i can't seem to save new words into my intellipad. It worked during the first time hard reseted my device... but now it doesn't seem to register in new words anymore.
What's the procedure to insert new words into the intellipad? I typed new words but it still doesn't register the word into the system everytime i do a soft reset.
Related
Hi all,
I've got a strange problem with my wizard:
When I'm pressing s or h on my hardware keyboard, pocket outlook crashes and the phone becomes extremly slow - in fact, it's unusable. Amazignly this only happens, when s or h are at the beginning of the sentence (as the first letter). All other letters are fine.
The problem came up a few days ago - but I don't know what I have changed in the meantime...
Im using TNT 11.0.2.0 ROM (WM 6.1).
Any idea?
Regards,
Rudi
Is it definitely at the start of the sentence only... or could it be when you haven't pressed another key for a while, wherever you are in the sentence?
There is the feature which runs send & receive when you press and hold S. I think H is help. There are other press and hold combinations too.
It is a long shot, but maybe it is related to that feature somehow? Maybe if that feature isn't working correctly it could cause the crashing whilst it tries to load that feature. In fact the first time it runs, it asks you to confirm a message telling you how it works. If that screen got to the back somehow, maybe outlook is left waiting for your input, but you can't input OK as it is behind the current visible screen.
Of course it might be something completely different....
I tought something similar but could not find out, which function will be startet pressing s or h.
So I did a hard reset and installed everything new, and after the hard reset, s and h work as they are supposed to do. This indicates, that some software I installed (and couldn't remember what software it was) installed a function which did not work properly.
Regards,
Rudi
I have a HTC Kaiser phone with HTC oficial spanish rom.
My problem is...that after some weeks after a fresh rom load, calls start instantly failing when dialed. Ill explain myself, when I open my contact list and dial someone, i dont have a problem, but when i actually dial a new number and press send, the call will last 00.00 and just shows "Call finished".
Any clues??
Thanks for your time and answers =)
bump, help please?
it amy have been a bad rom flash , or you may not have hard reset after the flash.
also sometimes phone problems require only a soft reset (put your stylus in the little hole in the bottom to do this)
HARD RESET:
for a hard reset hold down the two soft buttons and then put your stylus in the hole HOLD THE BUTTONS DDOWN UNTIL THE SCREEN COMES BACK UP it will ask for confirmation and select yes by hitting the send button
Hi all..newbie to this site and to smart phones so excuse the steep learning curve !
Have had the phone for a few weeks and learning lots. All of sudden yesterday when trying to make a calendar entry, the full QWERTY, compact QWERTY, and phone pad can no longer be used to enter text. It's stuck on numeric mode. Tapping the "abc" key on the bottom of the full QWERTY keyboard doesn't change anything. Can still use transcriber and full keyboard for now. BUt when switched to Note program, all entry methods work. Have not installed any new programs lately (besides a few games and new calculator). Have been using S2U2 and Diamond tweaks to help with a few other problems...Help please since this is now my primary calendar and runs my life so need to have this working again!!
you have this problem too? i have the htc diamond keyboardon my device(mwg zinc ii)but sometimes it just enter numbers only. to solve this, i tap on option and tap ok then it works fine again. most people who installed the htc diamond keyboard on their non htc device have this problem too. but this is the first time i heard of a diamond having this problem. did you upgrde to the latest diamond rom?
Yes it's on a brand new Diamond..running ROM version 1.93 dated Oct 30/2008 so I am assuming it's the most up to date one. Just tried it again now, and it let me enter on word in full QWERTY, then it automatically changed to numeric and locked me out of letters again....IT's FRUSTRATING
Ok..thought I bump this up to see if will get more attention.
Contacted HTC Helpdesk in the meantime, and suggestion was to hard reset...ARRGH!!!!
Just so I'm clear, after a hard reset, the device will turn back to factory settings, and all I have to do is sync it with my PC to bring back data, then reinstall programs that I've added, and then tweak the settings that I've already done and the phone will be back to "normal"??? Or are there things that the phone providers (Rogers) put in that won't come back after a hard reset???
this is bull****...mine is doing the same thing..and if u do a hard reset there are a lot of things that have to b reprogramed by sprint
HTC touch diamond full qwerty troubles
I have also had troubles with my touch diamond. Twice I have lost the ABC capability of the full qwerty option and the only option both times was to do a hard reset. The cell phone company could not figure out any other way to fix the problem and it did seem to fix it but there has to be something wrong with the programming to be causing this over and over again.
same as above. stuck number mode for both keyboards on a diamond.
Sometimes it has this kind of problem and when you power it on again it will work well. Everytime when I had this problems, I just power off and on. Then everything is okay. But I don't know the reason. Is that because some apps in the phone? Or the CPU is too busy to react.
SADLY I WAS FORCED TO HARD RESET SO PLEASE DON'T ANSWER THIS NOW.
I have installed Sone WM6.5, most recent built ( thread http://forum.xda-developers.com/showthread.php?t=433808 ). I have set the lock using a simple 4 digit password, but the battery died on my way home tonight (typically in the floods!).
I got home and charged the battery, but I cannot unlock the phone. I can slide the slider to unlock, enter the 4 characters (2233, so it isn't as if I have forgotten it!) the 4 characters are shown at the top as white circles, so it has accepted the input, but if I press the unlock/contacts/mail buttons, they depress (i.e. acknowledge they have been pressed) but nothing happens. If I put an incorrect password in, nothing either - It doesn't tell me that I've entered the password incorrectly!
Is there anything I can do without having to hard reset?
Thanks in advance.
Aubs
P.S. I have also posted this in the SONE thread HERE in the Diamond > Diamond ROM development forum as I am desparate to get it sorted - So if I get a reply on there first, I'll let this thread know. Hope this isn't against the board rules
Hey there .. any cure for this problem ???
nmn8008 said:
Hey there .. any cure for this problem ???
Click to expand...
Click to collapse
Sadly not. I had to hard reset and so lost a few contacts that I hadn't backed up :-/
Good luck if you have the same problem!
Aubs
i had same problem
sadly i just suffered from this same issue....lost a few txts that i couldn't get to...WM needs a safe mode....
hard reseting now
stop2think said:
sadly i just suffered from this same issue....lost a few txts that i couldn't get to...WM needs a safe mode....
hard reseting now
Click to expand...
Click to collapse
I wonder if this is getting more common? I appreciate that only 3 people affected so far doesn't raise it to pandemic levels yet!!
Aubs said:
I wonder if this is getting more common? I appreciate that only 3 people affected so far doesn't raise it to pandemic levels yet!!
Click to expand...
Click to collapse
I am in, you can add me to the list of those affected by the same problem.
same here, just started this morning...i put in the correct password, but unlock icon doesnt work....dont want to hard reset because the messages i need but oh well
Edit: it works now--either two solutions. 1st a screen popped up saying i entered the password incorrectly too many times and i had to enter what i was told to enter on the screen OR 2nd, it couldve been because i entered my original password in landscape mode...hope this helps u all with the problem
I was able to resolve this problem, but I'm not sure the correct solution and I'm not ready to try again!
First the symptoms are exactly the same:
- I was talking in the phone till the battery died, when I recharged the battery and tried to unlock the unlock-key get pressed but doesn't work.
Second I found this thread by google, and also found many other results, the usual solution was to hard-reset ... but my problem was that I cannot reset since my firmware is not original and I don't have any firmwares on any SD-cards ...
Third, again I'm not sure the correct answer but here is what I can tell:
- My phone is iPAQ 910c
- I typed the pin
- I then typed on the letter "z"
- I then typed on "Fn + z" (Which is the character "*" ...)
- I repeatedly pressed on "z"
- I pressed enter many times and the right-arrow ">" many times
- I pressed on "z" again
- I was a bit nervous so I think I pressed on those two keys many many times till finally I found the device unlocked so I'm finally happy
Note:
- The idea of pressing on "*" come from this link: http://www.fixya.com/support/t1457097-unlock_samsung_i780_phone_soft_touch
I got it after many google searches and it worked for me too!
I'm also not able to unlock... Same symptoms : Unlock icons doesn't work, either pin is correct or not.
It happens just after connecting my HD to my new Win7 laptop using Windows Mobile Device Center.
Synchronization was complete and one hour later I had to soft reset because of display problems.
I still can access my Touch HD folders by Windows Mobile Device Center and synchronize it, but i can't unlock it...
Strange.
I have the same problem, but i cant even do a hard reset because my keys are locked, any solution?
Hi friends,
I have a HTC TATTOO I received a year ago and now I measured code my little brother played with it and put it to me
And he does not let me go with GMAIL account (password and email are correct)
Version 1.6
Please Help
I understand all of those words, just not in that order.
I think you may be referring to issue 3006 on pre-Eclair Android versions.
When you failed the pattern too many times it blocks and you have to put your Google account and password to unlock it, but the bug prevented it from unlocking, showing an 'Incorrect user/pass' message.
You need to do a factory reset to solve the problem. Follow these instructions:
1) With the phone turned off, press and hold the HOME and BACK buttons, and then briefly press the END CALL/POWER button.
2) Press the ENTER button to begin the reset process. (Otherwise, press the END CALL/POWER button to cancel.)
Mind that doing so will make you lose all your data (SMS, apps, etc). SD card will be fine thou.
I hope I have deciphered your post correctly. The truth is, it's a bit hard to understand. :S