When I start upgrading ROM (Qtek 1.11.00 final) my mini struck at boot loader screen and my PC struck at
"Checking the information from your device...please wait...
Don't disconnect your device from PC or power supply until
the upgrade is completed "
I have strucked at this screen for an hour
what should I do ? Please help me . Thank You
I think you have not disabled the activesync USB connection yet. Do so, and reconnect your mini to your laptop/pc via USB again. then run the installation program again, u should be alright.
tt's what I faced earlier.
zenkinz said:
I think you have not disabled the activesync USB connection yet. Do so, and reconnect your mini to your laptop/pc via USB again. then run the installation program again, u should be alright.
tt's what I faced earlier.
Click to expand...
Click to collapse
I've tried this and I'm still stuck in the opening screen. Any other advice?
Regards,
Rajesh
rajeshr said:
zenkinz said:
I think you have not disabled the activesync USB connection yet. Do so, and reconnect your mini to your laptop/pc via USB again. then run the installation program again, u should be alright.
tt's what I faced earlier.
Click to expand...
Click to collapse
I've tried this and I'm still stuck in the opening screen. Any other advice?
Regards,
Rajesh
Click to expand...
Click to collapse
1. first mini must be in bootloader mode (screen will show serial)
2. disable USB in activesync, plug mini to USB cable (new hardware detection should occur and mini screen will show USB instead)
3. USB cable direct connect to laptop/pc..dun use USB hub..
should work..
Even I had the same problem
Thanks a lot it is solved now 8)
Related
my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
I assume you have read the following 2 links? If not, read them now and follow the instructions very carefully.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I had the same problem as you, and was able to restore my Uni with a new ROM using the second link.
But the first problem is getting your PC to stop displaying "USB device not recognized", unfortunately this is quite difficult and I actually didn't manage to do it with my main PC! I had to use an old laptop with USB 1.1 and only then it worked fine, after installing Activesync 4.5.
Basically the Uni sucks full 500mA out of the USB port, so try unplugging ALL other USB devices from your PC first, and if that doesn't work then you will have to try another PC. Some work better than others, maybe you have an old laptop lying around which has at least USB 1.1, or could use a friends PC?
Don't bother hard resetting any more, in this state you can only do normal reset and enter bootloader mode. You will have to try combinations of this whilst plugging it into the PC, and also try different USB ports. Also try entering bootloader mode whilst the Uni is plugged into PC, and try without and plugging it in after.
If you manage to get the device recognized in device manager, and the display change to USB, then follow the instructions in the Wiki above and your device will be restored.
And make sure to flash a ROM that does not include a new IPL/SPL, that means don't use any network default WM5 ROM!!! I used Tomal's 8.0, I recommend that when flashing to recover your device.
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
yasoo157 said:
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
Click to expand...
Click to collapse
can u tell me how u got ur uni working again im still stuck at the screen where it says press x to restore defaults and 0 to exit????
jasjar died
I have exaclty the same problem with my jasjar. help!!! usb is not working .....and how can I find Tomals 8.0 ......
Dear All Frenz..
Could anyone help me to solved this Problem? Currently
# on The Device
I already unchecked the Box for Advance network on USB Setting, Finally on The Actvesync connection menu, I checked the box of 'Synchronize all PCS bla bla.... '
# on the Laptop
I have Installed actvesync 4.5.0
When I tried to connect the Device to Laptop using USB Cable, anything Doesnt happen. The Icon of Activesync on Laptop screen did not give response (no flashing showing ).
But The Battery Charging running well as long as the Cable connected.
Maybe there is any procedure that I Have not tried yet.. Please tell me..
Do you have firewall??
Bulldog said:
Do you have firewall??
Click to expand...
Click to collapse
Yup Bro..
I hv the Fire wall in my LT and I Already
disable it,but didnt give any response
sorry becouse i have not given yet the information as below :
My Device has just been format, becouse I cannot access to Windows at the time of Turn on device. Before the windows problem happen, I didnt find a connection failed ( always success evry time physical connection began), but after format the connection problem appears. The LT cannot detect device evry time the cable already plug in to LT.
Please give me more advice.
Highly appreciate for your support
tommyx21 said:
Yup Bro..
I hv the Fire wall in my LT and I Already
disable it,but didnt give any response
sorry becouse i have not given yet the information as below :
My Device has just been format, becouse I cannot access to Windows at the time of Turn on device. Before the windows problem happen, I didnt find a connection failed ( always success evry time physical connection began), but after format the connection problem appears. The LT cannot detect device evry time the cable already plug in to LT.
Please give me more advice.
Highly appreciate for your support
Click to expand...
Click to collapse
tommyx21.. If I did understand you correctly..You had a Windows problem on your Laptop then you reformate it... then your problem with not able to connect your LG to Laptops began isnt???
When you plug in your LG to your Laptop do you see any sign of been connected as USB device? Have you reinstall the ActiveSync.
Bulldog said:
tommyx21.. If I did understand you correctly..You had a Windows problem on your Laptop then you reformate it... then your problem with not able to connect your LG to Laptops began isnt???
When you plug in your LG to your Laptop do you see any sign of been connected as USB device? Have you reinstall the ActiveSync.
Click to expand...
Click to collapse
I Hv format my LGKS20 device, not my LT Boss
for acouple time after format, i can see the sign with the" not recognize" notification (asking for driver). But After that My LGKs20 cannot be detected by LT anymore..
I hv tried to connect my device to PC, but it not given any change too...
I hv already tried to reinstall Actvesync and it given nothing...
any other suggestion boss? or maybe i must try to change my Connection cable with the new one..?
hey guyz,
I am new in the forum. I am having problem in connecting the phone to my PC. whenever i connect it to the usb, it starts charging without any notification asking for connecting through usb or else. how to connect it through my PC?
You need usb drivers installed on your pc...
Typed using a small touchscreen
a.cid said:
You need usb drivers installed on your pc...
Typed using a small touchscreen
Click to expand...
Click to collapse
But windows automatically installs the drivers right? (if not found)
echo104 said:
But windows automatically installs the drivers right? (if not found)
Click to expand...
Click to collapse
No...
It installs drivers if the device already has the same included...
Fit is not plug-and-play, which means you need to install drivers manually...or install kies...
Whichever you prefer...
Typed using a small touchscreen
Dont go for KIES .... !! It's a crap ..
avilove4u said:
Dont go for KIES .... !! It's a crap ..
Click to expand...
Click to collapse
You don't have to use it if you don't want. Installing Kies means you're installing USB drivers, you don't have to start kies everytime when you connect ur phone through usb. I've installed kies but never used it. I use it HIGHLY OCCASIONALLY.
Yup kies is waste of mem (if u ask me ) for drivers go to sammobile website registr n check our phn specific drivers its just around 25mb file dats easy if u dnt want kies
I found it easier to install drivers kies then uninstall kies
Sent from my GT-I9100 using XDA
I have installed the drivers which were given in the thread (http://forum.xda-developers.com/showthread.php?t=1606380) but still it is not recognized by windows 7. it still starts charging. i have tried even toggling the debug mode.
but still no luck. any other option guyz?
thanks in advance.
Install kies then...
Typed using a small touchscreen
Even after installing kies it is still charging. Device is not connected to kies.
hey i am using the usb cable of galaxy ace. is it the problem? but i think these cables can be used on both the devices.
I use the same cable on 2 different blackberry's, my nokia 5310 and c3, samsung monte, and acer liquid metal...
So I don't think that's the problem...
Have you tried using a different computer?
yes i have triedon different computers also.. but its not working there too.
Hi.
I had the problem too. I did this to connect my phone:
1. Go in DownloadMode. Now, the computer must install drivers, like odin.
2. If the installation finished, hold down the Powerbutton for 10 seconds. It'll restart, if nothing happens try to start with holding the powerbutton again.
3. Then, if the phone is started, your computer finds the phone!
I'm not responsible for any damages!!!!
greetings,
TheRealFelix0212
Sent from my GT-S5670 using xda-developers app
USB
Your usb cable is not good man..i had the same experience.Try some other cable.
Install the drivers or Samsung Kies
USB cable
hey i have a usb cable that works with nokia but not with my nexus s.Please try another cable man.
Belive me.
press thanks if this helps...
Hey guys I connected my phone to pc via usb but when i click on the connect button it is just loading and then back to the same screen.
Is it the problem of custom rom as i am having a little problem with that?
Please reply fast.
Reinstall the phone drivers.
Cnc Lss said:
Reinstall the phone drivers.
Click to expand...
Click to collapse
send me some working links
Hello
so any USB connection is not working on my LG 4X on fresh installed stock soft [4.1.2]. On PC i got message ,,failed to install MTP usb device'' etc
Also i dont know how to turn on debbuging mode, maybe this will help? I click 7 times on compilation version and all it do is some jelly on screen (?)
I tested 2 usb cables and all usb ports on my computer what to do now?
I also installed LG PC suite and LG usb drivers from LG site.
Please help guys i need to put some porn on my phone :/
refresh
donaspl said:
Hello
so any USB connection is not working on my LG 4X on fresh installed stock soft [4.1.2]. On PC i got message ,,failed to install MTP usb device'' etc
Also i dont know how to turn on debbuging mode, maybe this will help? I click 7 times on compilation version and all it do is some jelly on screen (?)
I tested 2 usb cables and all usb ports on my computer what to do now?
I also installed LG PC suite and LG usb drivers from LG site.
Please help guys i need to put some porn on my phone :/
Click to expand...
Click to collapse
Download your drivers here
Run the drivers
Reboot pc
For USB debugging check out this guide
Newyork! said:
Download your drivers here
Run the drivers
Reboot pc
For USB debugging check out this guide
Click to expand...
Click to collapse
I did this :/
donaspl said:
I did this :/
Click to expand...
Click to collapse
You have a few options on your phone when you connect the USB cable?
Newyork! said:
You have a few options on your phone when you connect the USB cable?
Click to expand...
Click to collapse
Yep : camera/MTP/pc suite/charging
But still i cant connect to PC by any way, of course charging work but nothing else.
donaspl said:
Yep : camera/MTP/pc suite/charging
But still i cant connect to PC by any way, of course charging work but nothing else.
Click to expand...
Click to collapse
Just to be on the safe side. Have you checked using another computer?
I cant try it on another computer right now :/
I got new cable and still when connect it via MTP i got information from PC suite i dont got this drivers :
http://www.microsoft.com/en-us/download/details.aspx?id=19289
But i cant install them... like i said “this update is not applicable to your computer”
And another info : when im trying to instal MTP drivers via lg pc suite i got error, even if device is disconnected.
Okey so on another computer also on windows 7 x64 usb connection working fine, so what the F... is the problem here?