hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
T-mobile MDA compact 2.
Tried to flash to WM6. Unfortunately used wrong rom. ( I was naive about the process then !)
When trying to start the unit intermittent faint flashes on screen while trying to reboot itself. It contines this way until the battery dies.
Activesync Cant Detect The Unit anymore
How can i recover and get WM5 back on this unit. ?
How do you get into boot loader mode on this device ?
Can Somebody help me by giving step by step instructions on recovery.
All Help will be greatly appreciated...
Thanks
Aheron147..
Hi, i have search the formu an the web and didn't find an answer to my problem, so i'm desperate. I hope someone can help me with my problem:
I have flashed android built on nand, but after a while the touch screen has didn't work no more, so i tried to get back my windows rom back. Now can't enter in the tricolor bootloader screen to flesh windows RUU. I have tried all the buttons too with soft reset but nothing works. I tried to remove battery then soft reset with camera pressed, also not working.
If anyone knows how, please help me...
Thanks in advance...
and excuse my english
this has happened to me also, have you found a fix?
thanks
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
phone help
dnchandana said:
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
Click to expand...
Click to collapse
It is very hard to understand what your exact problem is, I can suggest a Galaxy III for an upgrade. As far as your current phone...
I;m sure someone out there has had a problem close to yours, try YouTube and Google searching as well as educating yourself here (XDA) on anything related to your phone or similar problems.
You might find the info. you need in an unrelated post or video! Check your pins to see if they are worn or possibly broken (connections). Ensure that you are getting a clean and solid connection.
Good luck
Hi I need your help. I am a owner of hummer h5 mtk6572 phone
I have a very strange problem. My phone freeze after that I can't do anything
I pull out the battery and insert it again but my phone is death
No power no screen. After that I flash it with spflash tool, the phone boot up
After some hours the phone freeze again. I have no other choice I flash it again
I have try all different firmware and stock too I have same problem
Can anyone help of to find the problem and solve it thanks
May be these problems comes from hardware...
@sokolataki, sounds to me like a very faulty device. Ask for a replacement if you still can; otherwise, just get a new phone.