hi everyone, i got a real problem here... my i-mate Pocket PC is not charging... i think that one of the wires in the charging connector (in the phone) is half broken.... but maybe this is not the problem, alse when i put the battery in the AUX battery slot available in on the cradel it is not chargint too (AUX BATTERY led is not turned ON). i dont know what is actally happening... please help.. i cannot charge the phone any more..!!
If you take the PDA and battery out of the cradle, and unplug the power to it, plug the power back in, and see if the AUX Battery LED flashes.
If it does, the cradle is still getting power, if it does not, then the charger, or cradle may be faulty.
With your device, you will have had a power cable adapter so you can plug your PDA directly into the power adapter without the need for a cradle.
Try charging your device with this to see if it's the cradle or power adapter.
no the cradel is okay... thanks.. but i found out a bigger problem .. one of the power strips in the connecter is broken thats why it is not charging.. still dont know what to do
Guys i am gettin crazy here; my PDA Hymalaia; is giving me some bad times... when i plug the chrager to it, the orange led goes on as if it is charging, but when i tap to the battery meter it is still the same percentage. it simply dosen't charge the battery... now tell me what is this????????
repair history that i made by myself, (hope it would be helpful):
1. The power conector had some adjustments made; one of the tiny tiny wires on the connector was pushed inside by mistake, so i had to open the PDA push the wire back out. and things went just fine
2. Whenever i place the charger, it dose not charge and no indicators are on (orange indecator) so i opened the PDA again to check; i found that the metal piece holding the plastic connector not stable, made some adjustments, and thing went fine again.
3. Now when i put the charger i have to push the connector upwards for the PDA to start chargin, finally the orange indicator is on; but still not charging. why????
Please help me with this... my PDA is useless at the moment.....
thanks
I don't know if this is relavent to you but my i-mate will not charge with a car charger if the battery is under 40% charge, it will charge in the house cradle no worries bu tin the car charger the light comes on to say it is charging but it continues to use the battery, even in the setting under battery it says it is charging. If the battery is over 40% the car charger works fine.
Hi,
Can somebody tell me how to charging the battery when there is no
OS on the PPC.
I need a full battery to upgrade or flash a rom version on the PPC.
With a low battery it gives error when i want to flash a rom on the PPC.
Plz. help me.
Thnx,
Alfa156 :?:
Why not just connect it to the external power?
Flashing is always safest whilst connected to a power supply.
V
Also, you can charge battaries from USB by mini-USB cable. OS does not needed to charge.
Hi XShell,
What do you meen with charchinging with the mini USB?
I have tried with the USB cable from my MDA connected with yhe desktop
and i tried the battery charger with the adapter and the mini USB connector at the other end, and both methods doesn't works.
Normally you get a orange led when it's charging the battery but both method it's not burning.
So please tell me what you meen.
Thnx,
Alfa156
Here's the way to charge battery directly from charger.
This method was invented by Jasse from PDAclub.pl, BIG THANKS to him
Scheme is in the attachment. You need some charger, it must be between 3-6v. Cut off the plug, then connect red cable to minus, and black/white or other to plus. Hold the cables in that position for 2-3 minutes then try to flash. Remember: If battery will get too hot disconnect it immidietly.
YOU DOING THIS AT YOU OWN RISK
Hi J-A-J-O,
How must i hold the battery?
Should i hold it with the text up or down?
Thnx,
Alfa156
Here's the 3d painting Now every thing is clear.
Seems like your charge controller is dead...
And flashing ROM wouldn't help, i think.
Btw , since allways , Red = + and Black = -
Perhaps someone is reinventing the electronic way
of electrons working??? :twisted:
Cheers
XShell said:
Seems like your charge controller is dead...
And flashing ROM wouldn't help, i think.
Click to expand...
Click to collapse
Actually, I think the OS has to be present to allow charging. I noticed mine wouldn't charge until everything was fully operational when I was updating my ROM. The lack of charging capability is one reason the guides say to fully charge the magician before attempting a ROM upgrade.
Hi J-A-J-O,
I think the reply that red is plus and the black is minus is correct in the standard electricity.
I also tried to charged the bat directly with a adapter both in two ways
I meen that the plus and minus i have switched it but both way i didn't get any results.
So anyone please help me.
Thnx,
Alfa156
You should try to charge battarie in other Magician (from friend or others).
I also have charged in both ways, but black - minus, red - plus is 100% correct, I already change it on my pic. When I finnaly turn my magician on, the battery was charged in 90% so this method works. You can try to hold cables longer example for 5 minutes, but disconnect when battery will get warm
You still can't turn device on, you can try my method with battery cover
Hi Daxian t32+ users,
I am facing some problem in charging the T32+ through USB charger. Meanwhile most of the times also charging with wall charger. In the charging display it shows 85% charge available. But the display or LCD becomes blank but the LED is keep on blinking with yellow light. Is there any problem with the battery or in the set and how to resolve this problem?
Thanks,
Srini
hi everybody,
I, unfortunely, apply an incorrect polarity on my ipaq hx2750
the battery was out , I changed it by a new battery
now I have trouble with the charge circuit because
sometime the orange blinking light is blinking when it's charging, or is OFF
sometime the orange blinking light is ON when it work with the battery and not in supply
I have an other trouble, the hx2750 don't swap between battery or supply icon when I plug or not on the supply charge
who know how can I repair it ?
thanks