Hi, I have been asked if there is a html or java script that will allow someone browsing a webpage on an xda to tap a phonenumber on the page and it passes the number to the phone dialler so the number can be called?
hope that is sort of clear, and in the right forum?
cheers
Si.
try with Call
it works on PC, but i don't tested on PPC
bye
crino said:
try with Call
it works on PC, but i don't tested on PPC
bye
Click to expand...
Click to collapse
cheers for the reply
Hi
I am just trying to make this happen but at least on my wizard it doesn't work. Anbody made this happen?
BR
Dnaiel
Hi
So finally I found out:
Call customer service
I am a happy man now
BR Daniel
Related
Hey hey
Have any tried to install skype on there Tornado and got it to work?? Or are there any SIP client there can work on a smartphone??
I want to use my Tornado as a IP phone when I'm home!
Kind regards
Jimmi Wolff
it works on my tornado..try this link
http://oregonstate.edu/~keiterk/?p=9
I use some prog for SIP but it's in Russian. Do u need it?
hey
mustafin, the SIP client you have which is in russian, could you please upload it to here so that perhaps someone can work on translating it into english
how does it work? does it allow you to use your sp5 as a voip handset through your existing voip account?
thanx
mustafin said:
I use some prog for SIP but it's in Russian. Do u need it?
Click to expand...
Click to collapse
I will be much obliged to you if you can give it to me
Could you please also send it to me [email protected]. I appreciate.
What about the BeWIP client?
Sure, it's in french, but I bet you can use it for any WM smartphone. Do a google search, it's supposed to work on the Tornado.
personally, I've been using SJphone for Pocket PC, but ripped out the needed files and ran it on my SP5m.
It works well, but the interface is awkward since it was designed for a touch screen.
Has anyone found anything that works well and was designed for smartphone?
Download the Skype 2.2 for tornado and it works excellent. No delays or echo found..
http://www.skype.com/download/skype/mobile/downloading_smart_beta.html
Let me know how it works ?
yeah, I've used it.
I meant SIP so i can bring my existing VoIP provider with me.
I have GoSIP but again it's a french client
I'd give it a shot... I took a little french in high school...
Still looking for sip client for my sp5m. I installed Skype (not sip) and its working great. However, I would like to tap a sip client to our VOIP system we have at wrok.
SJ Labs - Did not releas one yet
All other I saw, are asking you to connect to a pre-define SIP server
Any help/tip is welcome.
sebbes said:
I have GoSIP but again it's a french client
Click to expand...
Click to collapse
I tried to get it form their site, but it seems that they want me to download it in stages through SMS (my french is rusty, but that's what it looks like).
Do you have the complete .exe or something that I could try?
Skype works for me
acsguitar said:
Skype works for me
Click to expand...
Click to collapse
Hey Acsguitar.
I think you're missing the point here...
Sure, you can have skype call a landline for a fee, and even have your own incoming number for another fee... But those of us who already have a regular VoIP-based landline phone number (such as with vonage or broadvoice) can call through their already existing service using their already existing number with the proper SIP compatible softphone.
I am able to take my home number with me when I travel using SJphone, but because it doesn't have a smartphone version, the interface is a bit buggy when you run it. I'm looking for something smoother.
Dishe said:
Hey Acsguitar.
I think you're missing the point here...
Sure, you can have skype call a landline for a fee, and even have your own incoming number for another fee... But those of us who already have a regular VoIP-based landline phone number (such as with vonage or broadvoice) can call through their already existing service using their already existing number with the proper SIP compatible softphone.
I am able to take my home number with me when I travel using SJphone, but because it doesn't have a smartphone version, the interface is a bit buggy when you run it. I'm looking for something smoother.
Click to expand...
Click to collapse
Try WengoMobile, I have found it useful thus far.
Got One
Hey Guys
Been using this Software from Peer 2 Phone for a while now and it works fine with my Voiptalk account, only downside is you have to ask them very nicely for it on an individual basis, and then they E-Mail it to you, there website address is: http://www.peer2phone.com/telephony.html
Hope you all have the success that I have with this SIP client, happy Hunting chaps,
Kind Regards Ashe
sion said:
Hey Guys
Been using this Software from Peer 2 Phone for a while now and it works fine with my Voiptalk account, only downside is you have to ask them very nicely for it on an individual basis, and then they E-Mail it to you, there website address is: http://www.peer2phone.com/telephony.html
Hope you all have the success that I have with this SIP client, happy Hunting chaps,
Kind Regards Ashe
Click to expand...
Click to collapse
Can you post it?
No!
You have to E-Mail them for the software, I am sorry I respect peoples software rights, I am just a bit ethical that way, however they will not have a problem, in fact they will be more that delighted to send you the software if you E-Mail them,
Kind Regards Ashe
i found www.go-sip.com
but im hoping someone something more better and faster
SIP Client
I use this in France : I don't know if it can help :
http://www.bewip.com/en-us/info/default.aspx
sandman_06 said:
i found www.go-sip.com
but im hoping someone something more better and faster
Click to expand...
Click to collapse
What about WM6 Standard, there's no "internet calling" inside ?
yup im using the one that comes with wm6... works fine... but only through a speakerphone;(
Hello, I'm from Bulgaria and my english is not really good... sorry. Check To this web page:http://www.fring.com/
piotroosh said:
yup im using the one that comes with wm6... works fine... but only through a speakerphone;(
Click to expand...
Click to collapse
Can you be more specific, did you find a way to make WM6 support SIP calls ??
A howto would be awesome
sebbes said:
Can you be more specific, did you find a way to make WM6 support SIP calls ??
A howto would be awesome
Click to expand...
Click to collapse
heres howto
heres the file
works fine for me with asterisk
Nice ! Thanks!
I strongly suggest fring (www.fring.com). My C600 (no WiFi) works very well with it. It works utilizes SIP networks as well as Skype and Google Talk. All in one!
Asterisk PBX
Hello, I connected my smartphone with my office Asterisk PBX, following Norus instruction at Vox forum.
By now I just can receive calls, but not able to makes.
Cheers
Tornado OMAP850 WM6_Tornado_VA_Alpha_01
www.casablancawines.com/sebastian
best call and sms filter "Magicall" not work on WM6 (service did not start).. any idea? I'm try remove startup service 'sddaemon and etc..' magicall not work... Sad
any idea?
You've right... but.
Run manualy "SrvInit.exe", then start MGCManager.exe too.
It will work full functionality.
Sorry for my bad english.
romkat said:
best call and sms filter "Magicall" not work on WM6 (service did not start).. any idea? I'm try remove startup service 'sddaemon and etc..' magicall not work... Sad
any idea?
Click to expand...
Click to collapse
htc kaiser duty rom 6.1 runs .. magicall runs just fine.. but little problem with sms filtering due to threaded sms I think
where can i get the magicall?
where can we find the Magicall Activation Code
SrvInit.exe can't find it anywhere not in the magicall cab , not in windows folder ,not anywhere in the wm6.1 of my handset with magicall installed.
can magicall run on WM6.5........does anybody knows about this??........i install it on my touch diamond P3700 and it seems to stop my ring and sms tone.....dont know if its a bug or something.........
WM6.5 has not been released yet.
NEW IMPROVED cab. Click HERE
*********
WM6.5 Only
*********
7 cabs for different tastes.
Tested and working on HD2 with no problem with good sound. It`s best to install on fresh OS. First install any of the "Ear/VoIP"(to enable native voip) cabs then install WOW HD included in attachment for louder sound and set all values to 100% except first one(srs 3d). Port 5060 enabled by default(make sure forward 5060 port in router for (possible) 2 way communication.
Please leave your Comments/Suggestions.
All credit goes to developers who invested thier time and effort to develop these programes, I was just able to combine them and made cabs + did some extra setting over 3 year period, as i have gained knowledge on this subject. These cabs are based on G.711 codec, so bit hungry on network. I advise to use these cabs on WLan with good reception.
Thanks.
09-05-2010
* Microsoft bug fixed found in all these cabs
++++++++++++++++++++++++++
sip/voip = native voip support + config tool
Wlan = Wireless always on
Ear = Sound comes out from earpiece
Dial = Dial Plan (doesn`t work)
Reg = PHM Registry editor
SRS =Increase Volume(louder)
+++refer attached files below++++
Thanks very much!
Tested and working
nathanpc said:
Thanks very much!
Tested and working
Click to expand...
Click to collapse
i can only receive incoming calls out going call is not working. where could i go wrong any help
shah_vm said:
i can only receive incoming calls out going call is not working. where could i go wrong any help
Click to expand...
Click to collapse
hi shah, I am in process of making new voip cab based on g711 codec with volume increase inbuilt plus 5060 port forward enabled by default. I will upload with in a week, are you using 6.1 or 6.5.
Reason for voice problem would be your ISP or Mobile carrier blocking packets.
Create Dialplan
Hi,
installing the cab was easy going but i am struggling with the configuration...
When i use the "create dialplan" tool, enter my configs and afterwards hit the "create" button it tells me that everything's fine. But where can i find this dialplan? I expected some file in the directory of the config tool or at least something on the dialplan tab in the config tool...
I tried several times (of course with reset afterwards) but always the same -- my configurations seemed to be lost.
What am i doing wrong?
Is the provider (t-mobile in my case) capable to lock the WM6.5 VoIP feature?
I have already tried several other solutions (fring and other softphones) without success...
BTW: if everything works what happens? How could i see that VoIP is active?
Thanks!!
Joerg
VOIP Almost working
Thanks for the Cabs. I was able to get Internet Dailing set up on my FUZE w/ stock 6.5ROM. I did the SIP provisioning with my provider and I can receive calls now. But, when I dial, I see that a "9" is automatically entered in front of the number I'm dialing which doesn't allow my SIP SIPsorcery/Sipgate dial plan to dial the number correctly. How can I fix this?
Modify DialPlan
forepj said:
Thanks for the Cabs. I was able to get Internet Dailing set up on my FUZE w/ stock 6.5ROM. I did the SIP provisioning with my provider and I can receive calls now. But, when I dial, I see that a "9" is automatically entered in front of the number I'm dialing which doesn't allow my SIP SIPsorcery/Sipgate dial plan to dial the number correctly. How can I fix this?
Click to expand...
Click to collapse
*****************************************************
Play with DialPlan according to your country code, area code. Otherwise try cab without DialPlan. See if it works. Thanks
*****************************************************
I am new. This is a test.
Windows 6.5
Looks like the files haven't been updated yet? Were these going to be put in a new thread?
Hi,
any screenshots and has anyone tested this in WM6.5.x?
thanks
This Ip Dial Plan Creator works. Credits to the author Jaap De-Wolff. It is the best i have found to set up VOIP.
I use the attached files to install Native VOIP in to all my WM phones and currently working great on my 6.5.5 ROM from Dutty HG_11.
Also the attached AutoAudioRoute (Credits to oruam57) which routes the audio to the earpiece for both VOIP and SKYPE calls. You need to first install AudioRoute 1.2.020 from Teksoft then delete the AudioRoute link file from the Start Up folder before installing this CAB.
Link to the thread in signature below.
I will like to check out your Ear Cab to see how it works and report back.
EDIT: I checked your CAB files (VoipEar & VoipDialEar) and found that you have an error in the .inf files with the regedit line:
reg_path18 = Software\Microsost\Today\Items\Internet Calling
It should read "Microsoft" rather than "Microsost"
Thanks for reporting this bug
----------------------------
will correct this today. Thanks
----------------------------
angusc said:
This Ip Dial Plan Creator works. Credits to the author Jaap De-Wolff. It is the best i have found to set up VOIP.
I use the attached files to install Native VOIP in to all my WM phones and currently working great on my 6.5.5 ROM from Dutty HG_11.
Also the attached AutoAudioRoute (Credits to oruam57) which routes the audio to the earpiece for both VOIP and SKYPE calls. You need to first install AudioRoute 1.2.020 from Teksoft then delete the AudioRoute link file from the Start Up folder before installing this CAB.
Link to the thread in signature below.
I will like to check out your Ear Cab to see how it works and report back.
EDIT: I checked your CAB files (VoipEar & VoipDialEar) and found that you have an error in the .inf files with the regedit line:
reg_path18 = Software\Microsost\Today\Items\Internet Calling
It should read "Microsoft" rather than "Microsost"
Click to expand...
Click to collapse
DONE
All good now
dhillonbros said:
----------------------------
will correct this today. Thanks
----------------------------
Click to expand...
Click to collapse
Doens't work on my Samsung GT-B7620 Windows Mobile 6.5.
Can you please post an instruction?
dimabelikov said:
Doens't work on my Samsung GT-B7620 Windows Mobile 6.5.
Can you please post an instruction?
Click to expand...
Click to collapse
If u want help you need to give a bit more details of your issues. Which CABs have you installed and what exactly are yout issues / symptoms?
angusc said:
This Ip Dial Plan Creator works. Credits to the author Jaap De-Wolff. It is the best i have found to set up VOIP.
I use the attached files to install Native VOIP in to all my WM phones and currently working great on my 6.5.5 ROM from Dutty HG_11.
Also the attached AutoAudioRoute (Credits to oruam57) which routes the audio to the earpiece for both VOIP and SKYPE calls. You need to first install AudioRoute 1.2.020 from Teksoft then delete the AudioRoute link file from the Start Up folder before installing this CAB.
Link to the thread in signature below.
I will like to check out your Ear Cab to see how it works and report back.
EDIT: I checked your CAB files (VoipEar & VoipDialEar) and found that you have an error in the .inf files with the regedit line:
reg_path18 = Software\Microsost\Today\Items\Internet Calling
It should read "Microsoft" rather than "Microsost"
Click to expand...
Click to collapse
when you say 'native' does this make voip the default dialer?
is it capable of switching back to normal radio?
how does it work
thanks for any insight
eigerzoom said:
when you say 'native' does this make voip the default dialer?
is it capable of switching back to normal radio?
how does it work
thanks for any insight
Click to expand...
Click to collapse
By Native i mean it is the "built in" Windows mobile VOIP version rather than a 3rd party installed "soft phone". Your Call carrier will always be the default phone service provider.
On the today screen, once you have installed the CAB file and registered with a VOIP service provider and filled in the SIP Configuration, you will see a line on your Today screen (if you have disabled Manila and gone back to the original WM Today screen. This will show your SIP provider and status:
SipDiscount: Available
OR
SipDiscount: Selected
Only when in the SELECTED mode will your phone dial out on the VOIP service otherwise all calls will go out on the Mobile carrier. You will be able to receive VOIP calls when ever "Available" or "Selected" are the display mode.
I only really use VOIP for making calls overseas as it is much cheaper than even using SKYPE for calling out to land lines or Mobiles Internationally.
thanks for quick clear reply
sounds good
here's the teksoft download link
http://www.teksoftco.com/storage/download.php?product=audioroute_ppc
finally it worked for me. thanks dillionbros.
WM6.1, SIP available but not selected
Hi,
I'm trying to use WM6.1 SIP instead of fring with which I've no problem to make SIP calls.
When using the WM6.1 SIP soft and SIP config Tool, I manage to set my account, I see my SIP provider available in the today screen, but I cannot select it. When clicking on available, I go to the phone settings but the status remains available (instead of selected) and my calls use GSM.
Does somebody knows how to fix that problem ?
My PDA is an AIRIS T483 with WM6.1 and up to know I had no problem when installing and using pocket PC softs !
Thank's in advance !
HI guys!!!!
Are you able to get answer field whenever you dial a customer care service number like *123# for vodafone india ?????
Iam not getting the field so not able to reply using that!!!
PS:I am from India,whenever we dial a number like *123# or *111# or *121# etc any thing like this which will give a list of options so that we can select our desire option by entering respective serial no. and send a reply using a answer field BUT IN MY OMNIA W IAM NOT ABLE TO GET THAT FIELD TO SEND A REPLY!!! WTF ...Please any1 having this issue?????
USSD codes are not supported
rajan17_88 said:
USSD codes are not supported
Click to expand...
Click to collapse
What is ussd codes?
imr.uvce said:
What is ussd codes?
Click to expand...
Click to collapse
That's the technical name for the feature you described - http://en.wikipedia.org/wiki/Unstructured_Supplementary_Service_Data
Windows Phone 7.5 does not know how to handle them.
Hope this helps,
Stephen