I upgraded our first SPVM1000 (xda2 from orange) with WM5 and it all seemed to work fine.
I then up upgraded the second and it went fine. The second one is still workign completely fine with no problems. We noticed that the first one could not get reception. If you put its sim card in the other phone then it works. Now I tried with with Orange and Vodafone sims. They work in PDA 2 but in PDA 1 there is no reception (it was working yesterday).
Then it kept coming up with an error saying that it was sorry for the inconvenience but there was an error with cprog.exe.
After a reset (power button and soft reset button) that stopped happening but then I found that I could not active sync PDA1. It cant connect and so connects as "guest". After what used to be a hard reset, everything is still as though I just did a soft reset with WM5 - not sure why.
Then I tries to backdate it to the old rom. If I use OSImage tool it wants it to be active synced which doesn't work (v3.8 or v4.0). I also tried to reupgrade with WM5 again (a fresh installation) but althoght it will go into boot mode with Serial 1.03 and then USB 1.03 appearing on the screen, the upgrade fails. It says there is a communication error.
Everything is working with PDA 2 so it cant be a connection fault. I think I did something and now I got myself in quite a pickle.
Can anyone help please?
I'd be happy to reset / reboot right back to the beginning again though I'd like to keep WM5.
Thanks
Anthony
Solution (how to hard reset in wimdows mobile 5)
Hard resetting WM5 has fixed all of these problems including the phone reception. To hard reset (sometimes called clear reset in the forums) you have to press the tape and camera buttons and then the soft reset with the stylus. This is on an XDA2 (SPVM1000) and is different since upgrading to WM5 (prev power button and the soft reset did the trick). I found lots of websites giving different instructions on how to do this but for the XDA2 type this works.
Ant
)
Hi
I am having turabul whit my mda vario 2
3 months a go I got the phone from t mobile is been came whit the windows mobile5 and I install the windows mobile 6 but I am having turabul whit it and I when to go back to windows mobile5 now I call the T-Mobile customer service they cudont help me and refer me to manufacture to solve the problem.
I tray to install the window mobile5 but is giving me turabull code 224 devise is not responding I tray to dart resetting is well but instil is running on window mobile 6.
Can you pls help me to install the window mobile5, or have to delete the rom update.
Hey Bro, you're knocking on the wrong door, this is the "Himalaya" forum you need to check out the "Wizard" Forums next door
Reply Deleted
Hello, i bought the Cruise yesterday, it`s the UK version with the following rom: 1.25.405.1 WWE, 12/11/07, protocol version 25.65.30.04H.
i have a problem with the today screen, i don`t see the tabs and the weather, neither the big clock as usually one has on the htc today screen. i tried to change it from setting my "today" but nothing change i still have this quite empty screen . Could you please help me, this is my first smartphone and i am a newbie.
Go to Settings/Today/Items and see HTC home is checked or not...
I had the same problem right out of the box. I did a hard reset and that fixed it.
i also solved the problem. I just did an hard reset and now it works properly. Thanks anyway for your help
After I tried to upgrade the rom to WM6, my JAMin got stuck at bootloader. After that, I tried to flash WM5 roms without success and suddenly (after a reset) the screen became white with some horizontal and vertical lines constantly moving. I discovered that it was only the screen that was garbled as it still connected to PC, so I installed (without seeing anything on my JAMin) the NVID ROM trying to restore it. It installed sucessfully, but the screen remained garbled with the white background and random lines. I know it was sucessfully installed because I heard the typical "welcome" sound before configuration.
Do you know any way to restore the screen? Or must I send it to I-Mate to repair?
You can try and reattach the screen cable to the rest of the device, but this will boid any warranty you have, and may damage your device further. If the device is under warranty, I would suggest flashing the ROM the device came with (unfortunately the FTP server is down at the moment, so it might take some fishing around for) and sending the device back to get repaired properly.
mpmf said:
After I tried to upgrade the rom to WM6, my JAMin got stuck at bootloader. After that, I tried to flash WM5 roms without success and suddenly (after a reset) the screen became white with some horizontal and vertical lines constantly moving. I discovered that it was only the screen that was garbled as it still connected to PC, so I installed (without seeing anything on my JAMin) the NVID ROM trying to restore it. It installed sucessfully, but the screen remained garbled with the white background and random lines. I know it was sucessfully installed because I heard the typical "welcome" sound before configuration.
Do you know any way to restore the screen? Or must I send it to I-Mate to repair?
Click to expand...
Click to collapse
Hi frd,
I have exactly the same problem!
Nothing , only the f*** white screen!
I can browse the device via active sync, can rcv calls but the white screen.
I have checked the ribbon connector of the LCD and make reflashing some ROMs but nothing.
I still wondering is it hardware or software problem!
Please let me know if you have progress!
Thanks
G.
Try to replace LCD module, I think thats right way.
It will be a hard ware problem. Probably the ribbon cable as the screen is showing something so it must be working at least a bit.
Hello,
i have the same Problem with my QTEK S200.
First i changed the Rom and it worked perfectly for two days.
Then i had to change my Sim card and after that the problem came again.
I tryed a lot of times to reflash the rom but the problem persist.
How can it be that it worked again for some days ?!
is it the touchscreen of the lcd unit i have to replace ?
is it possible to do it by my self ?
thanks for your help !
Hi everyone.
I had a similar problem an hour ago (Qtek S200 G3):
I Upgraded to a 6.1 rom and then to another, after that my device was stuck in bootloader(3 colour screen). Any 6.1 rom that I tried would install, but after installation device always boot in to the 3 colour screen.
I tried this original shipped rom http://files.mail.ru/HZUAH1 (it's WorldWidwEnglish) (to download just click the link "скачать" or the file name RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
) and it installed!!! It TAKES A WHILE TO INSTALL!!! But it worked!!!
May want to try it.
Hope this helps.
hello,
picture on screen was immediatly clean again ( bootload image ).
it was impossible to change the rom because i have a G4 model.
i flashed the rom with another french rom for G4 and it worked perfekt.
now i tried to remove the battery again for 3 seconds and now i have the same problem again. really strange ....
i tryed the same procedure again but no success.
I reinstalled differents rom's again starting always installation from bootloader.
After about 10 new installations i've clean picture again.
now i'll not put off, restart, or take of battery till one of you know what's the problem.
Thank you for your help !!
are you guys sure its not an intermitant hardware problem, it sounds like it to me. if yu were able to get a clean picture for a short time and now its white again, it cannot be the rom? As for replacing it, nothing is impossible and there is always ebay and google
QTEK S200 G4 CID unlock
How can I CID unlock a device that need´s that to upgrade the Rom?
Is there already any program that , Lockwiz dont do the job, can performe the unlock?
Thank you.
For G4 CID unlocking, you need to user Hard/Soft SPL.
same problem
my imate jamin got the same problem. it happens only and only when I remove the battery and when I leave it to charge for 1-2 days the LCD works again and show clear pic. any suggestion? activesync and &... are all ok!
Well, i upgraded to windows Mobile 6, but haven't removed the batterie anymore.
But i'm able to put it off now, what was impossible before.
Hello girls and boys,
yesterday my TC first stuck in tricolor screen and shows
POLA100 RUUNBH
SPL-1.25.0000
CPLD-2
and downwards: USB or SERIAL
It happened as I tried to flash back the original Radio for it. The update monitor showed ERROR 262 (0%), before that I had already installed signed_RUU. for original German WM6-ROM and it worked fine exept the decreasing GSM connection.
After that I searched here the whole night for solutions but none of them (MTTY, Radio Murata, UN-SPL, flash Radio or OS from microSD) helped.
I guess it's all I am able to!
Maybe one of you guys can help me?
Or can anybod tell me whether my TC is dead?
Can anyone tell me the meaning of:
POLA100_____________RUUNBH
SPL-1.25.0000
CPL-2
Thats what my tricolor screen shows!
Maybe someone can tell me where I can get the original German RUU....ship.exe for Polaris.
Did you install HardSPL before playing around with your phone?
Yes I did, and it worked fine exept the bad radio issue.
My TC started to hang as I tried to get back.
Hello,
I have a few problems with my Touch Pro.
First off it's keep saying that there is a headset connected i've tried to clean the connector's soft- hardreset but with out any luck, also searched the internet but no one has a solution even a reg fix would be great but can't find anything on it.
So i want to send it to HTC because i still have waranty but...
The second problem is that the boot screen is changed some how, it shows a kind of BIOS screen like a PC when booting up, the other problem is that i can't find the stock Dutch ROM for the TP which i need for the waranty it had a dutch rom on it when i bought it.
If anyone could help i it would be great
greetings ruudjuhnl