guess this file is missing. Very frustating since there's no tools available for my P527...
Look for a Rom dump from this device and see if you can find the missing file.
I think that the C:\ is actually in the computer. Even if the PDA is recognized as external storage, it would probably take a different letter (unless your HDD has a different letter assigned to it). But in bootloader mode, it is not recognized as storage.
Also, look for another RUU (for this device) and see if it works. Good luck
same problem
santosru said:
Well if press "volume down+Left OK+Reset" i go into this main menu option, with Xand, Nand Format, diagostic,etc but when i press the respective key it does nothing... the GSMFFS error appears when i try to flash from the original RUU. So the device is comunicating, and i can access IPL- insert usb cable...
Can i access the device with rom with P525 Kitchen Tool?
Thnx
Click to expand...
Click to collapse
hi santosru,
i am also having same problem were you able to solve it? where you able to select the options?
Ok, this may not work for everyone but it worked for me. I CAN NOT take credit for any of the work. I can how ever offer a very sincere thank you to developers who have brought 6.5 to the P527.
Download SCHIST 21864 from http://forum.xda-developers.com/showthread.php?t=506417
use the P527FUU that is included and check both OS and GSM.
set the OS path to ????/SCHIST_21864_clean\flash.dio.nb0
set the GSM path to ????/SCHIST_21864\EXT GSM(IND)\GSM.dio.nb0
now you need your phone screen to show the IPL: USB Cable message.
turn key lock on, press in on the scroll wheel (left side of phone), press and release the soft reset button with stylus, release the scroll wheel and press the left OK button. it may take a times to get it right but you should get the IPL: screen up. (I actually have to release the scroll wheel then move it down, release and then press the OK button)
insert the usb cable, click the ???? button in P527FUU this should "fix" you.
after it's complete even if phone hangs at the blue Asus screen you can download the correct Asus flash and use the installed included from Asus in advanced mode to restore your phone to WM 6.1 for your area.
if this helps anyone let me know.
IMPORTANT: I just learned that the computer you flash with has something to do with the bad flash. I needed to reflash the original 6.1 back to my phone and it locked up again on my computer, I tried my girl friends and it worked fine using the above steps.
i have a problem. my omnia i900 has not working touchscreen and i want to use the second option to control-use my phone with trackpad/mouse but because my touchscreen is not working at all i must change settings to use trackpad instead of touchscreen by remote control(activesync) through computer. how can i do this, can anyone help me.
Install MyMobiler in you pc. It'll allow you to use your PC to control the connected phone.
mymobiler doesnt work for me because when i start my mobiler on computer the phone wants me to accept remote acces and because the touchscreen is not working i cannot accept it. i want to know exactly what program to use AND EXACTLY what to do to change settings on the phone(which file to change or overwrite and with what file to overwrite on phone windows through my computer)
TOUCHSCREEN IS NOT VALID SO I CANT CLICK ON YES OR NO(accept or deny) IN ANY CASE
please write me the exact process
Hey watch the freakin' caps n bold! I'm trying to help here.
Can you access any app? With a simple registry change you can use the trackpad like a mouse pointer... Set the "HKLM\System\State\Samsung\Mouse\ActionMethod" value to "3001" (without quotes).
Else you could do it with Mortscript (do you have it installed?). Just place the script attached in "Windows\Startup" and reboot your phone.
exactly, i cant install any app to phone, because if I want to install it, the phone will ask me to accept/allow the installation, and because touchscreen is not working I cant click on screen to allow installation so the only way to solve my problem is to change registry(to activate mouse/trackpad instead of touchscreen) by connecting computer and phone using activesync on my computer.
I have no experience with registry changing, I even dont know how to find the registry(hklm) and even dont know how to change it so I need exact instruction, but remember, I dont know where it is(reg) and how to change it. So please write me the exact instruction, step by step. Tnx for sending me mouse.zip file. I will use the file when somebody will ive me instruction how to do it.
I know to connect the phone with computer, I know how to use activesync, but to work with registry i am a rookie.
OR
please tell me the exact instruction with mortscript. is it connected with mouse.zip or is mouse.zip standalone script to repair the problem. I dont know how to use mortscript, I did what u wrote- I copy morthscript into phone windows/startup. at the same point i extracted mouse.zip into windows/startup. so both are in startup folder. please give me a little bit more detailed instrution about this. tnx
You know I just fired up my old i910 and with windows button I was able to enable mouse without touching the screen. Swipe dpad to get to settings navigate and enable.
good day.
I don't think he'll be able to send the "Ok" to the window...
Ok I've adapted it again...
Extract the files from mouse2.zip. Place "fix.lnk" in the startup folder and place the other two files on the root of the device (internal memory... not storage or memory card). Reboot the device.
hi.
I'v got loox n560 that was upgraded to WM6.1-6.5 servel times without any problem.
the last time i did update, i did it accidentally with a bad firmware file(uncompleted download).since then, the device wont boot(just a white screen).and the pc wont recognize it.
any way to save it? or i made myself a nice paper weight?
thanks.
I think there was a way to put the N560 in bootloader mode by pushing some keys and soft-reset hole manually (the "monkey grip" it was called or something similar...) and with the file of the rom to be flashed in a SD card... perhaps you can google for information on this ancient -and more unsure that the cable one- flashing mode. Worth to try it better than have a paperweight...
Good luck!
I give you more information (shame that FIRSTLOOX information is not there anymore)
For manual bootloader mode: press On-Off button + left side button (voice recording) + stylus soft reset (for some seconds). Keep pressed On-Off and recording untill the dolphins appear.
I can't find references to flash from SD card. Anyway, for incomplete flashing, Newplowe gives this procedure:
"You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA."
I got this reference from "http://forum.xda-developers.com/showthread.php?t=429148&highlight=flash+n560+card".
Good luck anyway.
this is very interesting...
i was able to put the device into boot loader mode and ran the command "L c:\os_213u.nbf" ("l" didnt work, but L did).
it did something to the device, a progress bar till the end of the screen.but the device didnt reboot.when i try to run POCKETFLASH program it couldnt connect to the device.
i runing windows 7, so i guess it the problem(ACTIVE SYNC is a XP PROGRAM).
i'll try installing XP on another computer and try this again.
thansks.
almost...
i have installed Windows XP just for this, and everything seems to go well, i connect with MTTY, put the l c:\os_213u.nbf command and the device respond.
the next stage i to flash with PocketLOOXN560FlashTool.
when i start it, i receive connection error, and then i go to recovery mode.the program try to communicate with the device, but i get at the end error that the ROM language is different than the language on the device.it says "(ENGLISH)" and there are also empty
()
Click to expand...
Click to collapse
at the end.
i doubled checked this with the original WM5 English rom, and its the same.
is there a way to change the language with MTTY?
any other ideas? its a shame to stop now after i can get a response from the device...
thanks.
The only idea I have is to check if after the failed flashing your N560 is still an "english" one. Perhaps the defective rom has changed the language of your device to something else...
If your device respond to communication with the XP computer, perhaps you could make a rom dump (in newplowe's page you can got tools for doing that) and check in the dump file with an hex editor which language actually has. You can always check newplowe's blog and forum (with google translator ), or ask him
Sorry i didnt post an update.
i have fixed the rom language.it had a gibberish mark at the end of the ENGLISH, after i have fixed that, .the device was flashed correctly and its working!
thanks for thelp guys
hi , AS ABOVE.
i've tried to read all the possible solution and tried it out already
change the host file , try changing the regedit method , tried using device manager to troubleshoot the device driver.
it just cant work. im doing the correct steps . i even flash wp7 again to double confirm my steps.
i have my key already , im just lacking this step to proceed further.
help ? :/
HELP ??
The instructions you can find here are all pretty clear and they work.
I went according to this one:
1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;1. Install WP7 sdk Windows Phone Developer Tools;
2. Install zune;
3. Make partneship with zune and phone;
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;
6. Connect your phone to pc and make sure zune is running in background;
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)
6. Install toms .xap installer;
7. Deploy Connection Setup.xap, Touch Xplorer.xap and XBMODDeployer.xap (Install it on the phone and run XBMODDeployer.xap);
8. Copy the .provxml from the ringtons folder to the windows folder (on the phone using touch explorer app);
9. Run connection setup to install the .provxml;
You are probably just missing a step
you must be doing something wrong ..cause as i just stated above all the tool and unlocker still works as it did 3 months ago...check some of tutorials in the forum...
http://forum.xda-developers.com/showthread.php?t=916497
hi there , it still doesn't work.
install
1. Install WP7 sdk Windows Phone Developer Tools;
just installing the software only right ?
lionhart1001987 said:
hi there , it still doesn't work.
install
1. Install WP7 sdk Windows Phone Developer Tools;
just installing the software only right ?
Click to expand...
Click to collapse
hi , i connected my phone using wpconnect , im still having same problem
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
I cant remember where I read this but it helped.After completing the above instructions,Open task manager(Ctrl ,Alt &del).Go to processes ,select zune launcher and click on end process.reboot pc ,connect phone , wait for it to sync wit zune ,if it doesnt ,run zune then run chevron and you are done.I did this for 3 phones and it worked.hope this helps.good luck.
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
jasontac said:
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
Click to expand...
Click to collapse
hi , im sure ive done all the steps above .
like i mention , im not those ask before looking through thread.
yes it was not guest r/s with phone - zune .
i sync first before doing it and the r/s was not in guest.
regedit.exe was use to change the registry key before all. any other alternative ?
what kind of machine and os are you using?
jasontac said:
what kind of machine and os are you using?
Click to expand...
Click to collapse
window vista 32bit enterprise and home edition
jasontac said:
another confirmation that the unlocker still works for me without any problems at all...i dont nor havent deleted any host files or changed any setting at all within the machine. I have had one or two problems with it not working, the first problem i ever had when i first started using the unlocker was the registry key not being edited correctly... and for the second time it didnt work, all i did was unplug device and let re sync...tick, tick BOOM unlocked!! Besides those couple times it has always worked for me...Bought a new machine today and installed tools, then zune software and created account " naming phone " and installed chevron, opened and unlocked....if you have sdk tools installed and have the unlocker installed, with zune software completely set up and phone communicating with zune, not as guest...and you will change the relationship from guest to " whatever you name your phone " during setup... haven a complete and main relationship with phone " not guest " is one of the most important parts with zune!!! The other most important part is making sure the registry is edited and should look like this...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
the window phone developer tools will edit reg for you...i have learned that if you relock the phone it sometime can takes a little while for things to click and be able to unlock again!!
So there is nothing wrong with any of the tools or unlocker, so if your having problems tripple check your zune settings to accomplish a non guest relationship, and check your reg. edit.....most problems i have seen and heard about are ppl and their zune!
Click to expand...
Click to collapse
how do you ensure that it is not GUEST?
i seem to be unable to get it to sync with ZUNE
Wow... you can come and work on our helpdesk any time, they log calls about as badly as you explain a problem lol.
You've said it's "not working". Why isn't it working? Where are you getting up to? Are you getting an error message?
Have you deleted all entries of Developerservices... from your host file?
make sure you have corrected date and time
and if possible use SIM Card with "big operator" in your country (well known operator)
sorry for bad english, using google translate
Host File?
pkoper said:
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
Click to expand...
Click to collapse
What Do I Do In This Case?
I gave up with it am not thick had my previous Android phone with root and was loading new roms on daily but just won't work with this get the same thing over and over,
Sorry I'm having trouble communicating etc etc.
Please make sure its connected using USB ( yes it is)
Please start the Zune application ( its open and running)
No matter what I try resetting phone it would never work so thought bugger it what a load of crap, currently on the look out for a nice Android phone had my fill of this.
had sam problem, went and deleted
xx.xx.xx.xx developerservices.windowsphone.com
from host file, and now it works aging.
pkoper said:
Check your hosts file.
If it contains following entry, Chevron will not work:
127.0.0.1 developerservices.windowsphone.com
Click to expand...
Click to collapse
it does on mine... w7 ultimate... dont have to delete anything
Try to reset your phone. It worked for me.
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Update your EFI BIOS
Install Android 4.4.4 (Stock & RemixOS)
Disclamer: This process might contain ROM hacking, this is for advanced users.
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
2 Flash Drives (1Gb or more, and 4Gb or more)
OTG cable
USB Hub (3 Ports recommended)
WinPE for Win10 (Downloadable on my drive)
Win10 32 bits ISO (link in tutorial)
THIS IS THE LINK I'M REFFERING TO WHEN SAYING "THE DRIVE"
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
What to do :
1.) Start by plugging the first usb drive (1Gb or more) into your computer, and format it to FAT32 using any formatting tool,
MAKE SURE YOU CHANGE PARTITION TABLE STYLE TO GPT, EITHER YOU WILL END UP WITH ERROR ON WINPE INSTALL
2.) Now you need to download WinPE from the drive, go to your device folder, then go into the windows folder, and download it.
Once you downloaded it, uncompress. You will find a "WinPE_XX" folder inside, take all of its content, and extract it to your freshly formatted drive.
Heres what looks like the root of your key:
3.) Your USB Install Drive is ready. You can plug it off and save it for later.
You now need to download a 32Bits ISO version of windows, if you already have one, it should work, if you don't, you can download it from Microsoft Website
4.) Now take your downloaded ISO, and mount it with either windows, daemon tools, PowerISO, or any Disk Image Manager.
Once mounted, you need to navigate to the X:\sources\ folder, and extract "Install.wim" anywhere on your PC. Thats the windows system we will install.
5.) Go to the drive, into your device folder, go to windows folder, and download the "Image_Recovery_Extra.zip" you can find there.
It contains recovery + Files mandatory for install (because the Windows PE we're using is hacked from Cube).
6.) Take your second USB Drive (of 4Go minimum, it needs to hold windows), and format it to NTFS Filesystem with any formatting tool.
Now you can extract the "images" folder of the previously "Image_Recovery_Extra.zip" downloaded (KEEP THE IMAGES FOLDER THIS TIME)
And also copy inside that "images" folder your previously extracted Install.wim image file.
7.) You're good to go ! You can unplug the keys from your PC, and start working on the tablet as of now !
You need to boot to BIOS settings, using "ESC" key at startup of tablet. Once there, go to SCU Settings, the bottom right square.
You need to set your primary boot to "Windows" in the boot tab, or the key won't boot. If it is already, you can exit SCU and start step 8.
If it is not, just select it, then press F10. Tablet should reboot. Press ESC again at startup, and start step 8.
8.) Now everything is straightforward: Just select "Boot from EFI File", select your USB key in the list, and go to EFI folder, then go inside BOOT folder, and select "Bootia32.efi"
The tablet should boot to a command prompt (it lags much, but we will install drivers later) and it should install windows automatically then shut down.
If install fails, update your BIOS and try again or post here for some help.
Preparation looks like this:
Working device looks like this:
9.) Now you can get rid of the installation USB keys, you only need mouse and keyboard. Fire up your tablet freshly flashed, it should boot to a chinese logo with a circle under it. it might reboot a few times, it is actually expanding filesystem and populating your win10 install. Wait until you end up in language screen. if it shuts down, put it on again if it does not automatically.
10.) Windows is ready, now follow the instructions, language, set your name, until you end up on the windows desktop. When you are here, you need to download from the drive the Driver Package for windows 10, which is located inside the driver folder, inside the windows folder of your devices folder. It sould be named "Z37XX_CPU_Chipset.zip"
Extract it on the tablet, and run the included "Setup.exe". When finished, reboot your tablet.
you can also find various driver i added for os switch and gyrometer
Congrats! You successfully Installed Windows 10!
I do not guarantee it works on every device, nor with every windows version, but it works in my installation with a regular Win10 x86 Pro.
There might be some upgrades to do, as I personnally hacked the WinPE that is available on Cube's site, with Windows 10 ADK WinPE,
so feel free to report bugs, enhancements to this method. and report cube for not doing this so far !!!
Regards,
Max.
Top! Thank you!
I had exactly the same issue and want to fix it this weekend. My I6 arrived on Thursday. Now I follow your instructions to update to Windows 10.
Hi, glad it is helping! tell me if you are having issues, or if some steps aren't detailed! i'll upload some photos later. if you need something for this tablet feel free to ask
regards
stalker2106 said:
Hi, glad it is helping! tell me if you are having issues, or if some steps aren't detailed! i'll upload some photos later. if you need something for this tablet feel free to ask
regards
Click to expand...
Click to collapse
Hey Max,
now I have the first problem.
On my Windows 10 Image I do not have any install.wim file. There is only a install.esd (about 2GB) file in the \sources\ folder. But this file is not possible to extract with 7zip. The only *.wim file in the directory is the boot.wim. What have I to do?
scharrrfi said:
Hey Max,
now I have the first problem.
On my Windows 10 Image I do not have any install.wim file. There is only a install.esd (about 2GB) file in the \sources\ folder. But this file is not possible to extract with 7zip. The only *.wim file in the directory is the boot.wim. What have I to do?
Click to expand...
Click to collapse
Alright, i don't know what ISO of windows 10 you have, but i found a tutorial on how to convert esd to WIM, so no worries (http://www.intowindows.com/how-to-easily-convert-install-esd-to-install-wim/) furthermore, i would recommend using PowerISO for extracting the file, as i'm not aware of how to extract from ISO with 7zip
Okay, thank you. With this it works
But I have some error when I boot the WinPE on step 8. I get the message: "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f""
On this point the tablet do not recognize any keyboard command.
scharrrfi said:
Okay, thank you. With this it works
But I have some error when I boot the WinPE on step 8. I get the message: "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f""
On this point the tablet do not recognize any keyboard command.
Click to expand...
Click to collapse
What is that \EFI\Microsoft\Boot\BCD you are trying to boot from ?
You should select \EFI\Boot\bootia32.efi. If it does not work make sure your BIOS is at version 206 (its my case, so i guess it can be this) and if not, upgrade it with the provided tutorial, maybe you'll have more luck with that ? You can check its version on android by going to device info in settings and check IFW Version.
EDIT: The WinPE media might be trying to access your hard drive EFI folder to use its BCD configuration, check that too, maybe you can format that EFI partition before booting to winpe ?*
EDIT2: Check BCD integrity maybe, 262 144 bits is what it weights on my side
stalker2106 said:
What is that \EFI\Microsoft\Boot\BCD you are trying to boot from ?
You should select \EFI\Boot\bootia32.efi. If it does not work make sure your BIOS is at version 206 (its my case, so i guess it can be this) and if not, upgrade it with the provided tutorial, maybe you'll have more luck with that ? You can check its version on android by going to device info in settings and check IFW Version.
EDIT: The WinPE media might be trying to access your hard drive EFI folder to use its BCD configuration, check that too, maybe you can format that EFI partition before booting to winpe ?*
EDIT2: Check BCD integrity maybe, 262 144 bits is what it weights on my side
Click to expand...
Click to collapse
I do not know, why it says \EFI\Microsoft\Boot\BCD. I selected the correct .efi-file.
But I think my tab is now gone. I have try the bios update from 203 to your 206. It have flash completed to 100% and turns the tablet off. I wait a few minutes and then I try to turn it on again for another try to install Windows 10. But it will not turn on again. It does also not recognize the charger anymore. I think I brick the i6 with the 206 Bios. What a bother!
scharrrfi said:
I do not know, why it says \EFI\Microsoft\Boot\BCD. I selected the correct .efi-file.
But I think my tab is now gone. I have try the bios update from 203 to your 206. It have flash completed to 100% and turns the tablet off. I wait a few minutes and then I try to turn it on again for another try to install Windows 10. But it will not turn on again. It does also not recognize the charger anymore. I think I brick the i6 with the 206 Bios. What a bother!
Click to expand...
Click to collapse
Ok, if the process went 100%, then there is a high probability it is not bricked.
Remember that still, you can boot using DnX mode holding power and volume +.
What do you mean by "it does not recognize the charger" ? when you plug it, the charging led does not light up ?
Thats very odd. because its not controlled by bios but only hardware derivation I guess.
please keep me tuned in on that !!
Edit: FYI I used the exact same BIOS on my model, which is a i632GB15378650186.
stalker2106 said:
Ok, if the process went 100%, then there is a high probability it is not bricked.
Remember that still, you can boot using DnX mode holding power and volume +.
What do you mean by "it does not recognize the charger" ? when you plug it, the charging led does not light up ?
Thats very odd. because its not controlled by bios but only hardware derivation I guess.
please keep me tuned in on that !!
Edit: FYI I used the exact same BIOS on my model, which is a i632GB15378650186.
Click to expand...
Click to collapse
DnX mode does also not work. And yes i mean, that the LED does not light up at all.
My model is i632GB15224920293. I think it is an older one.
scharrrfi said:
DnX mode does also not work. And yes i mean, that the LED does not light up at all.
My model is i632GB15224920290. I think it is an older one.
Click to expand...
Click to collapse
Wow. You mean there are older model with other BIOS System ?
I'm so unhappy to hear your story. I hope i can help to fix it !
Whatsoever, how can any BIOS accept flashing itself if its not corresponding ?
Good thing you point out there, but c'mon, how can your tablet be bricked if the process went OK...
Maybe you can contact cube about it ? Maybe if you hold power long enough it will turn off ?
Once the tablet did this to me, had to hold power 10s to get it back off !
EDIT: good thing I remember is that i had it shipped with 205 BIOS, so i guess you're right and its an older model you have. Still, I have spare BIOS Firmware 204 that I flashed for testing purposes that also worked flawlessly !
EDIT2: found that there might be tons of differents models like raspberry pi, look this one does not match with any of ours : http://winphonetech.com/wp-content/uploads/2015/08/cube.jpg or maybe it is just a serial number generated from the # produced or the current date of prod ?
stalker2106 said:
Wow. You mean there are older model with other BIOS System ?
I'm so unhappy to hear your story. I hope i can help to fix it !
Whatsoever, how can any BIOS accept flashing itself if its not corresponding ?
Good thing you point out there, but c'mon, how can your tablet be bricked if the process went OK...
Maybe you can contact cube about it ? Maybe if you hold power long enough it will turn off ?
Once the tablet did this to me, had to hold power 10s to get it back off !
EDIT: good thing I remember is that i had it shipped with 205 BIOS, so i guess you're right and its an older model you have. Still, I have spare BIOS Firmware 204 that I flashed for testing purposes that also worked flawlessly !
EDIT2: found that there might be tons of differents models like raspberry pi, look this one does not match with any of ours : http://winphonetech.com/wp-content/uploads/2015/08/cube.jpg or maybe it is just a serial number generated from the # produced or the current date of prod ?
Click to expand...
Click to collapse
Yes, I think you are right, that the last numbers are any kind of a serial number. Do you have another Bios file? On the web I found only the 201. I can try to buy an ISP programmer and reflash the tablet.
And I have tried different buttons combinations on hold in hope that the tablet wake up again. But still nothing
scharrrfi said:
Yes, I think you are right, that the last numbers are any kind of a serial number. Do you have another Bios file? On the web I found only the 201. I can try to buy an ISP programmer and reflash the tablet.
And I have tried different buttons combinations on hold in hope that the tablet wake up again. But still nothing
Click to expand...
Click to collapse
Thats some freaking bad news ...
I uploaded 204 BIOS to the drive... cheers, fingers crossed.
It's a great news that the I6 Air is possible to upgrade to Win10 now. But before taking action, I have one question to clarify. After the upgrading, is the Android system still there and can switch over freely as before?
dahuzi said:
It's a great news that the I6 Air is possible to upgrade to Win10 now. But before taking action, I have one question to clarify. After the upgrading, is the Android system still there and can switch over freely as before?
Click to expand...
Click to collapse
Yeah, windows fill the partition space that is already configured, it means even if you resized your android to a 8 Gigs partition, the windows will not erase it !
For the switching process, it is even better because YOU install the switcher, and configure it the way you want (dektop shortcut, taskbar button, ...)
I can bring windows screenshots on purpose if needed
regards,
Stalker2106.
stalker2106 said:
Yeah, windows fill the partition space that is already configured, it means even if you resized your android to a 8 Gigs partition, the windows will not erase it !
For the switching process, it is even better because YOU install the switcher, and configure it the way you want (dektop shortcut, taskbar button, ...)
I can bring windows screenshots on purpose if needed
regards,
Stalker2106.
Click to expand...
Click to collapse
Thanks for clarification, another question, how about the system activation? Will the system become activated automatically?
And moreover, the drive folder you provided has no more WinPE available. Please check.
Thanks again.
dahuzi said:
Thanks for clarification, another question, how about the system activation? Will the system become activated automatically?
And moreover, the drive folder you provided has no more WinPE available. Please check.
Thanks again.
Click to expand...
Click to collapse
Hi, bad manipulation yesterday led me to delete archive from drive, but its uploading again !
I tried again the tutorial because of the problem of " scharrrfi" to check if its not broken in any manner, and it worked flawlessly !
Furthermore, the system is yours, and therefore, is not activated by default, it asks for a serial key !
Files should be on the drive later today
EDIT: The files are up on the cloud !
Now I wait for my ISP programmer. But I know, why I get first the message "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f"". I found the solution in another forum. There was a problem with the formatting of my USB stick. I have to format it with an partitioning tool to GPT. And then it should work.
If I know this before, I have not to try to flash the bios...
scharrrfi said:
Now I wait for my ISP programmer. But I know, why I get first the message "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f"". I found the solution in another forum. There was a problem with the formatting of my USB stick. I have to format it with an partitioning tool to GPT. And then it should work.
If I know this before, I have not to try to flash the bios...
Click to expand...
Click to collapse
Yeah, I admit that was kind of my fault telling you that upgrading your bios would change anything in your boot configuration, i'm so sorry
Let's hope this will work, still hope, windows 10 will make its way to your tablet no worries !
After some days of using it i report some glitches though:
Orientation sometimes get rekt, i dont know why but you have to set it manually...
Also the tablet is not as responsive as it is on android, but I guess power consumption is higher on windows, as it heats much more !
Sometimes i touch the part near the lens and it feels really hot !
Btw when on low battery, the power saver settings got me doubling my battery time, which is nice !
And on idle, locked, the battery charge way faster than on android.
Hi I have an other error - if I boot with the bootia file I got short 4 error messages: UEFILINUX ERROR [uefi_get_battery_status:121] Failed to get battery status - und error 160, 121 again and 149, all error with the battery. I haved update the firmware from 201 to 206. The battery is over 90% full in windows. Have you an idea whats wrong?