Hello,
I have a few problems with my Touch Pro.
First off it's keep saying that there is a headset connected i've tried to clean the connector's soft- hardreset but with out any luck, also searched the internet but no one has a solution even a reg fix would be great but can't find anything on it.
So i want to send it to HTC because i still have waranty but...
The second problem is that the boot screen is changed some how, it shows a kind of BIOS screen like a PC when booting up, the other problem is that i can't find the stock Dutch ROM for the TP which i need for the waranty it had a dutch rom on it when i bought it.
If anyone could help i it would be great
greetings ruudjuhnl
Related
After I tried to upgrade the rom to WM6, my JAMin got stuck at bootloader. After that, I tried to flash WM5 roms without success and suddenly (after a reset) the screen became white with some horizontal and vertical lines constantly moving. I discovered that it was only the screen that was garbled as it still connected to PC, so I installed (without seeing anything on my JAMin) the NVID ROM trying to restore it. It installed sucessfully, but the screen remained garbled with the white background and random lines. I know it was sucessfully installed because I heard the typical "welcome" sound before configuration.
Do you know any way to restore the screen? Or must I send it to I-Mate to repair?
You can try and reattach the screen cable to the rest of the device, but this will boid any warranty you have, and may damage your device further. If the device is under warranty, I would suggest flashing the ROM the device came with (unfortunately the FTP server is down at the moment, so it might take some fishing around for) and sending the device back to get repaired properly.
mpmf said:
After I tried to upgrade the rom to WM6, my JAMin got stuck at bootloader. After that, I tried to flash WM5 roms without success and suddenly (after a reset) the screen became white with some horizontal and vertical lines constantly moving. I discovered that it was only the screen that was garbled as it still connected to PC, so I installed (without seeing anything on my JAMin) the NVID ROM trying to restore it. It installed sucessfully, but the screen remained garbled with the white background and random lines. I know it was sucessfully installed because I heard the typical "welcome" sound before configuration.
Do you know any way to restore the screen? Or must I send it to I-Mate to repair?
Click to expand...
Click to collapse
Hi frd,
I have exactly the same problem!
Nothing , only the f*** white screen!
I can browse the device via active sync, can rcv calls but the white screen.
I have checked the ribbon connector of the LCD and make reflashing some ROMs but nothing.
I still wondering is it hardware or software problem!
Please let me know if you have progress!
Thanks
G.
Try to replace LCD module, I think thats right way.
It will be a hard ware problem. Probably the ribbon cable as the screen is showing something so it must be working at least a bit.
Hello,
i have the same Problem with my QTEK S200.
First i changed the Rom and it worked perfectly for two days.
Then i had to change my Sim card and after that the problem came again.
I tryed a lot of times to reflash the rom but the problem persist.
How can it be that it worked again for some days ?!
is it the touchscreen of the lcd unit i have to replace ?
is it possible to do it by my self ?
thanks for your help !
Hi everyone.
I had a similar problem an hour ago (Qtek S200 G3):
I Upgraded to a 6.1 rom and then to another, after that my device was stuck in bootloader(3 colour screen). Any 6.1 rom that I tried would install, but after installation device always boot in to the 3 colour screen.
I tried this original shipped rom http://files.mail.ru/HZUAH1 (it's WorldWidwEnglish) (to download just click the link "скачать" or the file name RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
) and it installed!!! It TAKES A WHILE TO INSTALL!!! But it worked!!!
May want to try it.
Hope this helps.
hello,
picture on screen was immediatly clean again ( bootload image ).
it was impossible to change the rom because i have a G4 model.
i flashed the rom with another french rom for G4 and it worked perfekt.
now i tried to remove the battery again for 3 seconds and now i have the same problem again. really strange ....
i tryed the same procedure again but no success.
I reinstalled differents rom's again starting always installation from bootloader.
After about 10 new installations i've clean picture again.
now i'll not put off, restart, or take of battery till one of you know what's the problem.
Thank you for your help !!
are you guys sure its not an intermitant hardware problem, it sounds like it to me. if yu were able to get a clean picture for a short time and now its white again, it cannot be the rom? As for replacing it, nothing is impossible and there is always ebay and google
QTEK S200 G4 CID unlock
How can I CID unlock a device that need´s that to upgrade the Rom?
Is there already any program that , Lockwiz dont do the job, can performe the unlock?
Thank you.
For G4 CID unlocking, you need to user Hard/Soft SPL.
same problem
my imate jamin got the same problem. it happens only and only when I remove the battery and when I leave it to charge for 1-2 days the LCD works again and show clear pic. any suggestion? activesync and &... are all ok!
Well, i upgraded to windows Mobile 6, but haven't removed the batterie anymore.
But i'm able to put it off now, what was impossible before.
Hi, I've got an Imate Jamin (win 6.1) that was working fine till a couple of days ago. It would freeze once in a while when I sent out balance check SMS but it was ok otherwise. Now thought, the call alert sounds are gone, it only vibrates. Windows Media player runs the files but I get no sound at all. The voice clarity during call is good, its as per usual but I can't even get screen tap sounds out of it otherwise.
Anyone else with the same problem? And can anyone help me out? I thought maybe it was all the soft resets from after the freezes that corrupted the windows or something like that but flashing the PDA with another ROM hasn't helped.
And back to to original rom doesn't solve it? I had the same thing with my magician and solved it by flash back to the original rom.
I googled the problem and found out it was a common problem with their model, its the hardware messing up. My set was under warranty so I had it fixed. Now I got other problems...
jack in put headphone erro
Hello, thankyou everyone who takes the time to read this and to help. My HTC Touch Pro, the screen is completely black, it turns on and I can recieve calls and I know the keyboard works, but I cant even tell who it is or what I'm typing since the screen is blacklight and won't show anything. It powers on and off and charges and i can hear the sounds so I think its just a problem with the screen.
I've tried MyMobiler and Pocket Controller, but both cant work for me because I first need to connect to Activesynce or Windows Mobile Device Center, but I can't even see the password I'm typing so I can't unlock the phone to view it on my computer (( so I can't get it to connect to activesync or WMDC.
I really wish it was'nt locked with a password because then everything would be easier I'm so upset by this DDD:
I can't hard reset either because I can't see the screen at all.
Should I try to open it up and replace the screen&digitizer myself? I really don't want to try spending extra money fooling around with the phone if I'm not sure it'll work.
What I'd really love to know, does anybody know how to view the phones screen on the computer without having to unlock the password first from the phone? If anyone can help me with that or find some other method than I'd realyREALLYReallyyyy appreciate that sooo much. I could just type the password from the computer or hard reset and everything.
Or if theres any other method of fixing this that would help too...
Also, I can't take it to Sprint store because its out of warranty/insurance, so
I'm just trying to repair it myself. I've heard of this happening to people before but have'nt ever seen it get fixed.
Again, THANKYOU to anyone thats reads or tries to help !
Have you tried "Hard-Resetting" using the 3 Key Combo? (Hardware Mode)
Or were you trying with the "Clear Data" option? (Software Mode)
I had this when I went snowboarding with my Touch Pro. Turns out slamming the slider shut quite hard fixed the problem.
Hope it helps.
Hi Friends,
I have using HTC S710 for almost 3 years now. It has been a very good phone and i just love it.
I have recently started facing a problem where when i open my QWERTY keyboard screen goes blank and shows a bright light.
all other things functions well. like if m playing songs it will continue or if i wish to dial some1 i can.
Can some1 suggest me how to fix this.
Thanks in advance
Nitin
Sorry by mistake created a sinilar post.
can someone help me in deleting this one
new to forum.
nitin1599 said:
Hi Friends,
I have using HTC S710 for almost 3 years now. It has been a very good phone and i just love it.
I have recently started facing a problem where when i open my QWERTY keyboard screen goes blank and shows a bright light.
all other things functions well. like if m playing songs it will continue or if i wish to dial some1 i can.
Can some1 suggest me how to fix this.
Thanks in advance
Nitin
Sorry by mistake created a sinilar post.
can someone help me in deleting this one
new to forum.
Click to expand...
Click to collapse
You can restore the factory settings or reflash the rom. If the problem persists, the cable or screen of the phone may be broken.
I have already done the reset available in phone.
i have also tried updating and putting new ROM but everytime i do that i get errors like " Image currupted" or " Invalid vendor ID" I have even tried unlocking the phone using USPL n stuffs but no use. (Probably m not doing it rite )
The problem with phone is when openin the QWERTY keypad the display goes blank or hazzy n returns after some 30 seconds(Display time our time)
Dont know wat to do
and now the green flashy led is also not working
whenever i connect my phone to PC it shows RED light there
dont know wats happening
Please help
Most probably the flex cable that connects the upper and lower body has a problem. Probably the connector at the lower part has come loose slightly and opening the device pulls the flat cable edge to bend the connector so that you see the effect you describe.
You will not be able to fix it without opening the device - and this is not simple with the VOX. Do not try to fix that without opening the device as you may completely kill the flat cable this way.
Thanks for repling buddy
But iam a bit afraid to open my VOX as i dnt wanna spoil it more
i tried updating the ROM also but couldnt
Probably i need a better guide on unlocking and installing new ROMS.
Any pointers will be helpful
Thanks
You will not solve a HW problem with new SW. Get a good dis-assembly guide for the VOX - this will help you.
Hmm...
but still i think i will need alot of courage to open my VOX
I have a guide with me which seems to be good enough. Anywaz will give it a try some day
As off now i have just completed updating a new ROM (Windows Mobile 6.5 Official by frauhottelmann) It is nice and good but as u suggested hasnt resolved my problem
Also Audio manager isnt working for me
Thanks for your inputs buddy
nitin1599 said:
Hmm...
but still i think i will need alot of courage to open my VOX
I have a guide with me which seems to be good enough. Anywaz will give it a try some day
As off now i have just completed updating a new ROM (Windows Mobile 6.5 Official by frauhottelmann) It is nice and good but as u suggested hasnt resolved my problem
Also Audio manager isnt working for me
Thanks for your inputs buddy
Click to expand...
Click to collapse
Be careful nitin !!! you'd better bring it to a service center , than you lose warranty just because seal is broken when you try to open it ..
There is no warranty after 3 years, I think - at least not in Germany
Hi guys,
i have a HTC Touch Pro and I wanted to sell it.
But some times ago I put a custom firmware on it
and now i want to change it with the original firmware.
The problem is the fact that I cant connect to my mobile
over the Windows Mobile Center.
And without a Connection to Win 7 i cannot change the firmware.
Does anybody know an Advise?
It is a German phone by the way.
angeloski said:
Hi guys,
i have a HTC Touch Pro and I wanted to sell it.
But some times ago I put a custom firmware on it
and now i want to change it with the original firmware.
The problem is the fact that I cant connect to my mobile
over the Windows Mobile Center.
And without a Connection to Win 7 i cannot change the firmware.
Does anybody know an Advise?
It is a German phone by the way.
Click to expand...
Click to collapse
There is stillt the posibility to put your phone into bootscreen. just try doing a hard reset and but don't reset it. you only need to get to the screen with the red, green, blue and white bar.
If you are there, it should say "serial" on the bottom of the screen. Next step, plug your phone into usb... it should now say "usb" on the bottom of the screen.
If it says usb, you should be able to Flash any rom, even without a connection to Windows Mobile Center.
Hope it words for you!
Cause that's the way it works for me, if I can't connect.
Just let me know if it worked!
Oh by the way^^ my phone is also a German one...^^