Hey guys I connected my phone to pc via usb but when i click on the connect button it is just loading and then back to the same screen.
Is it the problem of custom rom as i am having a little problem with that?
Please reply fast.
Reinstall the phone drivers.
Cnc Lss said:
Reinstall the phone drivers.
Click to expand...
Click to collapse
send me some working links
Related
When I start upgrading ROM (Qtek 1.11.00 final) my mini struck at boot loader screen and my PC struck at
"Checking the information from your device...please wait...
Don't disconnect your device from PC or power supply until
the upgrade is completed "
I have strucked at this screen for an hour
what should I do ? Please help me . Thank You
I think you have not disabled the activesync USB connection yet. Do so, and reconnect your mini to your laptop/pc via USB again. then run the installation program again, u should be alright.
tt's what I faced earlier.
zenkinz said:
I think you have not disabled the activesync USB connection yet. Do so, and reconnect your mini to your laptop/pc via USB again. then run the installation program again, u should be alright.
tt's what I faced earlier.
Click to expand...
Click to collapse
I've tried this and I'm still stuck in the opening screen. Any other advice?
Regards,
Rajesh
rajeshr said:
zenkinz said:
I think you have not disabled the activesync USB connection yet. Do so, and reconnect your mini to your laptop/pc via USB again. then run the installation program again, u should be alright.
tt's what I faced earlier.
Click to expand...
Click to collapse
I've tried this and I'm still stuck in the opening screen. Any other advice?
Regards,
Rajesh
Click to expand...
Click to collapse
1. first mini must be in bootloader mode (screen will show serial)
2. disable USB in activesync, plug mini to USB cable (new hardware detection should occur and mini screen will show USB instead)
3. USB cable direct connect to laptop/pc..dun use USB hub..
should work..
Even I had the same problem
Thanks a lot it is solved now 8)
hey guyz,
I am new in the forum. I am having problem in connecting the phone to my PC. whenever i connect it to the usb, it starts charging without any notification asking for connecting through usb or else. how to connect it through my PC?
You need usb drivers installed on your pc...
Typed using a small touchscreen
a.cid said:
You need usb drivers installed on your pc...
Typed using a small touchscreen
Click to expand...
Click to collapse
But windows automatically installs the drivers right? (if not found)
echo104 said:
But windows automatically installs the drivers right? (if not found)
Click to expand...
Click to collapse
No...
It installs drivers if the device already has the same included...
Fit is not plug-and-play, which means you need to install drivers manually...or install kies...
Whichever you prefer...
Typed using a small touchscreen
Dont go for KIES .... !! It's a crap ..
avilove4u said:
Dont go for KIES .... !! It's a crap ..
Click to expand...
Click to collapse
You don't have to use it if you don't want. Installing Kies means you're installing USB drivers, you don't have to start kies everytime when you connect ur phone through usb. I've installed kies but never used it. I use it HIGHLY OCCASIONALLY.
Yup kies is waste of mem (if u ask me ) for drivers go to sammobile website registr n check our phn specific drivers its just around 25mb file dats easy if u dnt want kies
I found it easier to install drivers kies then uninstall kies
Sent from my GT-I9100 using XDA
I have installed the drivers which were given in the thread (http://forum.xda-developers.com/showthread.php?t=1606380) but still it is not recognized by windows 7. it still starts charging. i have tried even toggling the debug mode.
but still no luck. any other option guyz?
thanks in advance.
Install kies then...
Typed using a small touchscreen
Even after installing kies it is still charging. Device is not connected to kies.
hey i am using the usb cable of galaxy ace. is it the problem? but i think these cables can be used on both the devices.
I use the same cable on 2 different blackberry's, my nokia 5310 and c3, samsung monte, and acer liquid metal...
So I don't think that's the problem...
Have you tried using a different computer?
yes i have triedon different computers also.. but its not working there too.
Hi.
I had the problem too. I did this to connect my phone:
1. Go in DownloadMode. Now, the computer must install drivers, like odin.
2. If the installation finished, hold down the Powerbutton for 10 seconds. It'll restart, if nothing happens try to start with holding the powerbutton again.
3. Then, if the phone is started, your computer finds the phone!
I'm not responsible for any damages!!!!
greetings,
TheRealFelix0212
Sent from my GT-S5670 using xda-developers app
USB
Your usb cable is not good man..i had the same experience.Try some other cable.
Install the drivers or Samsung Kies
USB cable
hey i have a usb cable that works with nokia but not with my nexus s.Please try another cable man.
Belive me.
press thanks if this helps...
Hi I have a galaxy fit running on creed's rom 4.0 and i now want to get back to the stock rom.
When i connect my usb cable to pc it just start charging and i cant access sd card and when im in download mode it doesnt show up in the id:com box. please help
Thanks in Advance.
Your PC USB port has malfunctioned. Do it on another PC or laptop(recommended).
Galaxy_Rohit said:
Your PC USB port has malfunctioned. Do it on another PC or laptop(recommended).
Click to expand...
Click to collapse
Tried that too but i had no luck in that!
Install Samsung Mobile Drivers on PC.
Galaxy_Rohit said:
Install Samsung Mobile Drivers on PC.
Click to expand...
Click to collapse
They are installed already. Is there any way of configuring usb settings in the phone except usb debugging?
Hi xda, I need some help here on my lenovo A850.
Whenever I plugged it to my pc, it don't pop up any usb connection option and my pc didn't even detect it.
I can't use flashtool since pc didn't detect my phone.
What should I do?
I've rooted it using framaroot and installed cwm using mtk uncle.
Should I just try and flash other rom via cwm?
Really appreciate any help from anyone here.
Have a nice day.
balachis said:
Hi xda, I need some help here on my lenovo A850.
Whenever I plugged it to my pc, it don't pop up any usb connection option and my pc didn't even detect it.
I can't use flashtool since pc didn't detect my phone.
What should I do?
I've rooted it using framaroot and installed cwm using mtk uncle.
Should I just try and flash other rom via cwm?
Really appreciate any help from anyone here.
Have a nice day.
Click to expand...
Click to collapse
Do you hear the windows sounds of connecting / disconnecting devices? If not, your cable must not working...
Else, try installing the USB drivers from here.
You can install roms from CWM BUT if anything goes wrong, flash tool can almost always fix it.
So i advice you, before installing anything make sure that your phone can connect to flash tool.
GreatApo said:
Do you hear the windows sounds of connecting / disconnecting devices? If not, your cable must not working...
Else, try installing the USB drivers from here.
You can install roms from CWM BUT if anything goes wrong, flash tool can almost always fix it.
So i advice you, before installing anything make sure that your phone can connect to flash tool.
Click to expand...
Click to collapse
Nope nothing from my pc and nothing from phone. Even flashtool can't detect it. I'm on win 7 32 bit
balachis said:
Nope nothing from my pc and nothing from phone. Even flashtool can't detect it. I'm on win 7 32 bit
Click to expand...
Click to collapse
Do not expect to connect to flashtool if it doesn't connect to your PC.
From what you are saying it seems to me that the cable or the phone or the USB port has problem.
Try these: (until you hear a windows sound or see the phone charging)
- Try an other USB port
- Try on an other PC
- Try an other cable
- Try mounting from Recovery?
You can also try installing the USB drivers from the link i gave you in my previous post...
GreatApo said:
Do not expect to connect to flashtool if it doesn't connect to your PC.
From what you are saying it seems to me that the cable or the phone or the USB port has problem.
Try these: (until you hear a windows sound or see the phone charging)
- Try an other USB port
- Try on an other PC
- Try an other cable
- Try mounting from Recovery?
You can also try installing the USB drivers from the link i gave you in my previous post...
Click to expand...
Click to collapse
Sent my phone to repair its usb..lolz
Thanks guys.. Really appreciate it..
I'll be hanging around in xda lenovo development forum..
Gotta learn some rom flashing methods..
GreatApo said:
Do not expect to connect to flashtool if it doesn't connect to your PC.
From what you are saying it seems to me that the cable or the phone or the USB port has problem.
Try these: (until you hear a windows sound or see the phone charging)
- Try an other USB port
- Try on an other PC
- Try an other cable
- Try mounting from Recovery?
You can also try installing the USB drivers from the link i gave you in my previous post...
Click to expand...
Click to collapse
please gan , my problem is the same , it can be for the charger , but can not connect pc then, no noise at all in the pc , I've tried to move pc , replace the cable usb.
Hello
so any USB connection is not working on my LG 4X on fresh installed stock soft [4.1.2]. On PC i got message ,,failed to install MTP usb device'' etc
Also i dont know how to turn on debbuging mode, maybe this will help? I click 7 times on compilation version and all it do is some jelly on screen (?)
I tested 2 usb cables and all usb ports on my computer what to do now?
I also installed LG PC suite and LG usb drivers from LG site.
Please help guys i need to put some porn on my phone :/
refresh
donaspl said:
Hello
so any USB connection is not working on my LG 4X on fresh installed stock soft [4.1.2]. On PC i got message ,,failed to install MTP usb device'' etc
Also i dont know how to turn on debbuging mode, maybe this will help? I click 7 times on compilation version and all it do is some jelly on screen (?)
I tested 2 usb cables and all usb ports on my computer what to do now?
I also installed LG PC suite and LG usb drivers from LG site.
Please help guys i need to put some porn on my phone :/
Click to expand...
Click to collapse
Download your drivers here
Run the drivers
Reboot pc
For USB debugging check out this guide
Newyork! said:
Download your drivers here
Run the drivers
Reboot pc
For USB debugging check out this guide
Click to expand...
Click to collapse
I did this :/
donaspl said:
I did this :/
Click to expand...
Click to collapse
You have a few options on your phone when you connect the USB cable?
Newyork! said:
You have a few options on your phone when you connect the USB cable?
Click to expand...
Click to collapse
Yep : camera/MTP/pc suite/charging
But still i cant connect to PC by any way, of course charging work but nothing else.
donaspl said:
Yep : camera/MTP/pc suite/charging
But still i cant connect to PC by any way, of course charging work but nothing else.
Click to expand...
Click to collapse
Just to be on the safe side. Have you checked using another computer?
I cant try it on another computer right now :/
I got new cable and still when connect it via MTP i got information from PC suite i dont got this drivers :
http://www.microsoft.com/en-us/download/details.aspx?id=19289
But i cant install them... like i said “this update is not applicable to your computer”
And another info : when im trying to instal MTP drivers via lg pc suite i got error, even if device is disconnected.
Okey so on another computer also on windows 7 x64 usb connection working fine, so what the F... is the problem here?