hi everybody,
I, unfortunely, apply an incorrect polarity on my ipaq hx2750
the battery was out , I changed it by a new battery
now I have trouble with the charge circuit because
sometime the orange blinking light is blinking when it's charging, or is OFF
sometime the orange blinking light is ON when it work with the battery and not in supply
I have an other trouble, the hx2750 don't swap between battery or supply icon when I plug or not on the supply charge
who know how can I repair it ?
thanks
Related
hi all
i have a pda2k which was dead after applying usb cable to it. i turned it on by shorti circuiting its fuse near battery terminals which is written N on it. it turned on but now the yellow light of chrging remains on and it is continously charging. plz tell me the solution to it.
thanks
Hello, I have an Orbit 2 and I want to use my emergency charger if I´m for longer time outside. I used the charger before for my TH55. Now I changed the plug to connect it to the Orbit 2 and build in a diode that the voltage is about 5.3V. Does anyone know, is it possible to connect without problems the charger without any diode to the Orbit 2? For this it would be about 6V (with fresh batteres). If the current flows I think there is less than 6V, because the internal resistance of the batteries.
With the diode it works, but without I would have more capacity.
Thanks for you answers!
orgy2
Hi Daxian t32+ users,
I am facing some problem in charging the T32+ through USB charger. Meanwhile most of the times also charging with wall charger. In the charging display it shows 85% charge available. But the display or LCD becomes blank but the LED is keep on blinking with yellow light. Is there any problem with the battery or in the set and how to resolve this problem?
Thanks,
Srini
simply my uni doesnt charge the orange lamp keep only blinking i tried all kind of chargers no use waiting for all masters
drsalsa said:
simply my uni doesnt charge the orange lamp keep only blinking i tried all kind of chargers no use waiting for all masters
Click to expand...
Click to collapse
ok try to sync your uni with computer and see if it syncs... if not your usb port may be broken... if it does then that might be issue with battery... try another battery and see...
I assume from your description that the battery is completely dead?
The led will blink red if there is not enough charge to power on the device.
If the battery is this dead, the device will not charge it.
You will need to use a seperate charger to charge the battery enough for the bootloader to initialise.
The device can only charge your battery if it has a small amount of charge already.
It can not charge a completely drained battery.
hi
sorry i cant speak English good
but
I have a mobile
htc sensation xe
... Are making a otg cable manually, I to Mobile Connect I connect said wires, plus and negative, the notification lights charge, and
led notification
Bright, stays without being any charge to the my mobile phone is connected
When the voltage of the batteries above 3.8 mlA (amper) is the LED turns off
Namely
if the full charge I voltage batteries to 4.2mlA it seems that the lights is bright as long a battery from 100 to about 60-70%, and when the voltage of battery arrive to 3.8 mlA ,notification led is off and show not charged (fake charge)
be several Rom , Custom rom , recovery install and try them all, but not solved
From you friends, I want to
schematics map of htc sensation xe
To me a comment
The problem, the other is TC when the charging connector to make the switch, I have again connection occurred at the location of the socket, charge the phone
And the cause was this mobile with charger, charging is not
Mark charging you, but no amper arrive to battery
it was be exchanged
Previously, that right was
150-300 mlA was charged
Please you can help to solve I
Multiple socket and charger together, test them all