Related
Morning / Afternoon / Evening to All,
Not to be critical of this wonderful website which is full of great resources but, I have noticed that the useful info is hard to find.
So I thought it might be a good idea to post all of my items in the one place so here goes.
I will update these as i go.
TIP
If you want the CAB Files in remain in your PPC after install simply change the files preferences to "Read Only"
since i was just upgrade from wallaby to magician, i found all your posting, instructions and cab files very very helpful thanks a lot ampda, you rules :!:
Hello ampda , Great Work Friend . . . many thanx for these cabs and instruction files.
Cheers for taking the time to make them for the rest of us noobs
Glad to Help
verry nice indeed but there are simpler ways of doing the discribed below
(copied this out of pdf file )
3. Copying your “Extended ROM” Files before Big Storage
You need to copy the files from your “Extended ROM” before you go the Big Storage as you will need to install some of them after you’re finished, i.e. MMS etc. They will be deleted after the upgrade (and that’s the whole point).
a. To copy them from your Magician do a hard reset (push the power button and reset button at the same time).
b. Go through the screen alignment, time zone etc and get ready…….. when you reach the “Completed” screen it will ask you to “Tap your screen…. As soon as you tap the screen you get 3 sec to soft reset (push the reset button). If you miss it as I did just do a hard reset and try again.
c. After you do b. above go to the built in file explorer and under “My Device” you will now see the treasured “Extended_ROM” with all its files. Copy the directory straight to your SD Card then to your PC, keep them safe.
its just a bit easyer when you just fill in
go to windows folder on PPC and search loadvdisk.exe
run it and you will see your ext_rom (until you reset )
not to sure the usual file explorer can do this but Resco file explorer will find it
another progie that can find it is total commander :
find it here
http://www.ghisler.com/pocketpc.htm
no offence ment by this
Logos for Qtec, i-mate...
http://www.npo-hors.ru/logoqtek/logoqteks100.rar
Hi!!
Thanks for all your help!
Does anyone konw, or is there a way to save to the pc the SMS messages both received and sent??
Cheers!
use jeyo mobile companion. u can backup all of your messages, contacts (phone and sim), etc.
Hi!
Thanks for the tip!
By the way, and i think these questions are more tricky, is there any way NOT to charge the battery while the phone is connected to the USB?
And while using the calling software, when inputing the nunbers, to make the sim card entries dissapear and only have the ones that are in the contacts? Because most of the times i have a double entry and it really makes me mad!
Thanks!
The way to NOT to charge the battarie is to make some changes to your cable - cut +5v from USB (or make a switch).
the tray launch only app.... theres now way to BROWSE for the program you want on the tray?
sucks that you have to type out the entire path just to get it
Any idea whether these (or more specifically the camera speckles change) will work on a Wizard?
Remove Camera
Noob question here.
Once i install the camera & album to Storage how do i delete it from the \windows . Maybe not possible due to it being in ROM. In this case I end up with 2 camera software? So i'm curious what is the idea of installing in storage.
Halo ampda, i tryin to follow your how_to_ppc_upgrade.pdf buat I stuck in the step 4 backing up your existing rom to PC, in romupdate.exe I still confuse about the PORT things. can you help me to, which one to use?
please help...
thanks
Thanks for nice posting AMPDA..
I have a question,
I installed ampda_CameraV2.7b21026_RAM.CAB
but my camera version was 2.70 (build 18727) and it is still the same. I reset the device but still didnt become build 2026.
Do you have an idea?
regards
Guys,
This sharing is really useful. I just bought mine few days ago from ebay. Mine doesn't come with ANY EXT ROM at all! No software such MMS, smart dial etc.
Can anyone provide a link to get back those basic EXT ROM software so that I can upload it back? ftp://ftp.xda-developers.com/ is not working for me. Any help pls?
Pillow...
Pillow write your email address. I'll send you them via email. (Those which are not device spesific).
What is the type of your device and rom versions?
smellypillow said:
Guys,
This sharing is really useful. I just bought mine few days ago from ebay. Mine doesn't come with ANY EXT ROM at all! No software such MMS, smart dial etc.
Can anyone provide a link to get back those basic EXT ROM software so that I can upload it back? ftp://ftp.xda-developers.com/ is not working for me. Any help pls?
Pillow...
Click to expand...
Click to collapse
Hi Lupusic,
Thanks a lot for your kind offer. I manage to pull up the files from the FTP using cuteFTP software. Some how my company laptop doesn't allow default browser connection....
My phone is O2 mini and has v.1.13 for both rom & radio. I think it's BigStorage (not sure though).
Any good advice for me? I mean anything at all....
Thx again
Pillow....
Guys, I'm not able to run Boot Image Tool. It gives me this error
Component 'mscomctl.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
Any idea?
Thx....
Hi AMPDA,
Thanks for all your postings on big storage which gives detailed instructions step-by-step. Very brief and consise. Also now I notice you have put everything into 1 place like a table for pick and choose. Can it get any better ? Can't ask for anything more. You have so many useful cabs and instructions. I have benefitte a great deal. ONCE AGAIN Thank You.
Let me just begin by saying that you all are awesome. I am incredibly impressed you were able to get WM6 working on the Tornado. I have a TMobile SDA (USA). I used Andot's Perfect WM6 ROM to flash. I didn't have any problems other than a few spontaneous reboots after flashing the ROM. I do have a question though.
After flashing, I now cant get my T-Mobile button nor my review, play, and forward buttons(the ones that are on the same row) to work. I would like them to work with media player like they used to. I could give a rat's ass about the T-Mobile button, but it would be nice to be able to assign it or any of those other buttons to a specific function.
Is there a specific customization CAB I was supposed to install for the TMobile SDA (USA) to get those buttons working? How can I use or reassign those buttons?
Thanks in advance for your help!
Hello atarilynx,
I have your same phone, which is also identical to the sp5m.
go get phil's extras.zip from
http://forum.xda-developers.com/showpost.php?p=1417372&postcount=4
and install the sp5m button fix cab
after that, you can to into wmp and assign the buttons to do their normal tasks.
also, after applying that fix, the t-zones button will open to an ie search page.
Many thanks...
Thanks a bunch...that works for me. You all rock!
Maybe one other question...when I imaged my phone, after it was done, it would reset about every few minutes. Sometimes I would try opening stuff, and it would seem to lock up, then reset.
Things seem to be ok now... I have not had it reset on me once after the first few hours. Did others have that experience too?
Neither of the phones that I've flashed have had that problem.
Both of them being TMob SDAs.
I have no clue why your phone was doing that, hope it got that out of it's system!
actually if you guys notice, it still doesnt work. you will try and configure the fastforward button, but when you try to hold it down, it only sees it as a press, not a hold.
true, the hold and seek feature is lost from those buttons, but you can still do that with the joystick if you must.
I personally have no problem with that as I hardly seek through songs.
something else is still tweaked though, on one of my sda's, i did the button fix then installed the tcpmp shortcuts from mobile.surrealnetworks.com/SDAapps.htm
now the buttons do not line up at all with what they are supposed to do. I think the "previous track" button becomes the play button and whatnot.
maybe phil can come up with a better sp5m fix
or, you know, someone else who actually knows what's going on.
I need to sit down some evening and really dig in and figure out what exactly these fix cabs are doing.
I think you need to find the attribute for WMplayer which is used for seeking forward or backward, then save it as Long_AP#.lnk where # is the button number
karhoe said:
I think you need to find the attribute for WMplayer which is used for seeking forward or backward, then save it as Long_AP#.lnk where # is the button number
Click to expand...
Click to collapse
In the past, I have had poor luck with assigning a Long_AP command when there wasn't one already set for that button. Not sure if something needs to be added to the registry as well?
Otherwise, I would set long buttons for all sorts of apps :-/
Like, in Andot's rom, I love having the long home go to celetask.
Same, I tried to assign an attribute to long_ap, it did not work, why dont you copy the lnk files from AKU2 ROm ?
That is probably a good suggestion, tho, I still think there is probably more to it . . . I would try it out, but I'm moving in a couple days, and have priorities that must be attended to :-(
i think it has something to do with htcwmpplugin.dll, plus maybe sumthing to do with this registry i found it when i dumped the tmobile rom... and checked the rgu files
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\UIPlugins\{72F3E437-17E6-484E-9C96-13181D4039CB}]
"FriendlyName"="HTC Key Mapping UI Plug-in"
"Description"="HTC Key Mapping UI Plug-in"
"Capabilities"=dword:1
i havent tried most ,too lazy!!! hehehe!
as it has been explained in many posts in the past the htcwmpui plugin is for a homescreen wmp plugin and nothing to do with the buttons
oh ok sorry about that... will it have to do with keybddr.dll then?
What are you guys talking about "assigning attributes" to the long_ap#.lnk?
Are you talking about adding in a command line style switch to change the way the intended application will handle the shortcut?
actualy, i have followed these and othere forums for quite some time and i have yet to see if anyone has figured out how to get the media buttons working on roms were that feature does not come by default
Exitao said:
What are you guys talking about "assigning attributes" to the long_ap#.lnk?
Are you talking about adding in a command line style switch to change the way the intended application will handle the shortcut?
Click to expand...
Click to collapse
Its not attribute, its parameter/arguments
Yes ! thats what we are talking about
I have created a cab file for the same. but the problem of using the htcwmpplugin is that the keys are mapped differently. the internet explorer key is mapped to the previous button and the play key becomes the previous key.. which is a problem.. that's why i want to know which keypad drivers are being used. The keypad drivers used for tornado music or imate sp5m is a little bit different.
Try using it..
http://forum.xda-developers.com/attachment.php?attachmentid=45775&d=1186047418]
i think i got it... i dumpeed the t-mobile rom took the keybddr.dll folder and incorporated it into andots ppe v6. i also removed the keybddr.dll had in it...
after building it...
i then i copied the sp5m zip files (those short_ap1-4 .lnks) to my windows folder, installed the cab tejasphatak gave here... then it all worked...
the keybddr.dll folder
here is the file incase you guys want it...
iron1 said:
here is the file incase you guys want it...
Click to expand...
Click to collapse
i copied the files, then installed the cab, but it's still as if i only installed the cab. the back/reverse buttons works as play and hte play button works as forward and etc...
small hint for mem maxxing madmen:
camera driver on/off trick(i got almost 38 mb mem with my rom without cam driver):
find something like that(just rgu part related to camera and cameradriver) in \sys rgu:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Camera]
"Dll" = "OV9650.Dll"
"Prefix" = "CAM"
"Index" = dword:1
"OperatorCode" = dword:0
"CameraKeyPosition" = dword:0
"SensorType" = dword:0
"Order"=dword:3
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}" ; GUID for generic power-manageable devices.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CameraDriver]
"Prefix"="CAP"
"Dll"="CameraDriver.dll"
"Order"=dword:10
"Index"=dword:1
make cab with these, then remove from kitchen rgu's,
add cab into autorun process.
cook, flash.
then, uninstalling cab and soft reset will give you more mem(2.5 - 3mb),
installing cab and SR will activate cam again.
it WONT work, if that reg is already in ROM.
(i do not know if any cab can remove reg entries, if so, simplier method(no cooking) would need 2 cabs).
cheerz.
while ur at it...
im looking for a while now for a way to turn on/off the built-in flashlight
there seems to be no answer anywhere ..
there must be a registry setting for the light itself somewhere
or at least a device node and/or driver..
or its connected to the cam module and this driver from cam can only do it..
can you perhaps shine a light on this ?
da_jojo said:
while ur at it...
im looking for a while now for a way to turn on/off the built-in flashlight
there seems to be no answer anywhere ..
there must be a registry setting for the light itself somewhere
or at least a device node and/or driver..
or its connected to the cam module and this driver from cam can only do it..
can you perhaps shine a light on this ?
Click to expand...
Click to collapse
upd: i cannot help..it may be inside cam driver...so it cannot be done, as cam or below tricks.
----------------
make an experiment:
launch task manager 2.7.
go to "devices" tab.
now, find BKL1:
hold stylus on name, then click "stop"
now, check kbd(AND phone buttons)....
BUT, you will lose "turn off backlight" timings too...did not check if "turnoff device, if not used..." timing, but possible, that it is gone too.
no.. no.. no..
i mean the flashlight next to the camera on the back of the wizard
not ze backlight lol
yup these lights in the buttons are annoying too
i looked in the registry and everywhere on the internet but cant find to
much of info about this.
there is a prog called VJCandela but it doesnt work on the wizard :/
i mailed the author and send him PM and more but he doesnt answer
and as far as i know there is no program that can turn on the light of the
camera..
it must have a hardware adress or a registrysetting or something like that
maybe its mapped through the camera device on the wizard , i donno
but i really need to know as i use the flashlight very often and hate it
to start the cam app and press this lightning-bolt everytime..
i just want it mapped to a button
yeah, i took it wrong lol..
i think it is driver function, so..it may be hard to override it..
i will give you a word, if i find anything.
lol
cheers mate
now all we have to do is strip the camera app untill there is only this lightning bolt switch left ^^
Just want to double check...
Looking in your !driverkamery.cab, there's also an "IClass" key in [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CameraDriver]. Or more specifically, "IClass"="{CB998A05-122C-4166-846A-933E4D7E3C86}"
Do I remove this too?
Should I also remove the [HKEY_LOCAL_MACHINE\Software\Microsoft\DirectX\DirectShow\Capture] settings? Namely:
"Prefix"="PIN"
"Dll"="CameraDriver.dll"
"Order"=dword:00000011
"Index"=dword:00000001
"IClass"="{C9D092D6-827A-45E2-8144-DE1982BFC3A8}"
it is not important, you may remove or leave it..imo.
btw, i made some experiments, and i see, that same method may be used to on/off trick for ircomm and error reporting devices.
(more free mem, no side effects).
Please give more details and cabs to reinstall them.
Thanks
nothin said:
it is not important, you may remove or leave it..imo.
btw, i made some experiments, and i see, that same method may be used to on/off trick for ircomm and error reporting devices.
(more free mem, no side effects).
Click to expand...
Click to collapse
ok, i will post cabs and reg to remove(before you will install on/off cabs) ircomm, serialirda, error reporting.
link: soon.
Nothin,
Really interesting trick!
With all respect I have for ya, I made the cabs. I haven't tested yet...I'm doing right away..but I guess it will work just fine. The cabs only contains those reg keys as you pointed out above.
Rgs
OK...
I tested these 2 cabs I have posted and both are working fine at least on my Wizard! I got 30.21Mb free after have done the Nothins' trick! Really nice! See Attachment.
But as he said, you need reinstall both cabs to have you CAM working back properly! That's the bad side. That will be cool if it would be possible to have the CAM function without having to uninstall and install those cabs!
Anyway, that's the beginning....
Nothin,
I'm a bit confused...
I was actually thinking over and I still haven't had a clue regarding the ON/OFF trick. I mean, if you have to install back the cabs to have CAM working fine all the time you need it, why should we use it? But if you did this trick succesfully as you mention on Paradox 4, what else Am I missing?
I got the extra room but no camera. To use the cam, I had to install the cabs! That's not the deal!
I'm probably doing something wrong or left a step behind...Just clear deeply this process!
Thanks man.
this is simple..
you may have memory OR camera..
i think, that whole microsoft way of thinking is making OTHER way impossible.
this is so simple....
you cannot make driver/device activated without softreset.
this is NOT hotswap..
so, on system that have removed cam reg entries is a must to install cab and make SR to get it working, uninstallation removes reg entries, and system start will not have cam at all.
sorry, cannot explain it simplier.
there are NO miracles.
btw, there will be no paradox anymore, and please, do not make any comments 'bout it.
hello everyone, long time member of howardforums and just joined xda and find some very usefull info, thank you all. i ran into a small problem last night. i have a tilt , not flashed but i have installed the htc home screen and everything worked great. last night i tryed to install the touchflo program found in a few places in this forum and it didn't work but thats when the interesting stuff happen....after deleting all touchflo cab files and restarting the tilt every time at startup it gives me a warning " FTouchFlo.exe cannot be open, its either not signed with a trusted certificate or one of its components can not be found. try reinstalling or restoring file." ????? and now the icon that used to be under the clock for favorite people that would send me their pics so i can just one touch dial is GONE? tryed installing the cab for the htc homescreen again but the same....there is a music short cut that lets me launch the music player that wasn't there before? i downloaded the htc home plugin customisor and even when i set for 6 icons on the bottom of the clock it still just gives me 5?
at the end of the day i would like to have the touchflo program but its not a big deal if i dont, i would however really like to have the pic dialer back on my screen as its really convinient to dial my fav people with it.thanks in advance
try this for the favorite people tab
http://forum.xda-developers.com/showthread.php?p=1614132&highlight=favorite+people#post1614132
To get the favorite people tab back, delete this key:
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
i'm asuming this is what you meant? sorry but where do i find this key? thanks
bobcho10 said:
To get the favorite people tab back, delete this key:
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
i'm asuming this is what you meant? sorry but where do i find this key? thanks
Click to expand...
Click to collapse
Keys are in the registry. To access and change the registry you need a registry viewer/editor. There are many but for simple "everyday" use this is a good one:
http://www.phm.lu/Products/PocketPC/RegEdit/
Be careful though delete the wrong things and you'll end up needing a hard reset.
Mike
mikechannon said:
Keys are in the registry. To access and change the registry you need a registry viewer/editor. There are many but for simple "everyday" use this is a good one:
http://www.phm.lu/Products/PocketPC/RegEdit/
Be careful though delete the wrong things and you'll end up needing a hard reset.
Mike
Click to expand...
Click to collapse
thanks mike, sorry for the noob question but what do i do once i install this on my comp ? do i install on the phone as well and run the program or ? .....
bobcho10 said:
thanks mike, sorry for the noob question but what do i do once i install this on my comp ? do i install on the phone as well and run the program or ? .....
Click to expand...
Click to collapse
PHM downloads as a .MSI windows installer. So it will not install properly unless you have your device connected via active sync when you run the downloaded file. So connect your device via usb cable. Let active sync connect and update. Then while still connected run the installer download. During the process a message will pop up on your device. If a choice is offered it will be ok to install to storage card if you have one.
Cheers for now.
Mike
thanks guys , can anyone tell me how to delete .exe files? i still get warnings at start up that touchflo.exe and bio-something-.exe can not run because some files are missing.....thanks
I have yet to see it posted so heres how to skip the MEGA BLOAT on the fuze.ATT tried VERY hard to prevent it this time around.
I have tried every screen from hard reset. From what Ive found this is the only way to do it.
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen(use your finger and have your stylus ready by the reset hole) hit the stylus reset. (if you see customization start your too late and must start over)(hard reset by holding volumedown and the button in the center of the scroll wheel while pressing the stylus reset)
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
10.run the Opera cab called WM6_PPC_HTC_Opera9_WWE.cab (only WM6_PPC_HT… shows up in File Explorer) or you won't have the Opera browser.
You now have no bloat and TF3D
You must also install the opera cab in windows for the internet tab to work.
but does everything work?
i found on my hermes that certain stuff didnt work properly if i went about it that way
lbhocky19 said:
but does everything work?
i found on my hermes that certain stuff didnt work properly if i went about it that way
Click to expand...
Click to collapse
So far yes
Ive been testing for an hour. All the cabs from customization are posted in the windows folder. T
he only thing you lose i see so far are the folders in programs. For all the bloat Ill gladly recreate some folders.
so this is supposed to get rid of the At&t tab in touchflo 3d??
because i did it an the tab is still there...or what exactly does it do?? 9IM A NOOB!!)
aruppenthal said:
I have yet to see it posted so heres how to skip the MEGA BLOAT on the fuze.ATT tried VERY hard to prevent it this time around.
I have tried every screen from hard reset. From what Ive found this is the only way to do it.
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen hit the stylus reset.
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
You now have no bloat and TF3D
Click to expand...
Click to collapse
If you have yet to see it posted, then how did you copy and paste it word for word from the thread that it's already posted in? Cute...
but everything else is loaded like MS voice command, the quickgps,etc?
any idea where I can find the tools that was under programs with att configured?
need to use the proxy thing
Nevermind I found them there in the windows folder
what/where is the "stylus reset"?
KevinACrider said:
If you have yet to see it posted, then how did you copy and paste it word for word from the thread that it's already posted in? Cute...
Click to expand...
Click to collapse
The thread with it in it word for word is a copy and paste from this thread.
In fact I am even quoted in it
Thanks though might wanna read before posting negative comments.
starstreak said:
but everything else is loaded like MS voice command, the quickgps,etc?
Click to expand...
Click to collapse
As far as I can tell we are getting everything else except the stuff you dont want by skipping customization.
If you want stock and know how to flash NATF's rom is a good alternative. He has done a good job of removing the junk permanantly. From what I have read his rom is pretty solid.
I will probably continue my tilt line of ROMs on the fuze soon. I always base mine off of ATT's most current roms and leave all ATT settings intact.
Does anyone know the name of the CAB for Opera in the windows folder? It does not start off as Opera. Thanks...
UPDATE: Found it.
Raspster said:
Does anyone know the name of the CAB for Opera in the windows folder? It does not start off as Opera. Thanks...
UPDATE: Found it.
Click to expand...
Click to collapse
Opera doesn't load if you skip the bloat. What is the cab called? I couldn't find it and ended up finding a newer version on this board and used that cab, but I would still like to know. It was driving me crazy.
jglev said:
Opera doesn't load if you skip the bloat. What is the cab called? I couldn't find it and ended up finding a newer version on this board and used that cab, but I would still like to know. It was driving me crazy.
Click to expand...
Click to collapse
It is called WM6_PPC_HTC_Opera9_WWE.cab. All you see in file explorer is "WM6_PPC_HT..." so it's impossible to tell what it is without running it. I installed Total Commander to find it.
southG said:
what/where is the "stylus reset"?
Click to expand...
Click to collapse
The reset is a small button on the bottom of the Fuze, to the right of the usb port underneath the headphones symbol.
Beat me to it... Yea, The title is too long and you don't see the opera part. WOW, what a difference when you follow theses steps. It even puts the YouTube app on the internet TAB. The fuze runs ALOT smoother and has WAY more RAM/ROM. Good find!
do I press reset when I touch the screen, or the moment I see something change on the screen from me touching it?
WHen it starts up, am I supposed to see a customization wizard? Or did I fail?
edit: failed.crap
starstreak said:
do I press reset when I touch the screen, or the moment I see something change on the screen from me touching it?
WHen it starts up, am I supposed to see a customization wizard? Or did I fail?
edit: failed.crap
Click to expand...
Click to collapse
Yeah the second you see the screen change you have to reset. Once you see the wizard you went too far. If you see it hard reset and try again.
Thanks for this info. I tried flashing some of the ROMs specifically the NATF ROM since I wanted to keep the AT&T theme but not some of the AT&T bloatware but one thing I noticed accross the board is that cellular video does not work. I have checked proxy and connection settings and managed to get MEdia Net to work but CV always fails. Opera states the fuze is not a 3G phone and PIE only shows XML codes. Alhtough I don't use CV much I still wouldn't want it broken. I suppose this is my alternative for now.
Ahhh, I love the internet and being able to find the answer to any question you might have haha. Thanks for the tip on Opera, I was definitely missing that.
About the only thing I can think of that was kinda cool from the AT&T pack was the Cellular Video. Can that be installed by itself?
Racenut said:
Ahhh, I love the internet and being able to find the answer to any question you might have haha. Thanks for the tip on Opera, I was definitely missing that.
About the only thing I can think of that was kinda cool from the AT&T pack was the Cellular Video. Can that be installed by itself?
Click to expand...
Click to collapse
Cellular Video is only a website and can be access through cellularvideo.cingular.com
Theres something called PT_BlackSCR.cab
I installed that too. Err..what was it? I'm guessing it was the ATT_tabbed TODAY theme? I forgot to check if that was there before I installed it.