Hi,
I have a 1GB SD card which i use with my magician. the problem is that if i dump my ROM it uses the whole SD card which means that when i read the ROM i get a 976MB file which i know is far more than the actual size of the ROM. When i used the MKBigstorage to remove the extended storage i ended up with a 27MB file. my question is is there a way to reduce the size of the ROM to the actual size on the device?
many thanks in advance
It's an issue of ntrw. You could cut the dumped file manually using an hexeditor....
You can search after HTCE and cut off the file afterwards....
Stefan
:?: Hello @ll,
can anyone tell me how i do resize an image .nb1 made with ntrw
from a 128 Mb Card an can i format the sd card in raw format usigng by the xda with a simple format program instand of romupdate.exe ?
A 64 Mb image is needet for my frinds on the other side of the world.
Have anyon a idee for my ?
Thanx,
xda.glawion.de,
You can cut the .nb1 at around 64MB. When you download eg. a BS rom, you can see where they end. It reads something like 'htce'. The rest can be skipped, viewing with a hexeditor ofcourse. But becarefull this 'htce' is on more places in the rom. Also mksbigstorager wcan perform this trick & will convert the rom to a BS one as well.
Maybe you can dump an image with ntrw via your magician with cardexport over the mbr, don't forget to uncheck 'protect mbr' I didn't manage though. Otherwise use romupdate as you said, after that the mbr is gone and you can write the newly .nb1 on it so a magician will see it.
Good luck, M
128Mb original backup ?
Yes.
128ROM copy 128ROM2
open 64ROM hacked, copy all hex to 128ROM, save.
open 128ROM2 original, copy 416 bytes to 128ROM, save.
128ROM ready to write Card 128Mb !
Hello Guys.
Maybe someone of you can give me a helpful hint.
I´m running a Magician device, but i think it´s not important which device is used. With the device I´m using a sandisk Wifi card with 256 MB Storage integrated.
The last days i tried to download a file with approx. 30 MB. SD-Card with Wifi was complete clean, but the Memory of the device just have about 24 MB free. For downloading I used the integrated IE in the WM2003SE. The download should be saved on the storage card, but the download failed because of not having enough free space. So I think the device first downloads the file as temporay file on the System memory and then copies it ro the SD card.
So, how can I change this to be able to download files directly to the SD card?
Stefan
My USB Mini port seems to be damaged. I can charge the phone but when i connect it to my PC, the orange light lits and the phone gets charged but it is not found by my pc. So pls let me know how can i upgrade to wm 6.1 through sd card flash.
The solution is:
U need
ntrw ftp://xda:[email protected]/Magician/Tools/Backup_tools1/ntrw.exe
wm6.1 nb1 file http://www.mediafire.com/?sharekey=02c513f13b6fba677f7ec40ada4772a6e04e75f6e8ebb871
If the 1st method doesnot work then u need the backup of existing rom Click here to know how to back up ur exsiting rom http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
the hex editor http://www.hhdsoftware.com/Download/free-hex-editor-neo.exe
Method 1:
write to the sd card using
ntrw write Cotulla6.1.O3.nb1 F:
F: is ur sd card drive
There will be an error saying parameter incorrect. dont worry. Insert the card into the phone and enter the bootloader( Power+Camera+ SOft reset). A message will come asking you to press power button to flash. Press the power button and wait for complete flashing. in the end there will be a error that checksum failed . dont worry and do soft reset. Hurray u now have wm6.1 on ur magician.
Method 2:
If this doesn't work try this.( U should have a backup copy of ur old rom nb1 file.)
copy the first 416 bytes of ur old rom to the 416 bytes of the rom downloaded using hex editor
write the new rom to the sd card and install as in method 1.
It's not possible to install my rom via SD card.
Sorry, it designed for RUU flashing only.
I was wondering this myself...
Are you sure, Cotulla, that following this procedure would fail with your ROM?
Please someone try and if sucessful pls upload the .nb1 file so that i can write it to SD card and flash it through SD card. Thank you in adavnce
I can dump my ROM for you if you're willing to test to flash it.
please. i will try on my o2. thanks
Here it comes: click. Password is xda-developers.com.
the file appears to be too small only 23 mb . coutulla's rom was somewhere around 50 mb. will this work. i will try tomorrow as i am outside & donot have pc access
That's because of compression, the file itself is 63.7 MB.
I was planning to try this as well, but I don't have a memory card at the moment.
Keep us posted and good luck
As MusikMonk stated, this file is compressed and crypted with 7z. Haven't you heard of 7z yet? It's about time!
I doubt it will brick your Magician, since it's not overwriting the bootloader. Thus you can always flash you beloved old ROM.
While writing the file to the memeory card i am getting this as output.
NTRW v2.00
Removeable media
Cylinders: 0:120
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
WriteFile(): Cotulla6.1.03.nb1 -- the Parameter is incorrect
When i put the memmory card in my PDA and enter the bootloader mode only the screen with Serial and v.1.02 is there and there is no option to install press power button.
You must have done something wrong when filling your SD card.
I get that "press power to flash" message.
I hope someone will eventually try to flash that file... otherwise I made a lot of effort for nothing :-(
So does it work or not???
I used 1 GB Memory card. The Problem Might be because of than. Pls Letme know what memory card u used. Shold I used 64/128 MD card instead of 1 GB. Pls Help
64MB is a few bytes too small, 128MB is sufficient. I used a 256MB card... maybe the boot loader is unable to read much bigger cards... if my 16 GB card were empty I could give it a try... ;-)
I tried to copy the Cotulla.nb1 file on my SD-card, but it doesn't work. I used a 2gb and 128mb card...
I copied the ntrw.exe and the Cotulla.nb1-file to c://user/username. Then I write "ntrw write Cotulla.nb1 j:" in the black DOS-Window and press enter. j: is my SD-card.
Now there appeare some lines of text and I can wait about 3 minutes until there comes something about a wrong parameter...
But as I understand it, this should be no problem.
But the problem is when I try to take a look on the SD-card, there comes a window, that says that I must format the card. I cant open it... When I take out the card from the card reader and put it inside again, I can see what is inside on the card. But there is only one folder with the size of only about 130kb and no ROM...
My OS is Vista.
What am I doing wrong???
Magician boot loader does not expect any file system on the SD card, thus ntrw writes the OS directly to the first sectors of your card. When you insert this card now anywhere Windows does not find any file system and recommends to format. That is correct (as long as don't answer yes) and shows writing WM6.1 was successful (given your card is big enough and failure free).
To make clear: you shouldn't be to browse that card in Explorer when you wrote WM6.1 on it.
Ok but if I put the card out of the reader und back again I can browse the card and there is nothing except of an 130kb small folder...
And if I put the card into my magician on bootloader, nothing happens...
What could be the reason for that?
I tried with 256 MB memory card I am gettin gthe same message while writing to card.
NTRW v2.00
Removeable media
Cylinders: 0:120
TracksPerCylinder: 255
SectorsPerTrack: 63
BytesPerSector: 512
bufsize is 65536
WriteFile(): Cotulla6.1.03.nb1 -- the Parameter is incorrect
And when I enter the bootloader mode with the card Inserted I get the message:
SD Download
==========
Sections=1
Not allow
update!
But with the same SD card when i write my old ROM( whic i had backed up) I get no error and when I insert the card and enter Bootloader mode I get the message :
SD Download
==========
Sections=1
Press Power to Flash
This means that there is some problem with the nb1 file . So kindly someone try it and post the results
one more thing. The backup.nb1 which i backed up from my sd card is 243 mb big. So i feel that the nb1 file which U extract from your card should also of around the same size and not 65 MB. Correct me if i am wrong.
I tried to extract nb1 file after writing ur rom to my sd card. it is also 243 mb big.
"Hello Guys.
Maybe someone of you can give me a helpful hint.
I´m running a Magician device, but i think it´s not important which device is used. With the device I´m using a sandisk Wifi card with 256 MB Storage integrated.
The last days i tried to download a file with approx. 30 MB. SD-Card with Wifi was complete clean, but the Memory of the device just have about 24 MB free. For downloading I used the integrated IE in the WM2003SE. The download should be saved on the storage card, but the download failed because of not having enough free space. So I think the device first downloads the file as temporary file on the System memory and then copies it to the SD card.
So, how can I change this to be able to download files directly to the SD card?
Stefan"
This is the question that some guy asked back in 2006. bun none answered. I have the same problem this days with my HD2 on win 6.5 with 8GB SD card,but only 46MB free integrated memory. I was try to download 80MB file from internet, but it was impossible because both opera and IE making temp file in main memory, and after successful download it was been removed to SD card and cleared from main memory. How to avoid making that temp file and allow download some file bigger then the free main memory? Can anyone help?